Sceptre E405BD-FMQR User manual

(DVD) FMQR Series P1
E405 Series User Guide
PACKAGE CONTENTS
SCEPTRE Display x 1
Display Base x 1
Display Neck
Thick Threaded Screws (ST4x14mm) x 4
Plastic Ring x 1
Metal Plate x 1
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)
ATTACHING & REMOVING THE BASE
1. To install or remove the neck, screw in or remove the 5 fine threaded screws indicated in the picture.
2. Place the display unit flat on a table. Afterwards attach the plastic base onto the neck by form fitting the circular
hole. Remember the plastic base should have more area facing the front of the neck. Fit the plastic ring first to the
bottom of the base, then the metal plate onto the bottom of the base by matching the 3 holes. Screw in the 4 thick
threaded screws to secure the metal plate to the plastic base. The stand installation is now complete.
3. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we would recommend you to use a Display safety strap (not
included) in order to minimize the possibility of the Display toppling over.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.

(DVD) FMQR Series P2
Rear View Mounting Pattern
Mounting Specification: 200mm x 200mm using screw size M5. The top two screws have 12mm depth and the bottom
two screws have 6mm depth. Please Note: The depth of screw refers to how deep the screw can go inside the mounting
holes. When you’re buying screws, you should add the original depth to the thickness of your mounting plate in order to
get the total screw length.
Connecting Your Cables
The following picture offers a suggestion for connecting most of your audio video equipment.
TV Tuner is optional. It may or may not be equipped in your product. Please check with the authorized seller, authorized distributor
or Sceptre Customer Service for further information.

(DVD) FMQR Series P3
Ready to Watch Some TV? (Optional)
1. Make sure your power cable is connected and the standby red light in the front of the HDTV is lit
up.
2. Check all your connection cables off the side or the back of your HDTV and also your AV
devices. Make sure they are all connected securely.
3. Turn on your HDTV and other AV devices if necessary. Select “HOME MODE”.
4. Press the button on the side of the HDTV or the SOURCE button on the remote control and
select the correct source according to the Connecting pages.
If You’ve Connected Antenna to the HDTV…
If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go through
an INITIAL SETUP process in order to watch the HDTV.
1. Press MENU to open the menu
2. Use the ◄ or ► button to select the CHANNEL icon and press ENTER.
3. Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or ► to select your connection
either AIR or CABLE.
4. Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and press ENTER to scan for
channels.
5. Once the scanning finishes, you can begin to watch HDTV

(DVD) FMQR Series P4
If You’ve Connected Cable or Satellite Set-top Boxes to the HDTV…
1. Press the button on the side of the FHD Display or the SOURCE button on the remote
control and you will see the picture above.
2. Use ▲▼ buttons to select the source you want to switch to and press the ENTER button in the
middle of the ▲▼ buttons.
3. If you have connected coax cable (the cable with a needle in the middle and a ring to
tighten the connection) from the box to the display, you’ll need to change to the correct
channel. Make sure your source is TV and press 3 and ENTER on the display’s remote.
If that does not work you’ll need to connect your Satellite or Cable Company for support.
Please Note:
Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting
stations for more information.
The FHD Display’s tuner is designed for FHD Display therefore requires a stronger
signal than normal Displays. If you cannot achieve that signal level with your antenna
or cable, your FHD Display might lose picture or sound.
HDMI 2 doubles as a MHL enabled port, so if you have a cell phone that
supports the Mobile High-definition Link, you can purchase a MHL cable and
connect it to HDMI 2.
HDMI2 supports MHL devices such as ROKU MHL streaming stick device.
Recycling Information
Dispose unwanted electronics and batteries through an approved recycler.
For TVs please visit the web at http://www.earth911.com/recycling-guide/how-to-recycle-large-electronics/
For Batteries please visit the web at http://www.call2recycle.org/

(DVD) FMQR Series P5
Call Us If You Need Help!
Products are often returned due to a technical problem rather than a defective product that may result in
unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem
over the phone or email. For more information on warranty services or repairs after the warranty period,
please contact our support department at the number below.
For technical help, contact our Technical Support Group via email or phone. Please have your Product
Number (P/N), Serial Number (S/N), and date of purchase available before you call.
Operation Hours: Mon - Fri at 8:30 AM –5:30 PM (PST)
Tech Support E-mail: [e-mail]
Customer Service Email: [e-mail]
TEL: [phone]
SCEPTRE Remote Control
Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols
on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the
battery cover.
Please note:
Only use AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire
risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk
or lead to personal injury.
Dispose the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
If the remote control is not used for a long time, remove the batteries.
Keep the remote control away from moisture, sunlight, and high temperatures.

(DVD) FMQR Series P6
This remote control follows SONY’s universal remote code. To find the actual code you need to consult your cable or
satellite tech support.

