SEH ThinPrint TPR-11 User manual

Quick Installation Guide 1
Monday - Thursday
Friday
8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
℡[phone]
@[email protected]
ThinPrint®Reader
TPR-11
Quick Installation Guide
Overview [en]
This Quick Installation Guide provides
a description of the installation of the
TPR-11. It contains the following
information:
General Information
Safety Regulations
Hardware Installation
Software Installation
Getting Started
Configuring the TPR
Please note the table of contents on
page 3. Should you have any further
questions, please contact our support
hotline.
Überblick [de]
Dieser Quick Installation Guide
beinhaltet eine Beschreibung der
Installation des TPR-11. Sie erhalten
die folgenden Informationen:
Allgemeine Information
Sicherheitsvorschriften
Hardware-Installation
Software-Installation
Erste Schritte
TPR konfigurieren
Beachten Sie das Inhaltsverzeichnis
auf Seite 17. Falls Sie noch Fragen
haben, kontaktieren Sie unsere
Support- Hotline.

2 Quick Installation Guide
Date of Manufacture
The serial number includes the date of manufacture.
The serial number can be found on the type plate.

Quick Installation Guide [en] 3
2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Getting Started: InterCon-NetTool. . . . . . . . . . . . . . . . 11
Starting the InterCon-NetTool. . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Assigning an IP Address to the ThinPrint®Reader . . . . . . . . .12
2 Configuring the ThinPrint®Reader . . . . . . . . . . . . . . . . 14
Table of Contents

4 [en] Quick Installation Guide
General Information
Purpose
The ThinPrint®Reader 'TPR-11' is an authentication hardware that allows you to
use network printers as Personal Printing printers independent of printer make
and model. This is done by transparently integrating the TPR-11 into the existing
infrastructure. Authentication for the fetching of print jobs occurs directly at the
printer by using a RFID-based smart card.
The administration of the TPR-11 is done via the 'TPR Control Center'.
Scope of Supply
Please check the package content before getting started:
Make sure to have an additional RJ-45 network cable (STP Cat. 5) available. (Not
included in delivery.)
TPR-11 ThinPrint®Reader
Quick
Installation
Guide
The Quick Installation Guide provides a brief
description of the installation of the TPR-11.
(This document)
Power pack External power pack
Smart card RFID card

Quick Installation Guide [en] 5
Technical Data
* The shield connection of the RJ-45 network connector is connected to the shield of the device port.
This connection must be taken into account when arranging your network cabling. For more
information, please consult your retailer.
Properties Values
Printer port logical:
physical: - IEEE 802.3
- RJ-45 (STP Cat. 5)
Network connection logical:
physical: - IEEE 802.3
- RJ-45 (STP Cat. 5)
Device connection - 1 × USB 2.0 Hi-SpeedS
Smart card reader
Supported transponders: - 1 × contactless multi-protocol RFID smart card reader - 125 kHz/134.2 kHz:
AWID, Cardax, CASI-RUSCO, EM4100, EM4102,
EM4105, EM4200 FDX-B, G-Prox II, HITAG 1/2/S,
Honeywell NexWatch, IDTECK, Miro, Pyramid, Q5, TIRIS
(HDX), T55x7,TITAN, UNIQUE, ZOODIAC
1) Activity LED (green)
2) Network status LED (green/orange/
red)
3) RFID contact area
4) Smart card reader status LED
(green/red)
5) Server communication LED (green/
red)
6) Print status LED (green)
7) Printer port (RJ-45) for 1000BaseT,
100BaseTX and 10BaseT *
8) Network connector (RJ-45) for
1000BaseT, 100BaseTX and
10BaseT *
9) USB port for the saving of
parameters, etc.
10) Status/reset button
11) Connector for the included power
pack
Rear view
Front view

