Seat ibiza User manual

BLUETOOTH SYSTEM IBIZA/IBIZA SC/IBIZA ST OWNER’S MANUAL
Inglés 6J0012006BT (02.11) (GT9)
6J0012006BT
Portada Sist Bluetooth_PQ25_Maquetación 1 10/03/11 12:54 Página 3

Table of Contents
General information . . . . . . . . . . . . . . . . 2
Important information . . . . . . . . . . . . . . 3
Introduction to the Bluetooth
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General information . . . . . . . . . . . . . . . . . . . . . . . 4
Compatibility with mobile phones . . . . . . . . . . 5
Bluetooth system components . . . . . . . . . . . . . 5
Getting started: Linking . . . . . . . . . . . . 6
Creation of user profile . . . . . . . . . . . . . . . . . . . . 6
Pairing with the mobile phone . . . . . . . . . . . . . 6
Automatic pairing . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation via controls . . . . . . . . . . . . . . . . . . . . . 8
Operation via voice control . . . . . . . . . . . . . . . . . 9
Telephone display . . . . . . . . . . . . . . . . . . . . . . . . . 12
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1Table of Contents

2General information
General information
What you should know before reading this manual
This manual contains a description of the equipment supplied with the ve-
hicle at the time of press. Some of the equipment hereunder described will
not be available until a later date, or is only available in certain markets.
Because this is a general manual, some of the equipment and functions
that are described in this manual are not included in all types or variants of
the model or model year; they may vary or be modified depending on the
technical requirements and on the market or model year; this can not be
interpreted as dishonest advertising.
The illustrations are intended as a general guide and may vary from the
equipment fitted in your vehicle in some details.
The texts shown in this manual for describing the Telephone, and the orders
for the voice control, may vary depending upon the vehicle: they should be
taken as descriptions of the function rather than the precise text.
The equipment marked with an asterisk** is fitted as standard only in cer-
tain versions, and is only supplied as optional extras for some versions, or
are only offered in certain countries.
All registered marks are indicated with ®. Although the copyright sym-
bol does not appear, it is a copyrighted mark.
The section is continued on the following page.
Marks the end of a section.
WARNING
Texts preceded by this symbol contain information on safety. They warn
you about possible dangers of accident or injury.
®


CAUTION
Texts with this symbol draw your attention to potential sources of damage
to your vehicle.
For the sake of the environment
Texts preceded by this symbol contain relevant information concerning envi-
ronmental protection.
Note
Texts preceded by this symbol contain additional information. 

3Important information
Important information
Traffic safety
Travelling on today's roads requires the driver's full attention at all times.
Only operate the Bluetooth system and its various functions when the traffic
situation really allows this.
WARNING
●Before starting the trip, you should familiarise yourself with the dif-
ferent functions of the Bluetooth system.
●High audio volume may represent a danger to you and to others.
●Adjust the volume in a way that you can distinguish surrounding
noise, for example, horns and sirens, etc.
●Bluetooth system settings should be made when the car is stopped,
or by a passenger. 

4Introduction to the Bluetooth system
Introduction to the Bluetooth system
General information
This system allows you to connect your mobile phone via
Bluetooth connection and to use the hands-free mode.
The hands-free device means that the telephone can be used inside the ve-
hicle; the driver will not have to remove their hands from the steering wheel
nor will be distracted from traffic.
Available functions include making calls in hands-free mode, access to the
mobile phone address book, access to the call list and control of the voice
recognition system.
The Bluetooth system is activated when the ignition is turned on and it is
deactivated when the key is removed from the ignition.
Before using the communication system, the mobile phone has to be con-
nected to the vehicle's Bluetooth system ⇒ page 6.
WARNING
●Please concentrate on driving. As the driver, you have the responsibil-
ity for your safety and that of others. For this reason, you should only use
the functions when the traffic situation allows so and in a manner that
allows you to maintain control of the vehicle. Otherwise, you run the risk
of causing an accident.
●The speech system must not be used in cases of emergency, since the
voice changes in stressful situations. This could result in a failed or de-
layed telephone connection. Always dial emergency numbers manually!
●Always observe applicable legislation.
●Adjust the volume so that external warning sounds (e.g. emergency
vehicles) are always audible.
Note
●The voice control system is only available in the following languages:
Spanish, Mexican Spanish, German, English, French, Canadian French, Ital-
ian, Portuguese, Czech, Russian and Dutch. To change the language you
must go to a Technical Service. 

