Schreder VIS-J1006 User manual

Instruction Manual
Total Sky Camera
Update to the latest Cloudcam version
Automatic Sky Imaging System
C M S I n g . D r. S c h r e d e r G m b H
Lofe re r st r a ße 32 , A-6 3 22 Ki rch b ic hl
e l . : 0 0 4 3 / ( 0 ) 5 3 3 2 / 7 7 0 5 6 - 0 0
F a x . : 0 0 4 3 / ( 0 ) 5 3 3 2 / 7 7 0 5 6 - 1 4
E-Mail: i n f o @ s c h r e d e r - c m s . c o m
Web.: w w w . s c h r e d e r - c m s . c o m

he product VIS-J1006 ( otal Sky Camera) is discontinued by 1st July 2016. he ASI-16
(All Sky Imager) is the next generation with modern electronics. Ongoing Service for the
otal Sky Camera is offered, to keep it a robust working instrument.
Cloud camera so tware update - news 20160927:
It is recommended to install the latest software version 'Cloudcam_Control 3.4.4.1'
including 'Cloudcam_Server 4.5' on your system. In comparison to 'Cloudcam_Control
3.0', it can prevent the All Sky Imager from being damaged by sudden power off. It is more
reliable and offers additional features.
Please go to our www-site: 'http://www.schreder-cms.com/en/camera.htm'
Download the actual zip-File Install_Cloudcam_3_4_4_1.zip (red circle in the fig. below).
Unzip the file and start the installation.
Go into the directory 'Install_Cloudcam'.
Start the installation by pressing 'install.exe'
Cloudcam Manual 2

Press Update/Repair and the the update will be carried out.
press 'Close'. Now the newest Cloudcam_Control software is installed.
Cloudcam Manual 3

Start the Cloudcam_Control.
A version check is carried out.
System will shut down and than restarts again.
Click on 'About'. You can see that the newest version of Cloudcam_Controll and
CloudCam_Server is installed.
Cloudcam Manual 4