Sedna SE-WL-USB-11G User manual

SEDNASE-WL-USB-11G USERMANUAL
SEDNA USB Wireless LANAdapter User Manual
1Install the driver
a Insert the installation CD into your CD-ROM driver, Double
click the icon to start setup
b Click Yes to go on
cIt’s recommended to choice Optimize for performance mode
click next to go on
1
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
d
eClick Finish to end the setup
2 Plug in your usb wireless LAN adapter, it will be recognized
and auto installed. Just confirmed it like below:
3 Make infrastructure connection
¾Double click the icon in red circle
2
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
¾You will see:
¾You can click the button Rescan to find which AP is in range,
they will show on the window, choice one you want to
connect, and click the button connect, and click ok to finish
the connection operation.
¾An infrastructure connection is accomplished.
¾Note, please choose correct channel setting up to your law,
for example, ch13 is permitted in your country, and you set
your router at ch13, while you choose ch1-ch11 (default
setting), you will never find the AP, and you will have to
choose ch1-ch13 setting in Advanced page as below
3
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
4 Some help information in Rlink Wireless Utility
zHow to find out your IP address:
zHow to find out which a WIFI environment you are inside
4
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
5 Make Ad-Hoc mode connection
z5.1 Make an Ad-Hoc SSID
¾Click Add
5
¾Choose Ad-hoc
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
¾Name your SSID and choose which channel you want to
take for the link
¾Activate the link
z5.2 Setup static IP address for the Ad-Hoc link
¾At its property page, double click item Internet
Protocol (TCP/IP)
6
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
You will get
Fill the IP address blank, example as below:
7
SEDNA

SEDNASE-WL-USB-11G USERMANUAL
¾Click ok to finish the setup
z5.3 Ad-Hoc setup for one point accomplished
z5.4 Setup another Ad-Hoc point as step A,B,C,D.
z5.5 Ad-Hoc mode link accomplished. And you can visit
each other.
Note: To make an Ad-Hoc mode link, Do remember to
choice the same channel, its static IP address should be in
the same netsub, and the SSID should be the same too
6 Why it’s recommended to choose optimize for performance
mode while driver installation .
Choose this item, you will get turbo function that is powered by
Ralink Technology. With this technology, your will get higher TX
throughput.
8
SEDNA