5Introduction to the Bluetooth system
Compatibility with mobile phones
New models of mobile phones are being released constantly by the differ-
ent brands, with different operating systems and different ways of operat-
ing. For this reason there are some mobile phones that do not perform
some of the functions correctly or are even totally incompatible. At SEAT we
would like to help you choose a mobile phone, so we have published the
results of compatibility tests performed for different mobile phones. Visit
the SEAT website or ask at your dealer.
Depending on your mobile phone model, certain functions may not be avail-
able or it may be necessary to change the configuration. Familiarise yourself
with your phone and read the instruction manual to learn the possibilities it
offers.
Even when the mobile phone appears as compatible in our list, we have no-
ticed that occasionally it is possible that the phone presents an abnormal
behaviour with the system due to software errors. In this case we recom-
mend updating your mobile phone's software. Mobile phone manufacturers
usually have updates available on their websites, which can improve the
operation of your phone. 
Bluetooth system components
Fig. 1 Display and handling components of the Bluetooth system.
⇒ fig. 1 Necessary components See
1Multi-function control ⇒ page 8
2Radio ⇒ page 8 and
⇒ page 9 

6Getting started: Linking
Getting started: Linking
Creation of user profile
Each telephone must be paired to the Bluetooth system be-
fore using it for the first time.
When pairing a mobile phone for the first time, you will be asked to create a
user profile. A user profile is necessary for you to connect the mobile phone
to the SEAT system. Once the user profile has been created, your telephone
can be connected automatically or manually . It is not necessary to repeat
the initial connection process each time.
A maximum of four user profiles can be created. If you try to create a fifth
profile, the profile which has been inactive for the most time will automati-
cally be deleted.
The pairing process can take several minutes depending on the size of the
phone book.
The procedure for pairing your mobile phone to the SEAT system for the first
time is described below. 
Pairing with the mobile phone
Follow the steps below to connect the mobile phone to the vehi-
cle's Bluetooth by searching for devices from the mobile phone:
–Activate the Bluetooth function on the mobile phone. Refer to
the mobile phone manual for instructions.
–Turn on the ignition with the key. The vehicle system will be visi-
ble to the mobile phone via Bluetooth for 3 minutes.
–Search for Bluetooth devices using the mobile phone. Refer to
the mobile phone manual for instructions.
–Select the device SEAT_BT from the list of search results on the
mobile phone.
–Next, accept the connection instructions on the mobile phone.
–When asked to do so, enter the PIN number 1234 and confirm.
(PIN 1234, factory-set, can be modified).
–The contacts from the mobile phone's memory and/or SIM
card1) are transferred to the vehicle system.
–The pairing is complete.
Note
The visibility of the Bluetooth system in the vehicle is activated for 3 mi-
nutes when the ignition is turned on with the key. After 3 minutes, if you
need to activate the visibility again, you can do so with the voice control
⇒ page 9 or turning the ignition off and on again.
Note
If for any reason you take more than 3 minutes to perform these steps or
more than 30 seconds to enter the PIN, you will have to start the process
over again. 
1) Depending on the phone model and configuration.

7Getting started: Linking
Automatic pairing
When the telephone has been paired and the corresponding user profile
created, your telephone will automatically pair with the SEAT telephone sys-
tem under the following conditions:
●The mobile phone is switched on with the Bluetooth function activated
and the visibility activated. The mobile phone must be close to the vehicle.
●The vehicle's system has the Bluetooth visibility activated (it will remain
active during 3 minutes after turning on the ignition).
●As long as the automatic connection has been accepted in the ques-
tions during the first pairing. 

8Operation
Operation
Operation via controls
Multi-function control
The mobile phone system can be controlled from the multi-
function control or by using the voice control system.
Fig. 2 Multi-function
control buttons.
Fig. 3 Radio buttons.
Controls on the multifunction control
Button Function
Push to talk buttonor PTT button.
Short press: start or cancel voice control, interrupt current mes-
sage in order to talk right away.
 /

Short press: adjust volume of telephone function.
Short press: Accept, Start, End a call.
Long press: Reject a call. 

