Sears Ty Pennington Style D71 M1228 User manual

PARKSIDE RESIN WICKER SWING
Product Code: D71 M1228
KSN: 0-08803261-0
UPC Code: 095457158008
Date of Purchase: _____/ _____/ _____

2
Table of Contents
Table of Contents................................
Safety Information.............................. 3
Set Up Your Furniture Properly.....
Examine your furniture....................
Warranty.................................................
What is Covered...............................
What is Not Covered........................
Care and Maintenance................ .......
Pre-Assembly............. ................. ...........
Planning Assembly...........................
Hardware Included...........................
Observe weight Limits.....................
Package Contents............................
Assembly Instructions
Customer Service..................................
Thank you for your purchase
Thank you for your purchase!
We are pleased that you have chosen Sears for your outdoor furniture
purchase. We hope that you enjoy the unmatched quality, comfort, and
style of your new patio set. Every piece is meticulously considered all the
way down to the smallest details, exclusively for you, by our world class
design team. We know you have a choice when it comes to your patio
furniture needs, so from our team to yours, thank you for letting us be a part
of your outdoors.
3
3
4
4
4
5
5
5
5
6
7-17
18
... ...................
2
3

Warranty
1 YEAR WARRANTY FOR FRAME, RESIN WEAVE AND CUSHIONS
WHAT IS COVERED
We warrant to the original purchaser for one year, from the date of
purchase, that the frame, resin weave and cushions will be free from
manufacturing defects. This warranty also covers peeling, crackling,
blistering, discoloration, or fading for this one year period.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging
charges to and from our service center. This warranty does not cover
commercial use, acts of nature, fire, freezing, and abusive use.
Discoloration or fading of the finish or fabrics as a result of chemicals or
spills is not covered. Glass tabletop breakage and corrosion or rusting of
hardware are not covered. In addition, purchased parts are not covered
under this warranty. Proof of purchase (dated register receipt) is
required for warranty claims. We reserve the right to make substitutions
with similar merchandise, if the model is no longer in production.
Warranty is to the original purchaser and is not transferable. As some
states do not allow exclusions or limitations on an implied warranty, the
above exclusions and limitations may not apply. This warranty gives you
to state.
WARRANTY
3
Safety InformationSafety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per
the instructions.
When placing in the desired location, ensure that all legs are resting on
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose
parts are found, they must be retightened fully before additional use.
This limited warranty is extended to the original purchaser and applies to
defects in material and workmanship of your patio furniture, provided your
furniture is maintained with care and used only for personal, residential
purposes.
Resin wicker is warranted to be free from defects in material or workmanship for
a period of one (1) year.
specific rights, but you may also have other rights which will vary from state
the same surface. You may adjust the leg levelers as needed to ensure
the item stands securely on your surface.

Care and Maintenance
Wash the frame with a mild solution of soap and water, rinse with clean
water and dry thoroughly.
Cushions may also be cleaned by hand with a mild solution of soap and
water. Rinse the cushion cover thoroughly and allow to drip dry. The
back cushion and pillow should be spot cleaned with a soft cloth. Do not
machine wash or tumble dry as cushions may shrink. Do not use bleach
or solvents on fabrics. Never use cleaners that contain acid or abrasive
materials.
Use and operation: To improve the lifespan of this furniture, cover when
not use and store in a dry place in the off season.
4
Warranty
Cushions are covered for a period of one (1) year against defects in
material or workmanship.
Frames are warranted to be free from defects in material or workmanship
for a period of one (1) year.
Exclusions: items used for commercial, contract, or other nonresidential
purposes, or items damaged due to acts of nature, vandalism,
misuse, or improper assembly is not covered. Discoloration and fading
of the finish or fabrics as a result of chemicals or spills are not covered.
Glass table top breakage and corrosion or rusting of hardware are not
covered. If within the stated warranty period, this product is found to be
defective in material or workmanship, the purchaser must contact the
manufacturer’s customer service department. The manufacturer, at
its option, will repair or replace the defectives parts. Proof of purchase
(date register receipt) is required for warranty claims. It remains the
customer’s responsibility to pay for freight and packing charges to and
from the service center. Warranty is to the original purchaser and is
nontransferable.
Any replacement of warranted items will be in the original
style and color, or a similar style and color if the original is unavailable
or has been discontinued. As some states do not allow exclusions or
limitations on an implied warranty, the above exclusions and limitations
may not apply. This warranty gives you
to state.
Care instructions: protecting furniture from the elements, when not in
use is highly recommended. Wipe frame with a lightly damp cloth and
dry completely, do not use bleach or solvents. Wash cushions with mild
solution of soap and water, rinse thoroughly. Do not machine wash.
Customer service 1-800-585-9969
specific rights, but you may also
have other rights which will vary from state

