Sencor SDV 7407H User manual

SDV 7407H
DVD player USER'SMANUAL

EN – 2
CONTENTS
1. Important safety instructions..................................................................................................3
1.1 General safety instructions..............................................................................................3
1.2 Installation, operation .......................................................................................................3
1.3 Service and maintenance................................................................................................4
1.4 Remote control and batteries..........................................................................................4
1.5 DVD player ..........................................................................................................................6
2. Elements of the appliance......................................................................................................8
3. Remote control ..........................................................................................................................9
4. Settings menu............................................................................................................................11
4.1 General settings..................................................................................................................11
4.2 Audio settings ................................................................................................................... 12
4.3 Picture settings................................................................................................................. 13
4.4 Preference settings...........................................................................................................14
4.5 Password settings ............................................................................................................ 15
5. Technical specifications .........................................................................................................16
6. Troubleshooting.........................................................................................................................17

EN – 3
1. Important safety instructions
If you want to use this product correctly, carefully read this user'smanual and store it
for future reference.
1.1 General safety instructions
• Read this user'smanual. Keep the user'smanual in asafe place for future
reference. If you sell or give this product to athird party, hand over the
user'smanual together with the product.
• Follow the instructions contained in this user'smanual.
• Heed all warnings.
• Adhere to all instructions.
• Use only accessories determined by the manufacturer.
• An open flame must not be placed on the appliance, e.g. burning candle.
• Use the appliance in atemperate climate zone.
• Under no condition does the manufacturer or the vendor of the appliance take
responsibility for any direct or indirect damages caused by not adhering to the
instructions for installation, set-up, use, repair or cleaning of this appliance as
described in this user'smanual.
• Protect the appliance against being knocked, dropped, hit and shaken and against
vibrations, humidity and dust.
• Before allowing children to use the appliance, they must be appropriately to their
age, informed about the correct and safe use of the player.
1.2 Installation, operation
• Install the appliance according to the instructions in the user'smanual.
• Leave free space on all sides of the appliance necessary for proper air circulation.
This removes the heat created during operation. Covering the ventilation openings
of the appliance'scase creates arisk of overheating or damaging the appliance.
It is necessary to ensure that the ventilation openings are not blocked, e.g. by
anewspaper, table cloth, curtain, etc. Follow the installation instructions in the
user'smanual.
• Do not install the appliance in direct sunlight or near sources of heat, such
as heaters, heat exchangers, stoves or other appliances (including amplifiers)
producing heat.
• High temperatures significantly reduce the lifetime of electronic components in the
appliance.
• Do not use or leave the appliance in the vicinity of an open fire.
• The appliance must not be exposed to dripping or running water and objects filled
with water must not be placed on it, e.g. vases. Protect the appliance against
rain, spray or contact with any other liquid, do not leave or install the appliance
outdoors. Do not use the appliance outdoors. Not adhering to these instructions
creates arisk of electrical shock or fire hazard.
• Do not use this appliance near water.

EN – 4
• Do not try to circumvent the polarised power plug safety feature. If the power plug
cannot be inserted into your power socket, contact aqualified electrician to replace
the old type of power socket.
• Before connecting the appliance into apower socket, check that the voltage in
your power socket corresponds to the voltage on the rating label of the appliance.
• Make sure to protect the network or mains cable from being stepped on or
pressed, especially in the vicinity of plug, socket or the at point of exit from the
device. The plug (adapter) is used as the disconnecting device and therefore must
be easily accessible.
• Remember to always disconnect the plug (adapter) from the mains socket before
disconnecting the mains cable while the device is powered.
• Disconnect the appliance from the power socket during storms or if you will not be
using it for alonger time.
• Avoid moving the appliance from acold environment to awarm one or vice
versa, or when using the appliance in avery humid environment. Air humidity
may condense on some components inside the case of the appliance and
the appliance may stop working temporarily. If this occurs leave the appliance
in awarm and well ventilated place and wait 1 – 2 hours until the moisture
evaporates and the appliance can once more be used as usual. Take care
especially during the first use of the player immediately after its purchase during
acold season.
1.3 Service and maintenance
• To prevent risk of injury through electric shock or the creation of afire, do not take
the appliance out of the case - there are no parts inside the case repairable or
adjustable by the user without appropriate equipment and qualifications. Should
the appliance require adjustment or repair, contact aprofessional service centre.
• In the case of any unusual events occurring during the use of the appliance, e.g. if
there is adistinct smell of burning insulation or smoke comes out of the appliance,
immediately turn off the appliance, disconnect the appliance from the power
source and do not use the appliance until you have received the results of an
inspection by the employees of the professional service centre.
• Have all repairs carried out by qualified personnel. Repairs are necessary if
the appliance has been damaged in any way, for example if the power cord is
damaged, liquid was poured on the appliance, foreign objects have entered the
appliance, the appliance has been exposed to rain or moisture, if the appliance is
not working as usual or if it has fallen.
• Clean the appliance only with adry cloth.
1.4 Remote control and batteries
• Do not expose the remote control or the batteries to direct sunlight or sources
of heat, such as heaters, heat exchangers, stoves or other appliances (including
amplifiers) that produce heat. Do not use or leave the appliance in the vicinity of
an open fire.