9Operation
Radio controls
Button
⇒ fig. 3
Function during an incoming
call which has not yet been an-
swered
Function during an active call
AAnswer the call Set the microphone to mute
BReject the call End call
CTurn: Adjust volume
Press: Mute audio output (speakers) 
Operation via voice control
Introduction
The voice control system can be activated with the “Push to
talk” or “PTT” button .
Thanks to the voice control you can use many telephone functions without
having to take your eyes off the road or your hands off the steering wheel.
Dialogue is the time during which the voice control system transmits mes-
sages and can receive spoken orders (commands).
If a call is received, then the dialogue is immediately interrupted.
You can use the HELP in any part of the menu. If you have any doubts or
cannot decide the Command to use, the system will provide you with the
available options.
You can CANCEL in any part of the menu. 
Basic functions available with the voice controls
Volume adjustment
You can change the sound volume at any time with the radio button or with
the buttons on the multi-function control.
Voice control connection (Dialogue)
You can start the dialogue at any time by briefly pressing the PTT button 
on the multi-function control.
If the system does not recognise your command, there is a first help option
which allows a new input. After a second failed try the system repeats the
second part of the help. After a third failed try, the answer “Process inter-
rupted” is displayed and the dialogue ends.
Disconnection of the voice control (Dialogue)
You can end the dialogue at any time by briefly pressing the PTT button 
on the multi-function control. If the system is waiting for a command, you
can end the dialogue with the “CANCEL” command.
Interruption of the current message
By pressing the PTT button  during the message, only the current mes-
sage is ended and it is possible to give another command. 
Correct use of the voice control
Note the following to ensure that you are properly understood:
●Speak in a normal tone and without pauses or exaggerated pronuncia-
tion.
●Avoid poor articulation of words.
●Keep the doors, windows and sun roof closed if possible to avoid back-
ground noises that might affect the system. 

10 Operation
●Keep the air vents directed away from the microphone (located on the
interior light).
●At high speeds, you might need to speak louder to drown out back-
ground noises.
●Avoid other noises in the vehicle during a dialogue (e.g. other passen-
gers speaking in the vehicle).
●Avoid speaking when the system is saying a cue.
●The hands-free microphone is directed towards the driver, therefore, on-
ly the driver should try to operate the system.
●To make a call when there is heavy background noise we recommend us-
ing the speech controlled telephone book instead of speaking individual
digits. This will help avoid mistakes when specifying telephone numbers. 
Voice control orders (commands)
The voice control can be used in the following languages:
Spanish, Mexican Spanish, German, English, US English, French,
Canadian French, Italian, Portuguese, Czech, Russian and Dutch.
Basic commands valid in any part of the menu
HELP After this command the system repeats all the possible com-
mands
CANCEL The dialogue ends
Other commands for operating the Bluetooth system
Command Action
CALL
[NAME]
This command is used to call a contact in the phone book.
PHONE
BOOK
After this command you can play all the contacts, select one
to call or record/delete the name by voice.
CALL LIST The Received calls, Missed calls or Dialled numbers list is
read.
DIAL NUM-
BER
After this command you can enter a phone number to call
the desired person ⇒ page 10
REDIAL After this command the system dials the last number.
OTHER OP-
TIONS
PHONE BOOK
READ PHONE
BOOK
CALL contact
RECORD contact name
by voicea)
DELETE contact name
by voice
UPDATE phone book
SETTINGS
LONG DIALOGUE / SHORT DIALOGUE
BLUETOOTH CHANGE PIN
Activate VISIBILITY
RESTORE FACTORY DEFAULTSb)
CALL HISTORY
RECEIVED calls
MISSED calls
DIALLED numbers
a) Because of the different pronunciations of each language, some of the names may not be
read as you expected. Because of this you can record up to 15 contacts with your own
voice.
b) It is recommended to restore the factory defaults if you are going to sell the vehicle, so that
your personal details, such as PIN, contacts, calls, etc. are deleted, and the settings are
restored.
DIAL NUMBER command
After saying the DIAL NUMBER command the system asks you to enter a tel-
ephone number. The telephone number can be entered as a sequence of
digits pronounced coherently (complete number), in series of digits (sepa-
rated by a brief pause) or in digits pronounced separately. After each series
of digits (separated by a brief pause) the digits recognised until then are re-
peated. 