Pre-Assembly
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly.
Remove all protective caps before beginning assembly. It takes about
60 minutes for two to complete all the assembly.people
HARDWARE INCLUDED
NOTED:Hardware not shown
to actual size.
_DD_AA
CAUTION:If you overload your
furniture, injuries can occur.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Swing: 400 lbs
_EE
_BB
_FF _GG _HH _II
_KK
5
_LL
_JJ
(4mm)
WASHERS (13mm)
12
Part Description QTY.
AA
(6.35x16mm)
BOLTS
Size
(52x50x52mm)
BB
CC
DD
EE
FF
GG
HH
II
BOLTS
HEXAGONAL BOLTS
WASHERS
PLASTIC KNOB
6.35x35mm)
(
8x95mm)
(
(8.5mm)
(12mm)
16
4
30
8
4
8
2
NUTS
NUTS CAP
JJ
ALLEN WRENCH 1
(4mm)
(7mm)2
KK
SPRING HOOK
LL WRENCH 2
(2mm)
BOLTS
6.35x42mm)
(
2
_CC

6
Pre-Assembly (continued)
Package Contents
Safety Information
1. EVERY BOLT NEEDS TO BE USED WITH A WASHER.
2 .DO NOT FULLY TIGHTEN BOLTS UNTIL INDICATED IN STEP 6.
PART QUANTITY
DESCRIPTION
A
B
1
2
C2
D
E
F
G
H
I
J
K
L
M
N
1
2
2
2
2
1
2
1
1
2
2
TOP BAR
FRONT LEG
BACK LEG(R&L)
LEG CROSS BAR
LEG SUPPORT BAR
BACK HANG BAR
FRONT HANG BAR
WICKER SIDE PANEL(R&L)
SWING TOP
WICKER ARM(R&L)
WICKER BACK
WICKER SEAT
BACK CUSHION
SEAT CUSHION
A
BE
G
F
D
C-L
IH-R
J-L
K
L
M
N
F
G
E
B
C-R
H-L
J-R

7
Assembly Instructions
Attaching the swing top
1
ATTACH TWO WICKER SIDE PANEL “H” TO THE SWING TOP “I”, FASTEN WITH EIGHT
X8
_EE_BB
X8
BOLTS “BB” AND EIGHT WASHERS “EE”, TIGHTEN HALF THE WAY USING ALLEN WRENCH “KK” .
I
H
H
2
1
4
3
6
5
8
5
2
1
4
3
6
5
8
6
2
1
4
3
6
5
8
7
2
1
4
3
6
5
8
8
2
1
4
3
6
5
8
1
2
1
4
3
6
5
8
2
2
1
4
3
6
5
8
3
2
1
4
3
6
5
8
4
_EE
_BB
214
36
5
8
5214
36
5
8
6214
36
5
8
7214
36
5
8
8
214
36
5
8
1214
36
5
8
2214
36
5
8
3214
36
5
8
4
_KK
X1
I
CHECK AND MAKE ADJUSTMENT AS NEEDED. USING THE WRENCH “KK” FULLY TIGHTEN THE BOLTS.

8
Assembly Instructions
Attaching the leg and the top bar
2
PLACE THE FRONT LEG “B” AND BACK LEG “C” TOWARD THE TOP BAR ”A”,
FASTEN WITH FOUR HEXAGONAL BOLTS “DD”, EIGHT WASHERS “FF”, EIGHT NUT CAPS
“HH” AND FOUR NUTS “GG”. TIGHTEN HALF THE WAY USING TWO WRENCH ”LL”.
X4
_DD
X8
_FF
214
36
5
8
9214
36
5
8
10
214
36
5
8
9
214
36
5
8
10
HH FF GG
A
BC-L
C-R
B
_GG _HH
X4 X8
HH
FF
DD
_LL
X2

9
Assembly Instructions
Attach the leg support bar
3
ATTACH TWO LEG SUPPORT BARS “E” TO THE FRONT LEG “B” AND BACK LEG “C”(C-L & C-R),
ALLEN WRENCH “KK”.
FASTEN WITH EIGHT BOLTS “AA” AND EIGHT WASHERS “EE”. TIGHTEN HALF THE WAY USING
214
36
5
8
11
214
36
5
8
12
214
36
5
8
13
214
36
5
8
14
214
36
5
8
15
214
36
5
8
16
214
36
5
8
17
214
36
5
8
18
E
E
X8
_AA _EE
X8
_EE
_AA
11 12 13 14
15 16 17 18
C-R
C-L
B
B
_KK
X1
_DD_AA
_EE
_BB
_FF _GG _HH _II
_KK _LL
_JJ
_CC