6 [en] Quick Installation Guide
LED Display
The LEDs of the TPR-11 give you information about its status.
- ISO/IEC 14443 type A (13.56 MHz):
Legic advant, MIFARE Classic 1K/Classic 4K/Classic Mini/
DESFire EV1/Plus S/Plus X/Pro X/SmartMX/Ultralight/
Ultralight C, PayPass, SLE 44R35/66Rxx (my-d move)
- ISO/IEC 14443 type B (13.56 MHz):
Calypso, CEPAS, HID iCLASS, Moneo, picopass, SRI4K,
SRI512, SRIX4K, SRT512
- ISO/IEC 15693 (13.56 MHz):
EM4x33, EM4x35, HID iCLASS, I·CODE SLI, Legic advant,
M24LR16, M24LR64, picopass, SRF55Vxx (my-d vicinity),
Tag-it
- On request: Cotag, HID Prox, Indala, ioProx, LEGIC prime
Current input - 750 mA @ 5 VDC plus USB port: 500 mA
Operating environment - Ambient temperature: 5–40 °C
- Relative humidity: 20–80%
Dimensions - Width: 140 mm
- Height: 32 mm
- Depth: 99 mm
- Weight: 150 g
LED Action Color Description
Activity blinks at
irregular
intervals
flashing
green
grün
Indicates the exchange of network data packets.
The device is in the BIOS mode.
Network status permanently on
permanently on
permanently on
green
orange
red
There is a connection on both network
connectors.
There is no connection on the network
connector 1 or 2.
There is no connection on the network
connectors.
Properties Values

Quick Installation Guide [en] 7
Smart card
reader status permanently off
permanently on
lightinguponce
(1 s)
lightinguponce
(1 s)
-
green
green
red
An error occurred on the smart card reader.
The smart card reader is ready to operate.
A card is recognized on the smart card reader.
NOTE: In addition, you will hear a short beep.
A card is not recognized on the smart card
reader.
NOTE: In addition, you will hear a long beep.
Server
communication permanently off
flashing
lighting up once
lighting up once
-
green
green
red
There is no connection to the Personal Printing
server.
Data is exchanged with the Personal Printing
server.
A print job is triggered.
NOTE: In addition, a short beep is issued for a
single print job; two short beeps are issued
when there are additional print jobs available.
An error occurred during the server
communication process. Details about the error
are shown in the TPR Control Center (Ö14).
NOTE: In addition, you will hear a long beep.
Print status permanently off
permanentlyon
flashing
-
green
green
A printer has not been configured or recognized
or the status and the messages of the printer will
not be queried.
A printer has been configured and is recognized.
The status and the messages of the printer will
be queried.
Indicates the receipt of ThinPrint® print data.
LED Action Color Description

8 [en] Quick Installation Guide
Safety Regulations
TPR-11 are network devices for use in office environments. They are used as
authentication hardware for Personal Printing printers in TCP/IP networks.
Before starting the initial setup procedure and during the operation of the
TPR-11, please note the following safety regulations. Their purpose is to protect
yourself and others from personal injuries, and avoid damage to the equipment.
Read the documentation and make sure that your system meets the
requirements listed therein.
Avoid contact with humidity or liquids.
The device must only be connected and operated if it is in perfect condition.
Make sure that no-one steps on or stumbles over the cables.
If the supplied power cord cannot be used in your country, acquire an
appropriate power cord that suits national provisions. For more information,
please consult your retailer.
Do not connect a telephone cable to the RJ-45 connector. The RJ-45
connector may only be connected to SELV voltages. For the connection to the
RJ-45 connector only STP cabling (category 5 or better) may be used. The
shielding must fit flushly to the connector.
Do not open the housing. Do not put objects on top of the housing. The device
must be placed on a solid surface with no vibration.
The device must only be operated using the power pack included in the
package.
Only use a certified USB cable (< 3 m) listed at www.usb.org.

Quick Installation Guide [en] 9
Hardware Installation
The TPR-11 is placed transparently between the printer and the network.
before
after
Proceed as follows:
1. Remove the printer network cable (RJ-45) from your switch.
2. Connect the removed printer network cable (RJ-45) to the
network connector marked as 2 Printer on the back of the
TPR-11.
3. Connect the switch to the network connector marked as
1 Network on the back of the TPR-11 using a further
network cable (RJ-45).
4. Connect the power cord to the TPR-11.

10 [en] Quick Installation Guide
Software Installation
The 'InterCon-NetTool' has been developed by SEH Computertechnik GmbH for
the administration of SEH network devices. By means of this tool you can assign
a suitable IP address to the TPR-11, as described below.
In order to use the InterCon-NetTool, the program must be installed on a
computer. Different installation files are available, depending on the operating
system.
First, you have to download the installation file for the InterCon-NetTool from
the homepage of the SEH Computertechnik GmbH:
http://www.seh-technology.com/products/thinprintreader/products/
tpr-11-downloads.html
Scan this QR code using your smart phone to get direct access to the homepage.
Proceed as follows:
1. Start the InterCon-NetTool installation file.
2. Select the desired language.
3. Follow the installation routine.
ªThe InterCon-NetTool is installed on the system.