EN – 5
• Neither the remote control nor the batteries may be exposed to dripping or
running water and objects filled with water must not be placed on them, e.g.
vases. Protect against exposure to rain, spraying or pouring of any kind of liquid.
Do not use outdoors. Not following these instructions creates adanger of damage
to the remote control or to the batteries.
• Do not use this appliance near water.
• It is necessary to pay attention to the environmental impact aspects of battery
disposal.
• The incorrect use of batteries may cause the leakage of the electrolyte and
corrosion. To ensure that the remote control works correctly, proceed according to
the instructions below:
– Make sure when inserting batteries to correctly align the polarities.
– Do not recharge, heat, open or short circuit the batteries.
– Do not throw batteries into afire.
– Do not leave flat batteries in the remote control.
– Do not combine various types of batteries or new and old batteries.
– If you will not be using the remote control for along period of time, remove the
batteries to prevent potential damage caused by asubsequent battery leakage.
– If the remote control is not working correctly or its operational range is reduced,
change all batteries for new ones.
– If electrolyte leaks out from the batteries, have the remote control cleaned at an
authorised service centre.
ATTENTION
To prevent afire hazard or injury by electrical shock,
do not expose this appliance to rain or humidity.
ATTENTION
Batteries must not be exposed to excessive heat, for example sunlight,
fire, etc.
This symbol indicates that there is dangerous voltage inside this
appliance, which presents arisk of injury by electrical shock.
This symbol indicates important operating or repair instructions in the
appliance'sdocumentation.
To reduce the risk of injury by electrical shock, do not open the cover.
Have all repairs or adjustments performed by qualified service personnel.

EN – 6
1.5 DVD player
This appliance uses alaser system. In order to learn about the correct operation of
the appliance, please carefully read this user'smanual and store it for future use.
For safety reasons the disc drive opening is located on the side of the appliance,
thus preventing exposure to laser radiation. Under no circumstances should you in
any way attempt to modify or change the disc drive opening. Do not look into the
disc drive opening when inserting adisc into the disc drive or during playback. An
emission of visible laser radiation could occur. Do not look into laser beams.
CAUTION:
THIS DVD PLAYER IS ACLASS 1 LASER PRODUCT.
WHEN USING THE CONTROL ELEMENTS OR CARRYING OUT
SETTINGS AND PROCEDURES, WHICH ARE NOT INCLUDED
IN THIS USER'SMANUAL YOU OR THOSE AROUND YOU MAY
BE EXPOSED TO DANGEROUS LASER RADIATION. BECAUSE
THE LASER BEAM USED IN THIS APPLIANCE IS DAMAGING TO
HUMAN EYE SIGHT DO NOT ATTEMPT TO DISASSEMBLE THE
CASE OF THE DEVICE. LEAVE ALL REPAIRS TO AQUALIFIED
SERVICE CENTRE.
WARNING:
ACCORDING TO FCC REGULATIONS, ANY TYPE OF CHANGE OR
MODIFICATION OF THE APPLIANCE THAT IS NOT EXPLICITLY APPROVED BY
THE MANUFACTURER OR HIS AUTHORISED REPRESENTATIVE MAY LEAD TO
THE USER LOSING THE RIGHT TO USE THIS APPLIANCE.
This product is equipped with copyright protection technology, which is protected
by USA patents and other intellectual property laws of ROVI.
Reverse engineering and disassembly are forbidden.
Notes on the USB connector:
• USB flash drives must be inserted into the appliance directly.
• To prevent data transmission failure or its interference, do not use USB extension
cables. Electrostatic discharges may cause the appliance to malfunction. In
such an event the user must restart the appliance. From USB the appliance can
playback the same file formats and types as from discs. Before using aUSB
flash drive test its ability to communicate with the appliance and its data reading
speed. Please keep in mind that reading data through an external connector
may be slower and that files with high data flow rates may not be played back
smoothly. To achieve maximum reading speed we recommend that you keep
disk space defragmented. Use the FAT32 file system, asingle partition, without
protection. If reading from the USB memory device is not continuous, undesirable
effects may occur such as partial image loss (distortions/checkering effects) or
complete image loss, audio defects, and in extreme cases the operation will be

