SEAL Lincat UM50 Operating instructions

IS287 ECN3321
User and Installation Instructions
Seal Upright Heated Merchandisers
UM50, UM50D, UMS50, UMS50D, UMO50,
UMO50D, UMSO50, UMSO50D

IS287 ECN3321 Page 2
Dear Customer,
Thank you for purchasing this Lincat product.
This is just one of over 450 different items of catering equipment available which is
constantly being extended and improved. Details are available from your local
distributor or direct from us.
Used for the purposes for which it is intended, and with careful maintenance as
outlined in this User Guide, your Lincat product will give years of trouble free use.
IMPORTANT INFORMATION
Please read all of the safety and operating instructions carefully before using
this product. Please pay particular attention to all sections of this User
Guide that carry warning symbols and notices.
WARNING!
This is a Warning symbol. This symbol is used throughout the user
guide whenever there is a risk of personal injury. Ensure that these
warnings are read and understood at all times.
CAUTION!
This is a Caution symbol. This symbol is used throughout the User Guide
whenever there is a risk damaging your Lincat product. Ensure that these
warnings are read and understood at all times. 
NOTE:
This is a Note symbol. This symbol is used throughout the User Guide to provide
additional information, hints and tips.
NOTE

IS287 ECN3321 Page 3
CONTENTS
Contents Page
Safety instructions………………………………………………………4
Product specification………………………………………………….. 5
Features………………………………………………………………….. 5
Technical specification…………………………………………………5
Pack contents…………………………………………………….………6
Spare parts list………………………………………………………….. 6
Installation……………………………………………………………….. 7
Connecting to the electricity supply……………………………. 7
Door handle assembly………………………………………...….7
Operating instructions………………………………………………….8
Humidity feature………………………………………………….. 8
Cleaning and maintenance…………………………………………….9
Replacing the light bulb…………………………………………..9
Service information……………………………………………………..10
Conditions of guarantee…..…………………………………….……..10
USE OF THE UPRIGHT HEATED MERCHANDISERS
AND OVEN MODELS
The Upright Heated Merchandisers are intended to be used on counter tops to
display heated food products.
Those models with integrated ovens can be used to cook a variety of food
products for display in the merchandiser or elsewhere.
Please note that in use, these merchandisers have hot panels. It is
important that provision is provided for placing and removal of food
product into the display cabinet.

IS287 ECN3321 Page 4
SAFETY INSTRUCTIONS
WARNING!
Basic safety precautions, including the following, should be
followed to reduce the risk of personal injury. Make sure you
have read all of these instructions before switching on the unit.
Keep this User Guide in a safe place for future reference for you and your
staff.
Do not clean the unit with a water jet.
REMOVAL OF PACKAGING
In the interest of hygiene, you should clean the product after unpacking and
ensure all plastic coatings are removed before use.
This unit is heavy. Take care when moving it. Do not pull the unit across your
work surface as it is heavy and may make a mark.
The unit relies on the circulation of warm air, which must pass through and
around the shelves. Ensure circulation is not obstructed by food product
or aluminium foil.
GENERAL
Do not try to modify this product.
Ensure that the electrical supply cable is not damaged.
If the supply cable is damaged, it should be replaced by Lincat Ltd or suitably
qualified persons, in order to avoid a hazard.
EQUIPOTENTIALITY
This equipment is provided with an equipotential bonding terminal to
allow earth cross-bonding with other equipment.

IS287 ECN3321 Page 5
FEATURES
TECHNICAL SPECIFICATION
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION
Upright Heated Merchandiser (Rotary rack) – UM50, UM50D
Upright Heated Merchandiser (Static rack) – UMS50, UMS50D
Upright Heated Merchandiser with Oven (Rotary rack) – UMO50, UMO50D
Upright Heated Merchandiser with Oven (Static rack) – UMSO50, UMSO50D
UM50, UM50D, UMS50,
UMS50D
Stainless steel body
Toughened glass
Thermostatic control
Hinged rear door
Hinged front door on ‘D’ models
Independently switchable light
230 Volt, 50 Hz, single phase
Water bath
UMO50, UMO50D,UMSO50,
UMSO50D
(Oven Models)
As UM50, UM50D, UMS50 &
UMS50D plus:
Thermostatic control to oven
Model
UM50
UM50D
UMS50
UMS50D
UMO50
UMO50D
UMSO50
UMSO50D
Volume (gross) litres 110.0 110.0 110.0/20.8 110.0/20.8
Merchandiser
Internal Dims mm
540x540x380 540x540x380 540x540x380 540x540x380
Oven Internal
Dims mm 400x400x130 400x400x130
Width mm 565 565 565 565
Depth mm 565 565 565 565
Height mm 780 780 925 925
Power Rating Watt 1500 1500 2900 2900
Weight (net) kg 36.7 37.3 49.5 50.1

IS287 ECN3321 Page 6
PACK CONTENTS
UM50
Upright Heated Merchandiser
(with cable and 13amp plug)
1 x rotary rack
Water bath/lid
User Guide
Guarantee card
1 x door assembly (see drawing)
UM50D
As UM50 but with 2 doors
UMS50
As UM50, except static rack
UMS50D
As UMS50 but with 2 doors
UMO50
As UM50, plus 1 x chrome plated oven shelf
UMO50D
As UMO50 but with 2 doors
UMSO50
As UMS50, plus 1 x chrome plated oven shelf
UMSO50D
As UMSO50 but with 2 doors

