SEEWIS MyPile User manual

欢迎使用MyPile
请打开包装后先把无线底座安装在合适的位置。
然后将您的IPAD电脑安装在无线充电保护壳内。
充电接口
透声孔
音量调节
电源按键
耳麦孔
功能支架
产品应用场景
智能家居
家庭影院
高端酒店
安防监控
可视对讲
背景音乐
实现IPAD默认只打开一个APP应用设置
在某种智能控制场景下能更好的使用本产品，建议把
IPAD设置为只能打开控制软件APP其它应用软件不允
许访问
您可访问 了解设置方法www.mypile.com
超窄边框设计 磁力吸附稳定可靠
N40超强磁力吸附，可吸附重量2kg物体
壁挂安装，可随时摘取方便操作使用
隐形保护，极致边框的设计，厚度仅为0.25mm
产品与墙面完全贴合
平面安装融为一体几乎看不出有间隙
更多详情请访问www.mypile.com
标准86底盒充电底座
无线充电底座按国标86底盒设计，无需另外定制安装底盒
多功能支撑架
配备可收缩桌面支撑架,适用于任何环境下的使用 灵活可拆的充电接口
专利设计为产品特制的充电接口可以在不把IPAD从保护壳内
取出的情况下插入其它数据线以便于传输资料非常人性化设计
全年可待机工作充电不发烫
长达一年的QI研发设计使之效率达到74%充电电流稳定输出
在工作时IPAD可长期安放在充电底座上有自动识别电量功能
可有效保护电池使用寿命产品可365天全年工作不受任何影响
你要大胆的想
真正的干
在探索的路上不断的投入
不断的努力不断的突破
就一定会有收获
因为我们的用户群和我们自己都是有品质的
喜欢用世界上最好的东西
哪怕它只好1%
我们愿意多投100%
MyPile
如何正确的使用产品
重要注意事项
· 在使用本设备前，请先阅读所有安全信息以确保正确和安全的使用。
· 请使用本制造商认可且与此型号设备配套的配件。
· 本设备的使用温度范围-10°C~70°C,当环境温度变化过大时有可能会影起设备故障
· 切勿自行维修产品。若产品或者其它部件不能正常工作，应及时咨询或者时联系厂家售后服务。
· 切勿扔放、敲打或强烈震动产品，导致内部电路板损坏。
· 当产品充电时间过长后，例如平板电脑电量太低所需要充电的时间就会延长，此时产品可能开始轻微发烫
这是正常现象，并不是产品本身的故障，请勿担心。
· 请勿在产品上放置重物或者用力挤压产品，以免造成破裂。
· Ipad的电量如低到不足以开机，在这样的情况下是无法对其充电的。请至少保持一定的电量维持能正常开机。
配件使用注意事项
· 请您将所有配件放置在儿童接触不到的地方，以免发生危险。
· 由于产品不具备防水性能，请保存所有配件干燥。
· 切断产品电源时，应正确拔出插头，切入拉扯电源线。
SAR
· 产品电磁辐射比吸收率（SAR）最大值为≤2.0W/Kg
符合国家标准BG21288-2007的要求。
· 自购买之日起一年内，如果产品出现国家三包规定中所列非人为性能故障，并经过售后维修检测确定，检测确定产品出现
符合国家三包规定的非人为性能故障，您可以免费维修，上述故障经两次修理，扔不能正常使用的，用户可凭三包凭证中
维修者提供的维修记录，由销售商为您提供退货服务。
！
产品售后服务承诺
· 本承诺仅适用于在中华人民共和国境内（港、澳、台地区除外），如国家法律另有规定
的，按照国家的相应法律执行。
· 产品跟换过后的部件归公司所以。
特殊物质声明
⊙:表示该有毒有害物质在该部件所有均物质材料中的含量在GB/T26572标准规定
的限量要求以下。
×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出GB/T26572标
准规定的限量要求。
（本产品符合RoHS环保要求:目前国际上尚无成熟技术可以替代或减少电子陶
瓷、光学玻璃、钢及铜合金内的铅含量。）
电子信息产品有毒有害物质申明
有毒有害物质或元素
部件
名称
PCB及组件
外壳
配件
铅
(pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr6+)
多溴
联苯
(PBB)
多溴
二苯醚
(PBDE)
× ⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
产品安装步骤
86底盒 充电底座 背胶贴片
功能支架
保护外壳
①将无线充电底座安装在86底盒内，接入220V~电源 ②安装好无线底座后把贴片粘贴在无线底座表面
③将IPAD电脑安装在保护壳内插上充电接头 ④将安装好IPAD电脑的保护壳吸附在无线充电底座上开始充电
常见故障与使用注意事项
故障现象 故障原因 解决方法
保护壳与充电底座
接触时无"嘀"的声音
IPAD电脑提示
“不再充电”
吸附后IPAD电脑无
充电反应
MyPile产品说明书
QI壁挂磁吸无线充电器
型号:HDL-Z2917
All rights reservd by TianHaoHuanYu lnc
电源线未接
或者未插好
接触瞬间
未检测到
检测电源，重新拔插一次
拿下保护壳重新放一次
电源未接或者
充电插头未插 检测电源与充电插头

Welcome to MyPile
Please open the package and install the wireless base in the appropriate position.
