SB WR069B User manual

ank you for purchasing from SafetyBasement.com! We appreciate your business.
We made this simple manual to help you enjoy your new product as quickly and easily as
possible.
Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com
for the latest available manual.
INSTRUCTION MANUAL
Men’s Digital Video Watch Recorder
SB-WR069B
Revised: July 9, 2013

Page 2
PRODUCT MANUAL Digital Video Watch Recorder : SB-WR069B
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT REFERENCE
WR069B Watch
Wall
Charger
What’s Included with
Your WR069B
USB Cable
USB Port
A BUTTON /
PHOTO / AUDIO
B BUTTON /
POWER / VIDEO
Time Adjuster
Camera
Status Light
(Red & Blue)

PRODUCT MANUAL Digital Video Watch Recorder : SB-WR069B
Page 3
www.SafetyBasement.com Phone: [phone] Fax: [phone]
CHARGING
Before you use your video watch recorder,
you should charge it for several hours.
You can do this by connecting your watch
to your computer’s USB port, or use the
included wall adapter.
For now, please connect to your PC. We will
need to be connected to set your time and
date.
You do not need to download any drivers to connect your watch to a PC or Mac.
Simply connect the USB cable to your watch. Connect the other end directly to a USB port
on your PC. Do not use a hub.
In a few moments, your PC will automatically connect to the watch. e rst time, it may
install standard drivers. is is normal. Your watch will charge while connected, and you
can also access the les on it.
You can now use the watch as you would any external drive or USB ash drive.
Remember to EJECT your device before pulling the USB cable out.

Page 4
PRODUCT MANUAL Digital Video Watch Recorder : SB-WR069B
www.SafetyBasement.com Phone: [phone] Fax: [phone]
DOWNLOADS
Go to the Product Page for your device on
SafetyBasement.com and locate the red
TECH SUPPORT tab, as shown in this
example.
You will nd the latest manual here, along
with any les you may need.
Right-click on the TIME.TXT le, and
choose SAVE LINK AS, or SAVE TARGET
AS...
Save the le to your watch, as shown in this
example.
Note: some computers may NOT show the
“.txt” in the lename. is is normal.
Your Drive Letter may vary.
Do NOT save the Time le inside the
DCIM folder.
TECH SUPPORT
and available les

PRODUCT MANUAL Digital Video Watch Recorder : SB-WR069B
Page 5
www.SafetyBasement.com Phone: [phone] Fax: [phone]
SETTING THE TIME & DATE
Now that the Time.txt le is saved on your
watch, Double-Click the le.
A standard text editor should open the le.
In Windows, this would be Notepad. On a
Mac, it would be TextEdit.
Adjust the Year-Month-Day (SPACE)
Hour:Minutes:Seconds as needed.
e punctuation and SPACE must remain.
When nished, SAVE this le.
Close the text editor.
To use the Time and Date you set, you must EJECT the watch from your PC and power it
up.
EJECT the watch from your PC. In Windows, right-click on the drive letter and choose
Eject. Wait for Windows to say it’s okay to remove the device.
Now, unplug the USB cable from the computer, then from the watch.
HOLD the B BUTTON until the Red and Blue light appear. en, the Blue light will remain
steady. You are now in Stand By Mode. Your time is now set. Should the timestamp be
wrong in your les, please redo the setup.
NOTE: It is normal for the time.txt le to be deleted during power up. If it’s still there,
something is wrong with the le.