Quick Installation Guide [en] 11
Getting Started: InterCon-NetTool
Starting the InterCon-NetTool
Start the InterCon-NetTool on your client via the Windows start menu.
(Start JAll Programs JSEH Computertechnik GmbH JInterCon-NetTool)
After the InterCon-NetTool was started, it searches the network for existing
devices and displays them in the 'device list'.
During the initial configuration, client and TPR-11 must be assigned to the same
local network segment.
Detailed information on how to use the InterCon-NetTool can
be found in the Online Help. To start the Online Help, select
Help – Online Help from the menu bar.


12 [en] Quick Installation Guide
Assigning an IP Address to the ThinPrint®Reader
Once the TPR-11 is connected to the network, it checks whether an IP address
can be obtained via the boot protocols BOOTP or DHCP. If this is not the case, the
TPR-11 assigns itself an IP address via ZeroConf from the address range
(169.254.0.0/16) which is reserved for ZeroConf.
Once the TPR-11 has automatically received an IP address via a boot protocol,
you can save a freely definable IP address in the TPR-11.
Wizards facilitate the installation and configuration of network devices. Wizards
are subprograms aimed at querying required parameter values.
The 'IP Wizard' is available for the TPR-11. You can easily enter the desired IP
address and save it in the TPR-11 using the IP Wizard.
Assign the former IP address of the printer to the TPR-11. Configure
the printer to DHCP (if you fail to do so, there will be no functionality).
Proceed as follows:
1. Start the InterCon-NetTool.
2. Mark the TPR-11 in the device list.
The TPR-11 is displayed in the device list under 'ZeroConf' with an IP address from the
address range (169.254.0.0/16) which is reserved for ZeroConf.
3. Select Installation – IP Wizard from the menu bar.
The IP Wizard is started.
4. Select Manual TCP/IP configuration.
5. Assign the former IP address, the gateway and the subnet mask of the
printer to the TPR-11.
6. Click Finish.
ªThe settings are saved.
Make sure not to block the following ports in order to guarantee smooth
communication with the TPR-11 in the network: 80 (HTTP), 443 (SSL), 161
(SNMP), and 4000 (ThinPrint).

Quick Installation Guide [en] 13

14 [en] Quick Installation Guide
Configuring the ThinPrint®Reader
The TPR-11 can be configured and monitored via the TPR Control Center. The TPR
Control Center is stored in the TPR-11 and can be launched by means of a
browser (Internet Explorer, Firefox, Safari).
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the TPR-11 as the URL.
ªThe TPR Control Center appears in the browser.
If the TPR Control Center is not displayed, check the proxy settings of your browser.
Detailed information about the configuration of the TPR-11
can be found in the Online Help of the TPR Control Center.
To start the Online Help, click the '?' icon.


Quick Installation Guide [en] 15

16 [en] Quick Installation Guide

Quick Installation Guide [de] 17
2 Allgemeine Information . . . . . . . . . . . . . . . . . . . . . . . . . 18
Verwendungszweck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Lieferumfang. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
LED-Anzeige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
2 Sicherheitsvorschriften . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2 Hardware-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2 Software-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2 Erste Schritte mit dem InterCon-NetTool. . . . . . . . . . 25
InterCon-NetTool starten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ThinPrint®Reader eine IP-Adresse zuweisen . . . . . . . . . . . . . .26
2 ThinPrint®Reader konfigurieren . . . . . . . . . . . . . . . . . . 28
Inhaltsverzeichnis

18 [de] Quick Installation Guide
Allgemeine Information
Verwendungszweck
Der ThinPrint®Reader 'TPR-11' ist eine Authentifizierungshardware, mit der
Netzwerkdrucker unabhängig von Druckerhersteller und -model als
Personal-Printing-Drucker eingesetzt werden können. Dazu wird der TPR-11
transparent in die bestehende Infrastruktur eingebunden. Die Authentifizierung
für das Abholen von Druckaufträgen erfolgt direkt am Drucker mittels einer
kontaktlosen RFID-basierten Smartcard.
Die Verwaltung des TPR-11 erfolgt über das 'TPR Control Center'.
Lieferumfang
Bitte überprüfen Sie den Packungsinhalt auf Vollständigkeit, bevor Sie die
Installation beginnen:
Halten Sie ein zusätzliches RJ-45-Netzwerkkabel (STP Cat. 5) bereit. (Nicht im
Lieferumfang enthalten.)
TPR-11 ThinPrint®Reader
Quick
Installation
Guide
Der Quick Installation Guide beinhaltet eine
kurze Beschreibung der Installation des TPR-11.
(Dieses Dokument)
Netzteil Externes Netzteil
Smartcard RFID-Karte