IS287 ECN3321 Page 7
SPARE PARTS LIST
Component
UM50
UM50D
UMS50
UMS50D
UMO50
UMO50D
UMSO50
UMSO50D
Door Bush BU72 BU72 BU72 BU72
Door Catch CA111 CA111 CA111 CA111
Element EL174 EL174 EL174 EL174
Adjustable Foot FE10 FE10
Glass Door GL510 GL510 GL510 GL510
Control Knob KN203 KN203 KN203 KN203
Oven Control Knob KN220 KN220
Lamp LA19 LA19 LA19 LA19
Rotary Rack RD23 RD23
Fixed Rack SD24 SD24
Oven Shelf SH101 SH101
Door Micro Switch SW64 SW64
On/Off Switch SW67 SW67
Light Switch SW68 SW68 SW68 SW68
Oven Thermostat TH46 TH46
Control Thermostat TH77 TH77 TH77 TH77
Glass Door Handle HA78 HA78 HA78 HA78
Oven Door Handle HA50 HA50

IS287 ECN3321 Page 8
INSTALLATION
Ensure the unit is installed on a sound, level work surface, which is heat
resistant e.g. stainless steel or Formica ®. The unit’s external surfaces
and base will become hot. You should inform your personnel and
customers accordingly.
For safety regulations, the plug must always be accessible.
CONNECTING TO THE ELECTRICITY SUPPLY
Ensure that the voltage of your electricity supply corresponds to the
serial plate details. The product is supplied with a 13 Amp plug. To
replace the plug, follow these instructions:
•green and yellow wire to 'E'or (Earth)
•blue wire to 'N'(Neutral)
•brown wire to 'L'(Live)
THIS APPLIANCE MUST BE EARTHED
DOOR HANDLE ASSEMBLY
PLEASE ASSEMBLE GLASS DOOR HANDLE AS SHOWN
NOTE

IS287 ECN3321 Page 9
OPERATING INSTRUCTIONS
UM50 Models
To check operation of the unit, connect it to the electricity supply, switch on the
light (2), then turn the temperature controller to setting 5. Wait until the amber
neon (3) goes out before loading with pre-heated food.
UMO50 Models
Operate the merchandiser as above.
To operate the oven, connect it to the electricity supply, press the On/Off switch
(6) and turn the temperature controller (5) to the desired setting. Wait until the
amber neon (7) goes out before loading with food.
For best results cook and display product on appropriately sized
baking trays.
HUMIDITY FEATURE
The integral water bath with lid is intended to keep certain food products moist,
such as pastry. For best results, fill with warm water to the indicated level.
Do not over fill. To prevent condensation on the glass, ensure you do not
over-load with food. Check the water level occasionally.
This part of the unit will become hot. Take care when removing or
filling the water bath.
1.Temperaturecontroller
2.LightSwitch
3.NeonLight
4.Cable
5.TemperatureController(Oven)
6.On/OffSwitch(Oven)
7.NeonLight(Oven)
1. Water Bath
2. Lid
1
2
NOTE








IS287 ECN3321 Page 10
CLEANING AND MAINTENANCE
CLEANING
Disconnect the unit from the electricity supply and ensure it is cool to touch
before starting to clean. Use a mild detergent in hot water and a soft cloth. Do
not use abrasive creams or scourers.
Merchandiser
Remove display rack ,base-plate and the water tray.
To remove the rotary rack push the rack upwards against the spring loaded pin,
then carefully rotate outwards from the bottom.
To remove the static rack lift out of the holes.
Oven
To remove the oven shelf, pull forward until it stops and lift out.
Lift and remove the base panel.
Racks, shelves, base-plates and water baths may be washed in a dishwasher.
MAINTENANCE
Regular cleaning of the unit is recommended. No regular maintenance is
required, but it may be necessary to replace a light bulb.
REPLACING THE LIGHT BULB
Disconnect the unit from the electricity supply and ensure the unit is
cool to touch.
Remove the light cover by carefully levering. Remove the light bulb by
unscrewing anticlockwise. It is fitted at an angle of 45
0
Fitting the new bulb is the reverse of the above sequence.

IS287 ECN3321 Page 11
SERVICE INFORMATION
GUARANTEE
For help regarding the installation, maintenance and use of your Lincat
equipment, please contact our Service Department:
01522 875520
All service work, other than routine cleaning should be carried out by one of our
authorised service agents. We cannot accept responsibility for work carried out
by other persons.
To ensure your call is service enquiry is handled as efficiently as possible, you
need to have the following details available:
Brief details of problem
Product code, type number and serial number of unit (both on serial plate)
Code number of spare part (see spare parts list), if known
Lincat reserve the right to carry out any work under warranty during normal
working hours, i.e. Monday to Friday, 8.30 a.m. – 5.00 p.m.
This unit carries a comprehensive UK twelve-month warranty. The
guarantee is in addition to, and does not diminish your statutory or legal
rights.
The guarantee does not cover: -
• Accidental damage, misuse (or use not in accordance with the instructions in
this User Guide), or consumable items
• Damage due to incorrect installation, modification or unauthorised service
work
• The manufacturer disclaims any liability for incidental, or consequential
damages