Sceptre E325 User manual

(DVD)SR Series P1
E325 Series User Guide
PACKAGE CONTENTS
SCEPTRE Display x 1
TV Foot x 2
Screws x 4
Power Cord x 1 (attached)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)
ATTACHING & REMOVING THE BASE
1. To install the 2 TV feet, attach them to the bottom of the TV and screw in the 4 screws indicated in the
picture. Remember the SCEPTRE word on the feet faces the front. To remove them, simply unscrew the
4 screws and the feet will come off.
2. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we would recommend you to use a Display safety
strap (not included) in order to minimize the possibility of the Display toppling over.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.
BXSV53CD

(DVD)SR Series P2
Rear View Mounting Pattern
Mounting Specification: 200mm x 100mm using screw size M4. Length of screw should not
exceed 6mm. Please Note: The 6mm length of screw refers to how deep the screw can go inside
the mounting holes. When you’re buying screws, you should add the original 6mm to the
thickness of your mounting plate in order to get the total screw length.
TV Tuner is optional. It may or may not be equipped in your product. Please check with the authorized seller, authorized
distributor or Sceptre Customer Service for further information.
Connecting Your Cables
The following picture offers a suggestion for connecting most of your audio video equipment.
Connecting Your Cables (Alternative Pattern)

(DVD)SR Series P3
Ready to Watch Some TV? (Optional)
Starting up the HDTV
1. Make sure your power cable is connected and the standby red light in the front of the
TV is lit up.
2. Check all your connection cables off the side or the back of your TV and also your AV
devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select HOME mode for power saving or VIVID mode for full performance.
5. Select the correct input source according to the Connecting pages.
If You Have Connected Antenna to the TV…
If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go
through an INITIAL SETUP process in order to watch the TV.
1. Turn on the TV and select VIVID mode for full performance or HOME mode for power
saving.
2. Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or ► to select your
connection either AIR or CABLE.
3. Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and press ENTER to
scan for channels.
4. Once the scanning finishes, you can begin to watch TV.

(DVD)SR Series P4
If You’ve Connected Cable or Satellite Set-top Boxes to the HDTV…
1. Press the button on the side of the HD Display or the SOURCE button on the
remote control and you will see the picture above.
2. Use ▲▼ buttons to select the source you want to switch to and press the ENTER
button in the middle of the ▲▼ buttons.
3. If you have connected coax cable (the cable with a needle in the middle and a ring
to tighten the connection) from the box to the TV, you’ll need to change to the
correct channel. Make sure your source is TV and press 3 and ENTER on the
TV’s remote. If that does not work you’ll need to connect your Satellite or Cable
Company for support.
Please Note:
Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
The HD Display’s tuner is designed for HD Display therefore requires a
stronger signal than normal Displays.If you cannot achieve that signal level
with your antenna or cable, your HD Display might lose picture or sound.
HDMI 1 doubles as a MHL enabled port, so if you have a cell phone that
supports the Mobile High-definition Link, you can purchase a MHL cable
and connect it to HDMI 1.
HDMI 1 supports MHL devices such as ROKU MHL streaming stick
device.
Recycling Information
Dispose unwanted electronics and batteries through an approved recycler.
For TVs please visit the web at http://www.earth911.com/recycling-guide/how-to-recycle-large-
electronics/
For Batteries please visit the web at http://www.call2recycle.org/

(DVD)SR Series P5
SCEPTRE Remote Control
Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-)
symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards,
re-attach the battery cover.
Please note:
Only use AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage that may pose a
fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
Dispose the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
If the remote control is not used for a long time, remove the batteries.
Keep the remote control away from moisture, sunlight, and high temperatures.

(DVD)SR Series P6
This remote control follows SONY’s universal remote code. To find the actual code you need to
consult your cable or satellite tech support. Your TV could contain either remote.
Version 1
Version 2

