Seicane S127014 Guide

www.seicane.com
Seicane S127014 2003-2011 Porsche Cayenne aftermarket car
stereo head unit upgrade installation replacement instruction
Seicane S127014 2003-2011 Porsche Cayenne car radio after installation
Please pay attention to the tips about the installation
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please eep all the separate parts from the car. Please ta e great care of the dashboard to avoid
scratching it during its detachment and installation. Please eep handy any parts from the car
and ma e use of all the original screws from the car as much as possible. so each related part of
the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from
Seicane, please chec for more details: http://www.seicane.com/car-dvd-dismantling-device-
srd-400

www.seicane.com
2003-2011 Porsche Cayenne car radio installation guide
1.Pry out the trim piece along the perimeter of the center dashboard with a lever.
2.Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that
there will be four screws in the cars with navigation.

www.seicane.com
3.Carefully ta e the factory stereo out of the dash. When removing the factory radio, please note
that there are two loc ing tabs on the lower tray that can brea easily.
4.Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit
into the tabs on the top edge of the lower tray.

www.seicane.com
5.Press the tab (green arrow) on the antenna lead and pull it out of the stereo.
6.Pull out the connectors at the bac of the stereo (green arrows). Note that some cars may have
different setups based on the vehicle's different years.

www.seicane.com
7. Chec all the accessories for the new Seicane car radio.
8. Connect the harnesses to the bac of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio 's plugs. And put the new Seicane car
radio bac into the dash.
10.Install two screws and trim piece.
11.Turn on the new car radio and have a comprehensive test.
Please note
We suggest you arrange a professional to install it. If you have any questions about installation,
please send us photos about your original car's plugs, we can ma e a wiring diagram for your car.