seenda BT2809 Configuration guide

Bluetooth Speaker
Model No.: BT2809
FCC ID: ZV9-BT2809
User Manuel
1.Product Parameters
Receive distance:up to 10M Impedance:4 OHM(Ω)
Input:DC5V-300mA Music Mode:Bluetooth,AUX
Power :4W Lithium battery:3.7V/300mAh
Audio adapter:3.5mm Stand by time:Up to 200 Hours
Time of play music:Up to 5 hours product size:70.6*70.6*38mm
Material:ABS+fabrics Product:97G
2.Product Features
1) BT2809 uses Bluetooth technology to connect with other Bluetooth devices such as smart
phones tablet PC,laptop to play.
2) BT2809 supports AUX in,it applies to every electronics which with a 3.5mm audio cable(such
as iPhone ,iPad,tablet PC,PSP,electronic dictionary,electronic reading machine)to play.

3) BT2809 supports Hands free for calling.
4) BT2809 Built-in Lithium battery.It can music playback up to 5 hours
3.Instruction
1.
Power Button (Mode Button)
2.AUX port
3.
Charging port
4.Previous track/Volume+control
5.Microphone
6.Pause
7.Next track/Volume-control
Bluetooth function and AUX function
1.When you use Bluetooth function,open your mobile phone “Bluetooth”and find the
name”BT2809” to connect.
2.When you want to change to AUX,please turn off your mobile phone Bluetooth,use 3.5mm
cable to connect your mobile phone and speaker.

Previous track/Volume+control
1.Previous track:Short press .Volume+control:long press
2.Next track:Short press.Volume-control:long press
4.Operation
1.Bluetooth Mode Operation:
1)After turn on BT2809 button and its Bluetooth will enter pairing mode,blue light flashes mean
Bluetooth waiting for your connect.
2)Open your device’s Bluetooth.Search for the Bluetooth speaker code BT2809 and click it to pair.
After the blue light is stop to flash mean pairing was successful.
2.AUX in mode operation:
1)Insert a 3.5MM stereo plug into BT2809 after power BT2809
2)BT2809 will switch to AUX in mode automatically.
3)Insert the other Plug end into the output audio interface of electronic device,such as mobile
phone,computer,MP3,etc.and then turn on the music player to enjoy music.
3.Hands free communication
BT2809 allow the user to hold a telephone conversation without having to hold the phone in
hands once it is paired to the product.In Bluetooth mode,the voice prompt will inform of an
incoming call.
4.Charging Instructions
1)When BT2809 battery is low,voice of “di” will inform you to charge.BT2809 will shut down
automatically later if not charging
2)The red light is permanently on while charging,and turns off while charging fully.
5.Package Includes
1)Bluetooth Speaker BT2809*1PCS
2)3.5mm audio cable*1PCS;USB charging cable*1PCS
3)User manual*1PCS

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.