EN – 7
stopped. Unexpected behaviour of the connected memory device, or the presence
of viruses or other damaging software may cause the functions of the appliance
to stop working, necessitating arestart. The USB connector is the standard type
and is not able to power aUSB device with ahigh power usage (e.g. hard disk
drives HDD). Use devices with independent power supplies and power them from
their own power supplies. The appliance was designed to achieve maximum
compatibility with memory devices. With respect to the variety of devices on the
market it is not possible to guarantee compatibility with every USB device. In the
event of difficulties try formatting the memory device directly in the appliance. If
problems persist, use adifferent memory device.

EN – 8
2. Elements of the appliance
1. POWER CORD
2. OPTICAL
3. HDMI
4. SCART
5. CD DOOR
6. OPEN/CLOSE KEY
7. USB
8. PLAY/PAUSE
9. STOP
10.POWER

EN – 9
3. Remote control
115
16
17
18
19
20
21
22
24
25
26
27
28
30 31
29
23
2
3
4
5
6
8
9
10
11
13
14
12
7
ENTER
12 3
456
789
10+
SUBTITLE
LANGUAGE
OSD
PROGCLEAR
SETUP
SOURCE
MENU WIDE
REPEATSEARCH
REV
FWD
STOP PLAY/PAUSE
PREV
NEXT
VOLUME
-
+
TITLE RETURN A-B SLOW
ANGLE
ZOOM AUDIO STEP
0
1. Turning on the appliance / Stand-by mode (Standby).
2. Numerical buttons
3. 10+ — for entering numbers greater than 10 (e.g. 12, press 10+ and then 2)
4. SETUP — enter the settings menu, exit from it
5. ENTER — confirm aselection in amenu.
6. MENU — go to main DVD menu. For JPEG, return to folder with images.
7. SEARCH — go to required location, title or chapter.
8. REV — fast rewind. Press repeatedly to set the speed (x2 x4 x8 x16
x32 PLAY). Press PLAY for normal playback.
9. STOP — press once to stop and remember the location for continued playback
by pressing RESUME (if not forbidden), press again to delete the memory with
this stored location. For JPEG, display miniature images.

EN – 10
10. FWD — fast forward. Press repeatedly to set the speed (x2 x4 x8 x16
x32 PLAY). Press PLAY for normal playback.
11. TITLE — return to the DVD title menu.
12. RETURN — return to the normal playback menu, and then return to normal
playback from the root menu.
13. ANGLE — viewing angle selection on DVD discs that support it.
14. ZOOM — increase or decrease the size of the picture. When zoomed in,
movement possible using the direction arrows.
DVD/VCD: repeatedly press ZOOM to change magnification:
2x 3x 4x normal size
JPEG: press ZOOM to zoom in (press FWD) or to zoom out (press REV) of the
picture in the range 50-200 %.
15. — Open/Close the disc drive.
16. SUBTITLE — repeatedly press to select from the subtitles available on the disc.
17. LANGUAGE — change OSD language.
18. OSD — show playback time and status information.
19. CLEAR — cancel entered number in the SEARCH or PROGRAM mode.
20. PROG — set playback sequence of the contents on the inserted disc (DVD/VCD/
CD). Press PROGRAM to show the program menu. Enter track/chapter numbers
and select option START. To playback in the normal sequence, press PROG and
select STOP.
21. SOURCE — select the source DVD/USB.
22. MUTE — silence/renew the volume.
23. REPEAT — repeat playback. Repeatedly press REPEAT to select the repetition
of asingle item, all items, afolder or to cancel repetition; depending on what is
available.
24. PREV — skip to previous item, track, chapter.
25. PLAY/PAUSE — start and pause playback.
26. NEXT — skip to next item, track, chapter.
27. VOL+/– — change volume.
28. SLOW — for slow playback of DVD, speeds are: 1/2, 1/4, 1/8, 1/16, Normal.
29. A-B — repetition between two points. Press once to designate point A, press
again to designate point B and start repetition between them. Press athird time
to cancel A-B mode.
30. STEP — step playback of DVD.
31. AUDIO — switch soundtrack on the DVD (if available on the disc.), or audio on
CD/VCD channels (left, right, mix, stereo).