_EE
_AA
19 20
10
Assembly Instructions
Attach the leg cross bar
4
ATTACH THE LEG CROSS BAR “D” TO THE BACK LEG “C”(C-L & C-R), FASTEN WITH FOUR BOLTS
“AA” AND FOUR WASHERS “EE”. USING THE ALLEN WRENCH “KK” FULLY TIGHTEN ALL THE BOLTS.
214
36
5
8
19
214
36
5
8
20
D
X4
_AA _EE
X4
C-L C-R
_KK
X1
_DD_AA
_EE
_BB
_FF _GG _HH _II
_KK _LL
_JJ
_CC

11
Assembly Instructions
Attach the wicker back
5
ATTACH THE WICKER BACK “K” TO THE WICKER SEAT “L”, FASTEN WITH TWO BOLTS ”CC”
AND TWO WASHERS “EE”. TIGHTEN HALF THE WAY USING ALLEN WRENCH “KK”.
_CC
_EE
214
36
5
8
21 214
36
5
8
22
214
36
5
8
21
214
36
5
8
22
L
K
L
X2
_CC _EE
X2
_KK
X1
_DD_AA
_EE
_BB
_FF _GG _HH _II
_KK _LL
_JJ
_CC

12
Assembly Instructions
Attach the wicker arm
6
ATTACH THE WICKER ARMS “J”(J-L & J-R) TO THE WICKER BACK “K” AND WICKER “L”, SEE PICTURE
26, 27 & 30. USING THE ALLEN WRENCH “KK” FULLY TIGHTEN ALL THE BOLTS.
24, 25, 28 & 29. FASTEN WITH FOUR BOLTS “BB” AND FOUR WASHERS “EE”. REPEAT FOR PICTURE 23,
_BB
_EE
214
36
5
8
23 214
36
5
8
24 214
36
5
8
25 214
36
5
8
26
214
36
5
8
27 214
36
5
8
28 214
36
5
8
29 214
36
5
8
30
214
36
5
8
23 214
36
5
8
24
214
36
5
8
25
214
36
5
8
26
214
36
5
8
27 214
36
5
8
28 214
36
5
8
29
214
36
5
8
30
L
K
J-R
J-L
X8
_BB _EE
X8 _KK
X1
L
K

13
Assembly Instructions
Assembling the spring hook and the hang bar
7
PLACE TWO FRONT HANG BARS “G” AND TWO BACK HANG BARS “F” INTO THE SPRING HOOK “JJ”.
214
36
5
8
31 214
36
5
8
32
214
36
5
8
31 214
36
5
8
32
G
F
G
F
F
G
F
G
_JJ _JJ
_JJ
_JJ
X2
_JJ
MAKE SURE
THE HOLE INWARD

Assembly Instructions
Place the hang bars to the wicker arm
8
PLACE TWO FRONT HANG BARS “G” AND TWO BACK HANG BARS “F” INTO THE WICKER ARMS
“J”(J-L & J-R).
14
214
3
6
5
8
33 214
3
6
5
8
34 214
36
5
8
35 214
36
5
8
36
214
36
5
8
33
214
36
5
8
34
214
36
5
8
35
214
36
5
8
36
F
G
G
F
J-L
J-R
F
G

Assembly Instructions
Place the spring hook to the top bar
9
PLACE THE TWO SPRING HOOKS “JJ” TO THE TOP BAR “A” SMOOTHLY.
15
214
36
5
8
37 214
36
5
8
38
214
36
5
8
37
214
36
5
8
38
A
_JJ
_JJ
_DD_AA
_EE
_BB
_FF _GG _HH _II
_KK _LL
_JJ
_CC

Assembly Instructions
Attach the swing side panel and top bar
10
ATTACH THE SWING SIDE PANEL “H” TO THE TOP BAR “A”, USING THE PLASTIC KNOB “II” TO
FIX IT AND ADJUST THE ANGLE OF SWING CANOPY CAREFULLY.
16
214
36
5
8
39 214
36
5
8
40
214
36
5
8
40
214
36
5
8
39
H
H
A
X2
_II
_II
A
_DD_AA
_EE
_BB
_FF _GG _HH _II
_KK _LL
_JJ
_CC

Assembly Instructions
Place the cushions
11
PLACE THE SEAT CUSHIONS “N” ONTO THE WICKER SEAT, AND PLACE THE BACK CUSHIONS “M”
TO THE WICKER BACK.
17
M
N
N
M
THE SWING IS READY TO USE NOW.

18
TSY Services, LLC.
HOME OFFICE: 13033 Arctic Circle, Santa Fe Springs, CA 90670
FAX: [phone]
CUSTOMER SERVICE HOT LINE: 1-800-585-9969
SERVICE HOURS: MONDAY - FRIDAY 8:30 AM - 4:30 PM (EST)
E-MAIL: [email protected]
SHINCREST PTE.,LTD.
SH IN
CRES
T
Customer Service

Made in / Hech en CHINA
For questions or comments about product:
Email: [email protected] or Call toll-free: 1-800-585-9969
Please refer to part numbers when reordering
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com