SEI Needham TV/Media Stand MS834000TX-Espresso User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[email protected]
www.seidal.com
Needham TV/Media Stand
MS8 4000TX-Espresso
Assembly Instructions
PO:11
740

A
Needham TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
B C
Quantity
of 1
Quantity
of 1
Quantity
of 1
Drawer Face Panel
Drawer Left Side Panel
Middle Adjustable Shelf
Left Adjustable Shelf
Drawer Right Side Panel
Right Adjustable Shelf
E
F
G
Quantity
of 1
Quantity
of 1
Quantity
of 1
I
J
K
Quantity
of 1
Quantity
of 1
Quantity
of 1
Q R S
Quantity
of 1
Quantity
of 1
Drawer Back Panel Bottom Panel Left Middle Panel
Left Door
Right Door
Top Panel
M N O
Quantity
of 1
Fixed Shelf
Left Side Panel
Right Side Panel
D
H
L
P
Quantity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 1
Back Panel
Drawer Bottom Panel
Right Middle Panel
Support Post

Needham TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
Assembly Tool Required
No. 2 Phillips Screwdriver
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 22
1/4” x 1” Bolt
(2)
Quantity
of 20
.5mm x 1
2
mm
Screw For Back
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-6 -5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Quantity
of 4
Magnet
Metal Nut
Metal Pin
( )
(
5
)
(
6
)
(
7
)
(
9
)
(
10
)
Quantity
of 22
Quantity
of
Quantity
of 12
Quantity
of 4
Quantity
of 4
1
/
4
” x
8
mm
Bolt For Drawer
.5mm x 1
5
mm
Screw For Magnet
Metal Knob
(
11
)
5/ 2” x
15
mm
Bolt For Metal Knob
Quantity
of 4
Bracket
Plastic Anchor
Quantity
of 4
(1 )
(14)
Quantity
of 4
7mm x 8mm
Screw For Wall
(15)
Plastic
Chain
.5mm x 15 mm
Screw For Bracket
Quantity
of 2
Quantity
of
Quantity
of 4
Quantity
of 2
(4)
(8)
(12)

Needham TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Insert the Wood Dowels(1) into
predrilled holes in Left Middle
Panel(G).
Step . Attach Left Middle Panel(G) to
the Bottom Panel(F) with Bolt(2).
Step 1. Insert the Wood Dowels(1)
into predrilled holes in Fixed
Shelf(I).
Step 2. Attach Fixed Shelf(I) to the
Left Middle Panel(G).
Figure 2
Fi
gure 1
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 2
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 2
(2)
1/4” x 1” Bolt
Quantity
of 2

Needham TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Fixed Shelf(I)
and Right Middle Panel(H).
Step 2. Attach Right Middle Panel(H) to
the Fixed Shelf(I) and Bottom
Panel(F) with Bolt(2), then
fasten them.
Figure
Figure 5
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom Panel
(F).
Step 2. Attach Side Panels(J,K) to
the Bottom Panel(F) with Bolt(2),
then fasten them.
Step . Attach Support Post(L) to
the Bottom Panel(F) with Bolt(2),
then fasten them.
5/ 2” x
15
mm
Bolt For Metal Knob
(
7
)
Quantity
of 2
(1)
(2)
1/4” x 1” Bolt
8mm x 0 mm
Wood Dowel
Quantity
of 4
Quantity
of 2
Step 1. Attach the Left Door(M) to the
Left Side Panel(J) and Right
Door(N) to the Right Side
Panel(K).
Step 2. Attach Handle(6) to Doors(M,N)
with Bolt For Handle(7).
Figure 4
(
6
)
Metal Knob
Quantity
of 2
(1)
(2)
1/4” x 1” Bolt
8mm x 0 mm
Wood Dowel
Quantity
of 4
Quantity
of 6

Needham TV/Media Stand
Assembly Instructions
S
tep 1. Attach the Magnet( ) to the
Top Panel(O) with Screw For
Magnet(4), then fasten them.
Figure 8
(4)
.5mm x 15 mm
Bolt For Magnet
Quanti
ty
of 4
(5)
.5mm x 12mm
Screw For Back
Quantity
of 20
Figure 7
Step 1. I
nsert the Wood Dowels(1) into
predrilled holes in Side
Panels(J,K) and Middle
Panels(G,H).
Step 2. Attach Top Panel(O) to the Side
Panels(J,K) and Middle
Panels(G,H) with Bolt(2),
then fasten them.
( )
Magnet
Quantity
of 2
Step 1. Attach the Back Panel(P) with
Screw For Back(5).
F
igure 6
(2)
1/4” x 1” Bolt
Quantity
of 8
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 8

(7)
Metal Nut
Quantity
of 1
(6)
1
/
4
” x
8
mm
Bolt For Drawer
Quantity
of 1
5/ 2” x
15
mm
Bolt For Metal Knob
Metal Knob
(8)
Quantity
of 4
(9)
Quantity
of 4
Metal Pin
(10)
Quantity
of 12
Step 1. Place Drawer on Middle Panel(G,H).
Step 2. Insert Wood Dowels(1) into
predrilled holes Drawer Side
Panel(B,C).
Step . Insert the Metal Pins(10) into
desirous holes of inner Side
Panels(J,K) and Middle Panels(G,H).
Step 4. Put the Adjustable Shelves(Q,R,S)
on the Metal Pins(10) in each section.
Step 1. Attach the Drawer Side Panels(B,C)
to Drawer Face Panel(A) with Bolt(2)
through outer predrilled holes in
Drawer Side Panels(B,C).
Step 2. Put the Drawer Bottom Panel(D)
into inner grooves of Drawer Side
Panels(B,C) and Drawer Face Panel(A).
Step . Insert Nut(8) into predrilled holes
on Drawer Back Panel(E), then be
attach Drawer Back Panel(E) to end
side of Drawer Side Panels(B,C),
fasten with Bolts for Drawer(9).
Step 4. Attach Handle(6) to Drawer Face
Panel(A) with Bolt For Handle(7).
Figure 10
Figure 9
(1)
8mm x 0 mm
Wood Dowel
Quantity
of 2
Needham TV/Media Stand
Assembly Instructions
(2)
1/4” x 1” Bolt
Quantity
of 4

Needham TV/Media Stand
Assembly Instructions
Figure 12
Figure 11
Step 1. Move this item to the fastened
wall Bracket(11) and tie in
both Bracket(11) with Plastic
Chain(15) as shown in diagram.
Step 1. Attach Bracket(11) to the
Side Panel(J,K) with Screw
For Bracket(12).
Step 2. Drill 1/4 pilot holes in near
proximity of the Bracket(11)
attached to the Side Panel(J,K)
and tap the Plastic Anchor(1 )
into wall.
Step . Fasten Bracket(11) using
Screw For Wall(14) into the
Plastic Anchor(1 ).
(12)
(11)
Quantity
of 4
(1 )
Plastic Anchor
Quantity
of 4
7
mm x 8 mm
Screw For Wal l
Bracket
.5mm x 15 mm
Screw For
Bracket
(14)
Quantity
of 4
(15)
Plastic Chain
Quantity
of 2
Quantity
of 4

Customer Service 1
-
800
-
6
-
5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not
recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-6 -5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Style No
Parts Letter
Parts Description
Quantity Needed
Parts Replacement Form

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width
of 50” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf
should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS8 4000TX
Needham TV/Media Stand
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 04/26/2012