EN – 11
4. Settings menu
Press the SETUP button to enter the settings. Use the LEFT/RIGHT arrows to move
to the desired page. Use the DOWN arrow to select an item, its current value will be
shown, if available. Use the RIGHT arrow or ENTER to go to the item values. Use the
UP/DOWN arrows to select anew value and use ENTER to confirm it. Use the LEFT
arrow to return to item selection and press again to go to page selection. Set all
items as to your requirements, then press SETUP to leave the appliance settings.
Note:
During playback or in the RESUME mode the PREFERENCE screen is not
available.
4.1 General settings
- - GENERALSETUP PAGE - -
GOTO GENERAL SETUP PAGE
TV DISPLAY WIDE
ANGLE MARK ON
OSD LANGUAGE ENG
CLOSED CAPTIONS ON
SCREEN SAVER ON
$87267$1'%< 3H
4:3 PANSCAN
4:3 LETTERBOX
16:9
ON
OFF
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
PORTUGUESE
ON
OFF
ON
OFF
3 HOURS
4 HOURS
OFF
TV DISPLAY — select the side aspect ratio and its appearance on aconnected
television.
4:3 PANSCAN — wide-angle picture is cropped to fill the entire screen 4:3.
4:3 LETTERBOX — wide-angle picture is shown on a4:3 ratio with black bands
above and below so that the entire original picture is shown.
16:9 — widescreen display. On a4:3 screen the width of the picture may be
stretched out.
Angle mark — permission to display marks indicating the presence of multiple
viewing angles on adisc and the currently selected viewing angle.
OSD Language) — menu language selection from those available in the appliance.
Hidden subtitles (CLOSED CAPTIONS) — turn on/off hidden subtitles if available on
the disc.

EN – 12
Screensaver — turn on/off screensaver.
Automatic Standby (AUTO STANDBY) — set the appliance to turn off after 3 or
4 hours of inactivity, e.g. forbid this function (the appliance will stay on until it is
turned off manually).
4.2 Audio settings
Digital output — Select one of the three available modes: SPDIF/PCM, SPDIF/RAW
or OFF.
-- --
DOLBY DIGITAL DUAL MONO
DYNAMIC
STR STR
L-MONO
R-MONO
MIX-MONO
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FULL
OFF
-
- - - -AUDIO SETUP PAGE
GO TO AUDIO SETUP PAGE
DOWNMIX STR LT/RT
STEREO
DIGITAL OUTPUT STR SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
DOWNMIX — settings for your DVD player'sstereophonic analogue output. LT/RT for
aconnected Dolby Pro Logic decoder or Stereo for playback of only the audio from
the first two channels.
DOLBY DIGITAL — digital audio processing settings
•Dual Mono: audio from each channel is sent to asingle output (Stereo).
Or only the audio of the left (L-Mono), only of the right (R-mono) or the composite
of the left and right channel (Mix-Mono) will be sent to both outputs.
•Dynamic – reduction of the dynamic range of digital audio