(DVD) FMQR Series P7
TV/DVD Remote Description
1. POWER –Turns the TV on or off.
2. INFO –Shows the display info.
3. FREEZE –Press this button to freeze the picture on the screen.
4. SLEEP –Turns the TV off in a specific set of time dependent on your selection.
5. CC –Cycles between different closed captioning modes.
6. MTS –Selects stereo, mono, or second audio programming.
7. FAVORITE –Gives you, the favorite channels list.
8. ADD/DEL –This button adds or deletes a channel from the favorite channels list.
9. NUMBER BUTTONS (0-9) –Press 0-9 to select a TV channel directly when you are watching TV. For switching
DVD chapters over 100 the 0 button acts as the 100 button, so press the 0 button twice to get that chapter.
10. (-)–Inserts the dash for selecting digital channels directly.
11. R –Returns to the previous channel. For switching DVD chapters over 100 the R button acts as the 100+ button, so
press the R button and the number you want to switch to. For example for chapter 125 you would press R and 2
and 5 for the combination of 125.
12. PICTURE –Selects various preset picture settings.
13. SOUND –Selects various preset sound settings.
14. VOL(+) / VOL(-) –Press the VOL buttons to increase or decrease the sound level.
15. CH(+)/CH(-) –Press the CH buttons to go through the channel list.
16. MUTE –Turns the sound off from the TV. To unmute either press VOL(+) or press the MUTE button again.
17. ASPECT –Selects different viewing modes of the TV.
18. GUIDE –Opens the current digital channel information guide (antenna only).
19. MENU –Brings up the main TV menu on the screen.
20. ▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV’s menu and the DVD’s menu.
Press the ENTER button when you want to select a particular option.
21. SOURCE –Press this button to cycle through the INPUT source.
22. EXIT –Exit the main TV menu on the screen.
23. AUTO EJECT –Press this button to open or close the DVD player.
24. D.MENU –Shows the menu of the DVD disc.
25. DVD –Press this button to go to the DVD source.
26. ►/║ –Play/pause button in DVD mode.
27. ■ –Stop button in DVD mode.
28. REPEAT –Press this button for repeat the program.
29. AB –Press this button for repeat play point A and B
30. PREVIOUS CHAPTER –Press this button to select the DVD’s previous chapter.
31. REWIND –Press this button to reverse the DVD movie to a previous scene.
32. FAST FOWARD –Press this button to fast forward the DVD to the next scene.
33. NEXT CHAPTER –Press this button to select the DVD movie’s next chapter.
34. D.SETUP –Press this button to setup the disc in DVD mode.
35. TITLE –Press this button to go to the title menu if the DVD you’re watching has a title page.
36. SUBTITLE –Displays the subtitle.
37. AUDIO –Press to select TV sound option.
The following buttons are functions designed to work with the optional, Sceptre Sound Bar.
1. POWER –This button turns on the sound bar.
2. SOURCE –This button selects the sound bar’s source.
3. MODE –This button selects the sound bar’s sound modes.
4. VOL(-) –This button decreases the volume of the sound bar.
5. VOL(+) –This button increases the volume of the sound bar.
Please Note:
To insert, eject a disc from the DVD player, to use any functions on the DVD you must press the DVD
button first.
This display does not support QAM function. You need to have a digital cable box in order to receive
cable channels.
The remote picture might be different from the actual remote. Please refer to the user manual on our
website http://www.sceptre.com

(DVD) FMQR Series P8
INSERTING A DVD *optional
With the display turned on and the DVD button pressed from the display remote, you can now insert the
DVD disc you want to play. When you are facing the front of the display, insert the DVD disc with
the side that is labeled with the movie title facing away from you.
DVD Drive Buttons
1. EJECT –Press this button to eject the DVD disc.
2. PLAY / PAUSE –Press this button to play the DVD disc or to pause the DVD disc.

(DVD) FMQR Series P9
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.
Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord and power
cord supplied with this unit.
The Federal communications Commission warns that changes or modifications to the unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage
Directive (72/23/EEC) issued by the Commission of the European Community.
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your
Liquid Crystal Display, please read the following precautions carefully before using the product.
1. Read & Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
12. Unplug this apparatus during lightening storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

(DVD) FMQR Series P10
IMPORTANT INFORMATION
Disclaimer, Trademarks, & Copyright Information
“HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
SRS TruSurround HD is a trademark of SRS Labs, Inc.
TruSurround HD technology is incorporated under
license from SRS Labs, Inc. SRS TruSurround HD™ creates an immersive, feature-
rich surround sound experience from two speakers, complete with rich bass, high frequency detail and
clear dialog.
Wii™ is a registered trademark or trademark of Nintendo of America, Inc. in the United States and other
countries.
MHL® and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and /or other countries.
This product qualifies for ENERGY STAR in the “power
saving” mode and this is the setting in which power
savings will be achieved. Changing this mode under
picture settings or enabling other features will increase
power consumption that could exceed the limits
necessary to qualify for ENERGY STAR rating. For more information on the ENERGY
STAR program, please refer to www.energystar.gov.
SCEPTRE is a trademark or registered trademark of Sceptre Group.
Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from furnishing this material, or the performance or use of
this product.
In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product
specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from Sceptre, Inc.