Then install your IPAD computer in the wireless charging protection shell.
charging interface
hole
volume
power button
MIC
Function stents
Product application scenario
Smart home
Home theater
High-end hotels
Security monitoring
Visual intercom
background music
IPAD default to open only one APP application settings
In some intelligent control scenarios, it is recommended to set
the IPAD to only open the fixed APP, other applications do not
allow access.
You can find out how to set it up at www.mypile.com
Ultra narrow bezel design. Magnetic adsorption is stable and reliable
N40 Super magnetic adsorption, adsorption weight 2kg Wall-
mounted objects can be removed at any time for easy operation
Invisible protection, extreme border design,
thickness of only 0.25mm.
Products and walls completely fit
Flat installation almost can not see a gap
For more details, visit www.mypile.com.
Standard 86 bottom box charging base
Wireless charging base according to national standard 86 bottom
box design, no need to customize the installation of the bottom box
Multi-function support frame
With retractable desktop support, suitable for any environment Flexible detachable charging interface
Patented product-specific charging interface allows the IPAD to
be inserted into other data cables without removing the IPAD
from the housing for easy data transfer. Very friendly design.
Stand-by throughout the year, charging is not hot.
Up to a year of QI design, to achieve 74% efficiency, stable current
output, IPAD can work long hours on the charging base, automatic
identification of battery power can effectively protect the battery
life, the product can work 365 days, not Affected by any.
How to use the product correctly
Important note
· Before using this equipment, read all safety information to ensure proper and safe use.
· Please use the accessories approved by this manufacturer and matched with this type of equipment.
· The operating temperature range of the device -10C ~ 70C, when the ambient temperature changes is too large,
may cause equipment failure
· Do not repair the product yourself. If the product or other components can not work properly, should consult or contact
the factory after-sales service.
· Do not throw, knock or violently shake the product, resulting in damage to the internal circuit board.
· When the product is charging for an extended period of time, for example, if the tablet's power is too low, the charging
time will be extended and the product may start to run slightly. This is a normal phenomenon, not the product itself, do not worry.
· Do not place heavy objects on the product or squeeze the product hard to avoid rupture.
· Ipad's power is too low can not boot, in such circumstances is unable to charge it. Please maintain at least a certain amount of
power to maintain normal boot.
Accessories use cautions
· Please place all accessories out of the reach of children to avoid danger.
· As the product does not have waterproof performance, please save all the accessories dry.
· Cut off the product power, the plug should be the correct pull, do not pull the power cord.
SAR
· Product electromagnetic radiation specific absorption rate (SAR) the maximum value of 2.0W / Kg
· Within one year from the date of purchase, if the products listed in the national 3 packets of
regulations for the performance fault, testing and after-sales maintenance, testing products
accord with the national 3 packets of regulations for the performance problems, you can free
maintenance, the fault the repaired twice, and throw cannot normal use, the user can by 3 pac
kets of prooves WeiXiuZhe provide maintenance records, by the vendors provide return service
for you.
！
Product after-sales service commitment
· This commitment is applicable to the territory of the People's Republic of China (except Hong Kong,
Macao and Taiwan), as otherwise provided by national laws, in accordance with the relevant laws of the state.
The product and the replacement parts belong to the company.·
Special substance declaration
⊙:Indicates that the content of the toxic and hazardous substances in all the material and
materials of the part is below the limit requirement of GB / T26572.
×:Indicates that the content of the toxic and hazardous substance in at least one homogeneous
material of the part exceeds the limit requirement of GB / T26572.
（This product complies with RoHS environmental requirements: Currently there is no mature
technology in the world can replace or reduce the lead content of electronic ceramics, optical
glass, steel and copper alloy.）
Electronic information products toxic and hazardous substances affirmed
Poisonous or harmful substances or elements
Part
Name
PCB and
components
shell
Accessories
lead
(pb)
HG
(Hg)
cadmium
(Cd)
Hexavalent
chromium
(Cr6+)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
× ⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
⊙
Product installation steps
86 bottom box Charging base Adhesive patch
Functional bracket
Protect the shell
①The wireless charging base is installed in the
bottom box 86, access 220V ~ power
②After the wireless base is installed, the patch is
pasted on the surface of the wireless base
③IPAD computer installed in the protective shell,
plug in the charging connector
④The installed IPAD computer, adsorption in
the wireless charging base, start charging
Common faults and use considerations.
Symptoms cause of issue Solution
There is no "beep" sound when
the case is in contact with the
charging stand
IPAD computer tips
"no longer charge"
IPAD computer after
adsorption no
"charge reaction”
MyPile Product Manual
QI Wall mounted magnetic wireless charger
model:HDL-Z2917
All rights reservd by TianHaoHuanYu lnc
The power cord is not
connected or not
plugged in
Contact instant
is not detected
Test the power, plug again
Remove the protective
case and contact again
Power is not connected
or charging plug is not
plugged
Test power and
charging plug