11Operation
Digits 0 - 9 and symbols +, , # are allowed. The system does not recog-
nise coherent numeric combinations such as twenty-three, only individual
digits (two, three). 
Additional information
Voice control is available in different languages:
Spanish, Mexican Spanish, German, English, US English, French, Canadian
French, Italian, Portuguese, Czech, Russian and Dutch.
The language is configured at the dealer and can only be changed at a SEAT
Official Service.
The languages available in each vehicle depend on the destination of the
vehicle.
Dialogue options
The voice control system includes the options, short dialogue and long dia-
logue. The default setting is the long dialogue. The short dialogue is recom-
mended when you are familiar with the orders and the structure of the voice
control menu. The long dialogue offers more tips and information about the
voice control procedure. It can be changed via voice control ⇒ page 10. 

12 Operation
Telephone display
Radio
Fig. 4 Incoming call on the radio screen.
Fig. 5 Multi-function
control
The image ⇒ fig. 4 shows an incoming call. We can decide if we want to ac-
cept the call with the button A or reject the call with the button B on the
radio. The call can also be accepted or rejected with the button  ⇒ fig. 5
on the multi-function control. 
Making, accepting, rejecting, ending a call
Function Via voice control ⇒ page 10
Dialling a contact from the
address book
Follow the instructions given in the main
menu.
Calling a number Follow the instructions given in the Dial
number menu.
Function Multi-function control
⇒ fig. 5
Radio ⇒ fig. 4
Accepting a call Press button Press button A
Rejecting a call Press button  for more
than 2 seconds.
Press button B
Ending a call Press button Press button C

Index
A
Adjust the volume . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic pairing . . . . . . . . . . . . . . . . . . . . . . . . . 7
B
Bluetooth
Automatic pairing . . . . . . . . . . . . . . . . . . . . . . 7
Create user profile . . . . . . . . . . . . . . . . . . . . . 6
General information . . . . . . . . . . . . . . . . . . . . 4
Pairing the mobile phone . . . . . . . . . . . . . . . 6
Visibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
C
Call
Accept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Accepting . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjust volume . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Reject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rejecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Call list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Compatibility with mobile phones . . . . . . . . . . . 5
Creation of user profile . . . . . . . . . . . . . . . . . . . . 6
D
Dialogue
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Push To Talk . . . . . . . . . . . . . . . . . . . . . . . . . . 9
F
Factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . 10
Functions during a call . . . . . . . . . . . . . . . . . . . . . 9
G
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
I
Important information . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
L
Languages . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
M
Multi-function control . . . . . . . . . . . . . . . . . . . 5, 8
O
Operation
Via controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Via voice control . . . . . . . . . . . . . . . . . . . . . . . 9
P
Pairing the mobile phone . . . . . . . . . . . . . . . . . . 6
Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Push To Talk (PTT) . . . . . . . . . . . . . . . . . . . . . . . 8, 9
End dialogue . . . . . . . . . . . . . . . . . . . . . . . . . 9
Interrupt dialogue . . . . . . . . . . . . . . . . . . . . . 9
R
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
S
Settings
Call history . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Phone book . . . . . . . . . . . . . . . . . . . . . . . . . 10
System components . . . . . . . . . . . . . . . . . . . . . . 5
T
Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
13Index

V
Voice control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Basic functions . . . . . . . . . . . . . . . . . . . . . . . . 9
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Correct use . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Voice control orders . . . . . . . . . . . . . . . . . . . . . . 10
14 Index

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error
or omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.04.11
Portada ALTEA_interior_maquetación 03/03/11 13:49 Página 3

BLUETOOTH SYSTEM IBIZA/IBIZA SC/IBIZA ST OWNER’S MANUAL
Inglés 6J0012006BT (02.11) (GT9)
6J0012006BT
Portada Sist Bluetooth_PQ25_Maquetación 1 10/03/11 12:54 Página 3