(DVD)SR Series P7
GENERAL FUNCTION BUTTONS (Version 1)
POWER –Turns the display on or off.
INFO –Shows the display info.
NUMBER BUTTONS (0-9) –Press 0-9 to select a TV channel directly when you are watching TV. The
channel will change after 2 seconds. For switching DVD chapters over 100 the 0 button acts as the 100
button, so press the 0 button twice to get that chapter.
(-) –Inserts the dash for selecting digital channels directly.
R –Returns to the previous channel. For switching DVD chapters over 100 the R button acts as the 100+
button, so press the R button and the number you want to switch to. For example for chapter 125 you would
press R and 2 and 5 for the combination of 125.
VOL(+)/VOL(-) –Press the VOL buttons to increase or decrease the sound level.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV’s menu and the DVD’s
menu. Press the ENTER button when you want to select a particular option.
CH(+)/CH(-) –Press the CH buttons to switch to the next or switch to the previous channel.
MENU –Brings up the main display menu on the screen.
GUIDE –Opens the current digital channel information guide (antenna only).
EXIT –Exit the main display menu on the screen.
SOURCE –Press this button to cycle through INPUT source.
CC –This button enables closed captioning for the optional TV tuner.
MUTE –Turns the sound off from the display. To un-mute either press VOL(+) or press the MUTE button
again.
PICTURE –Selects various preset picture settings.
SOUND –Selects various preset sound settings.
ASPECT –Cycles through different display zoom modes or crop modes of the picture.
SLEEP –This button cycles through the time the TV will wait until automatic shut off.
FAV –This button switches to different favorite channels.
F.ADD/DEL –This button adds or deletes a favorite channel.
AUTO EJECT –Press this button to open or close the DVD player.
D.MENU –Shows the menu of the DVD disc.
D.SETUP –Press this button to setup the disc in DVD mode.
SUBTITLE –This button cycles through available subtitles based off the DVD disc.
►/║ – Play/pause button in DVD mode.
■ –Stop button in DVD mode.
REPEAT –Press this button to repeatedly play the current DVD disc.
A-B –Press this button once to set loop playing between two points A and B.
PREVIOUS CHAPTER –Press this button to select the DVD’s previous chapter.
REWIND –Press this button to reverse the DVD movie to a previous scene.
FAST FOWARD –Press this button to fast forward the DVD to the next scene.
NEXT CHAPTER –Press this button to select the DVD movie’s next chapter.
TITLE –Press this button to jump back to the title of the DVD disc.
AUDIO –Press this button to cycle through different audio tracks of the DVD disc.
DVD –Press this button to switch to the source DVD to start using the built in DVD drives.
HDMI –Press this button to switch to the sources of HDMI.
TV –Press this button to switch to the source with the TV tuner.
USB –Press this button to switch to the source with the USB connection.
YPRPR –Press this button to switch to the source YPbPr (with green, blue, red, RCA connectors).
The following buttons are functions designed to work with the optional, Sceptre Sound Bar.
POWER –This button turns on the sound bar.
SOURCE –This button selects the sound bar’s source.
MODE –This button selects the sound bar’s sound modes.
VOL(-) –This button decreases the volume of the sound bar.
VOL(+) –This button increases the volume of the sound bar.
Please Note:
The remote picture might be different from the actual remote. Please refer to the user manual on our
website http://www.sceptre.com.

(DVD)SR Series P8
GENERAL FUNCTION BUTTONS (Version 2)
1. POWER –Turns the display on or off.
2. INFO –Shows the display info.
3. NUMBER BUTTONS (0-9) –Press 0-9 to select a TV channel directly when you are
watching TV. The channel will change after 2 seconds. For switching DVD chapters over
100 the 0 button acts as the 100 button, so press the 0 button twice to get that chapter.
4. (-) –Inserts the dash for selecting digital channels directly.
5. R –Returns to the previous channel. For switching DVD chapters over 100 the R button acts
as the 100+ button, so press the R button and the number you want to switch to. For
example for chapter 125 you would press R and 2 and 5 for the combination of 125.
6. VOL(+)/VOL(-) –Press the VOL buttons to increase or decrease the sound level.
7. ▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV’s menu
and the DVD’s menu. Press the ENTER button when you want to select a particular option.
8. CH(+)/CH(-) –Press the CH buttons to switch to the next or switch to the previous channel.
9. MENU –Brings up the main display menu on the screen.
10. GUIDE –Opens the current digital channel information guide (antenna only).
11. EXIT –Exit the main display menu on the screen.
12. SOURCE –Press this button to cycle through INPUT source.
13. PICTURE –Selects various preset picture settings.
14. MUTE –Turns the sound off from the display. To un-mute either press VOL(+) or press the
MUTE button again.
15. AUTO EJECT –Press this button to open or close the DVD player.
16. D.MENU –Shows the menu of the DVD disc.
17. D.SETUP –Press this button to setup the disc in DVD mode.
18. PREVIOUS CHAPTER –Press this button to select the DVD’s previous chapter.
19. REWIND –Press this button to reverse the DVD movie to a previous scene.
20. FAST FOWARD –Press this button to fast forward the DVD to the next scene.
21. NEXT CHAPTER –Press this button to select the DVD movie’s next chapter.
22. ►/║ – Play/pause button in DVD mode.
23. ■ –Stop button in DVD mode.
24. REPEAT –Press this button for repeat the program.
The following buttons are functions designed to work with the optional, Sceptre Sound Bar.
25. POWER –This button turns on the sound bar.
26. SOURCE –This button selects the sound bar’s source.
27. MODE –This button selects the sound bar’s sound modes.
28. VOL(-) –This button decreases the volume of the sound bar.
29. VOL(+) –This button increases the volume of the sound bar.
Please Note:
The remote picture might be different from the actual remote. Please refer to the user manual
on our website http://www.sceptre.com.