Quick Installation Guide [de] 19
Technische Daten
* Der Schirmanschluss des RJ-45-Netzwerk-Steckverbinders ist mit dem Schirm des
Geräteanschlusses verbunden. Diese Verbindung muss bei Ihrer Netzwerkverkabelung
berücksichtigt werden. Fragen Sie hierzu Ihren Fachhändler.
Eigenschaften Werte
Druckeranschluss Logisch:
Physisch: - IEEE 802.3
- RJ-45 (STP Cat. 5)
Netzwerkanschluss Logisch:
Physisch: - IEEE 802.3
- RJ-45 (STP Cat. 5)
Geräteanschluss - 1 × USB 2.0 Hi-Speed
Smartcard-Reader
Unterstützte Transponder:
- 1 × Kontaktloser multiprotokoll RFID-Smartcard-Reader
- 125 kHz/134,2 kHz:
AWID, Cardax, CASI-RUSCO, EM4100, EM4102,
EM4105, EM4200 FDX-B, G-Prox II, HITAG 1/2/S,
Honeywell NexWatch, IDTECK, Miro, Pyramid, Q5, TIRIS
(HDX), T55x7,TITAN, UNIQUE, ZOODIAC
1) Activity-LED (grün)
2) Netzwerkstatus-LED (grün/orange/
rot)
3) RFID-Kontaktfläche
4) Smartcard-Reader-Status-LED
(grün/rot)
5) Serverkommunikation-LED (grün/
rot)
6) Druckstatus-LED (grün)
7) Druckeranschluss (RJ-45) für
1000BaseT, 100BaseTX und
10BaseT *
8) Netzwerkanschluss (RJ-45) für
1000BaseT, 100BaseTX und
10BaseT *
9) USB-Anschluss u.a. für die
Parametersicherung
10) Status-/Reset-Taster
11) Anschluss für die Stromversorgung
über das mitgelieferte Netzteil
Vorderansicht
Rückansicht

20 [de] Quick Installation Guide
LED-Anzeige
Durch die Interpretation des LED-Leuchtverhaltens kann der Zustand des TPR-11
ermittelt werden.
- ISO/IEC 14443 Typ A (13,56 MHz):
Legic advant, MIFARE Classic 1K/Classic 4K/Classic Mini/
DESFire EV1/Plus S/Plus X/Pro X/SmartMX/Ultralight/
Ultralight C, PayPass, SLE 44R35/66Rxx (my-d move)
- ISO/IEC 14443 Typ B (13,56 MHz):
Calypso, CEPAS, HID iCLASS, Moneo, picopass, SRI4K,
SRI512, SRIX4K, SRT512
- ISO/IEC 15693 (13,56 MHz):
EM4x33, EM4x35, HID iCLASS, I·CODE SLI, Legic advant,
M24LR16, M24LR64, picopass, SRF55Vxx (my-d vicinity),
Tag-it
- Auf Anfrage: Cotag, HID Prox, Indala, ioProx, LEGIC prime
Stromaufnahme - 750 mA bei 5 VDC plus USB-Port: 500 mA
Betriebsumgebung - Umgebungstemperatur: 5–40 °C
- Relative Luftfeuchtigkeit: 20–80%
Abmessungen - Breite: 140 mm
- Höhe: 32 mm
- Tiefe: 99 mm
- Gewicht: 150 g
LED Aktion Farbe Beschreibung
Activity unregelmäßiges
Blinken
Blinken
grün
grün
Signalisiert den Austausch von
Netzwerk-Datenpaketen.
Das Gerät befindet sich im BIOS-Modus.
Netzwerkstatus Dauer-An
Dauer-An
Dauer-An
grün
orange
rot
An beiden Netzwerkanschlüssen ist eine
Verbindung vorhanden.
An Netzwerkanschluss 1 oder 2 ist keine
Verbindung vorhanden.
An beiden Netzwerkanschlüssen ist keine
Verbindung vorhanden.
Eigenschaften Werte