(DVD)SR Series P9
INSERTING A DVD
With the display turned on and the DVD button pressed from the display remote, you can now insert the
DVD disc you want to play. When you are facing the front of the display, insert the DVD disc with
the side that is labeled with the movie title facing away from you.
Side Control Buttons
1. VOL(+) –This button increases the Display’s volume. If a sub-menu is active, pressing this button
will move the select right.
2. VOL(-) –This button decreases the Display’s volume. If a sub-menu is active, pressing this button
will move the selection left.
3. CH(▲)–This button changes the Display channel up. If the OSD is active, this button functions as
up for the menu.
4. CH(▼)–This button changes the Display channel down. If the OSD is active, this button functions
as down for the menu.
5. –This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this
button will exit the OSD.
6. –This button switches between all the different sources of the Display. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
7. –Turn on the Display by pressing the button once. Press the button again to turn off the Display.

(DVD)SR Series P10
DVD Drive Buttons
1. EJECT –Press this button to eject the DVD disc.
2. PLAY / PAUSE –Press this button to play the DVD disc or to pause the DVD disc.
Call Us If You Need Help!
Products are often returned due to a technical problem rather than a defective product that may result in
unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem
over the phone or email. For more information on warranty services or repairs after the warranty period,
please contact our support department at the number below.
For technical help, contact our Technical Support Group via email or phone. Please have your Product
Number (P/N), Serial Number (S/N), and date of purchase available before you call.
Operation Hours : Mon - Fri at 8:30 AM –5:30 PM (PST)
Tech Support E-mail: [e-mail]
Customer Service Email: [e-mail]
TEL : [phone]
Energy Disclaimer
Figure estimates off the Energy Guide yellow label are based on a specific usage pattern with the power saving mode
selected under picture mode / picture setting of this product. Other picture settings / picture modes selected will consume
more power than the estimate. Energy Guide labels will not always reflect your current electricity prices. They may also
vary due to local energy prices and user's usage habits.

(DVD)SR Series P11
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired
operation.
Please Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Caution: To comply with the limits for an FCC Class B computing device, always use the signal
cord and power cord supplied with this unit.
The Federal communications Commission warns that changes or modifications to the unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment.
European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the
Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
SAFETY INSTRUCTIONS
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:
1. Use only cabinets or stands recommended by the manufacturer of the television set.
2. Use only furniture that can safely support the television set.
3. Make sure the television set is not overhanging the edge of the supporting furniture.
4. Do not place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both
the furniture and the television set to a suitable support.
5. Do not place the television set on cloth or other materials that may be located between the television set and
supporting furniture.
6. Make sure to warn and educate children about the dangers of climbing on furniture to reach the television set
or its controls.
7. Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.
8. The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc. Install in accordance with the manufacturer’s instructions.
9. No naked flame sources, such as lighted candles, should be placed on the apparatus.
10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 90% non-condensing, altitude: 0~2000 m.
1. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases,
shall not be placed on apparatus.
2. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
3. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.

(DVD)SR Series P12
IMPORTANT INFORMATION
Disclaimer, Trademarks, & Copyright Information
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.”
Wii™ is a registered trademark or trademark of Nintendo of America, Inc. in the United States and other
countries.
MHL® and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and /or other countries.
This product qualifies for ENERGY STAR in the “power
saving” mode and this is the setting in which power
savings will be achieved. Changing this mode under
picture settings or enabling other features will increase
power consumption that could exceed the limits
necessary to qualify for ENERGY STAR rating. For more information on the ENERGY
STAR program, please refer to www.energystar.gov.
This equipment is a Class II or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical
earth.
SCEPTRE is a trademark or registered trademark of Sceptre Group.
Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from furnishing this material, or the performance or use of
this product.
In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product
specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from Sceptre, Inc.