EN – 13
4.3 Picture settings
-- --
VIDEO OUTPUT RGB
RESOLUTION
COLOR SETTING
HDMI SETUP
- - - -VIDEO SETUP PAGE
RESOLUTION
480I
480P(720)
720P(60Hz)
1080I(60Hz)
1080P(60Hz)
576I
576P(720)
720P(50Hz)
1080I(50Hz)
1080P(50Hz)
24BIT
30BIT
36BIT
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
MID
00
00
00
00
HIGH
MEDIUM
LOW
HDMI
AUDIO SOURCE
DEEP-COLOR
ON
AUTO
24BIT
ON
OFF
AUTO
PCM
RGB
OFF
YUV
Video output — picture output in SCART, YUV, RGB or Off (composite video).
Colour settings (COLOR SETTING)
Sharpness (SHARPNESS) — degree of sharpness of picture details.
Brightness, Contrast, Hue, Saturation
— set picture according to your preferences. The hue option is intended only for
NTSC sources.
Attention:
Proceed carefully with the following items, also using your TV'suser'smanual. It
may happen that the picture on your TV will not appear and areturn to working
setting will only be possible with an analogue connection (e.g. SCART).
Resolution — select HDMI output resolution for your TV.
HDMI — select advanced HDMI output options according to your TV. Audio
transmission can be force selected to PCM or automatically depending on the source
being played. Deep colours can be set from the default 24-bit value to 30-bit or
36-bit.

EN – 14
4.4 Preference settings
- - PREFERENCE SETUP PAGE - -
GOTO PREFERENCE PAGE
TV TYPE PAL
AUDIO ENG
SUBTITLE ENG
DISC MENU ENG
PARENTAL
DEFAULT
PAL
AUTO
NTSC
1 KID SAF
2 G
3 PG
4 PG13
5 PGR
6 R
7 NC17
8 ADULT
RESET
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
PORTUGUESE
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
PORTUGUESE
OFF
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
PORTUGUESE
MPEG4 SUBTITLE
TV type — picture colour output system selection, PAL, NTSC or Auto (depending on
the disc).
AUDIO — select your preferred audio language; if it is found on the disc being
played, it will be set preferentially.
SUBTITLE — select your preferred subtitle language; if it is found on the disc being
played, it will be set preferentially
Disc menu (DISCMENU) — select your preferred control menu language; if it is found
on the disc being played, it will be set preferentially.
Parental control (PARENTAL) — for discs containing information about the
recommended minimum viewing age; age group can be set. May forbid the playback
of certain discs, which are not suitable for children or allow certain discs with
alternative scenes to be played.
MPEG4 Subtitles (MPEG4 SUBTITLE) — select Central European languages or
Russian for external subtitles on MPEG4 files.
Default — Restore all settings to factory settings.
Note:
To enable entry to the Preferences page, the disc must have stopped completely
(2×STOP).

EN – 15
4.5 Password settings
- - PASSWORD SETUP PAGE - -
GOTO PASSWORD SETUP PAGE
PASSWORD MODE ON
PASSWORD
ON
OFF
Password mode — when set to Off, parental control will not require apassword.
When set to On, the password will be required based on the parental control settings.
Password — apart from the factory password (1369) you may select your own. In
the following window, enter your old password, then the new password and then
reconfirm the new password again; it will be saved if it matches.
Note:
The factory password is valid even when you select adifferent custom password.

EN – 16
5. Technical specifications
Power source: 100-240 V, 50/60 Hz
Power input: <8 W
Frequency range: 20 Hz to 20 kHz (1 dB)
Signal to noise ratio: more than 80 dB (analogue output)
Dynamic range: more than 85 dB (DVD/CD)
VIDEO output: 1 VP-P (75 Ω)
AUDIO output: 2 VRMS (1 kHz, 0 dB)
Laser: Semiconductor laser, 650 nm
Standard: NTSC / PAL
Operating humidity: 5 % to 90 %
Operating position: horizontal
Note:
The design and technical specifications are subject to change without prior notice.

EN – 17
6. Troubleshooting
Symptom Causes Remedy
Picture
No picture is
shown or is
distorted.
•The video cable is not
firmly connected.
•Connect the video cable
firmly.
•The video input mode of
the appliance connected
to the television is not set
correctly.
•Set the appropriate video
input mode.
Audio
No audio can be
heard
or it is distorted.
•The audio cables are not
connected properly.
•Connect the audio cables
firmly.
•Volume is set to alower
level.
•Increase the volume.
•Audio is turned off. •Turn the audio on by
pressing the MUTE button
on the remote control.
•The disc is in the fast
playback / reverse
playback mode.
•Press the PLAY / PAUSE
button.
Disc cannot be
played.
•The disc is incorrect placed
inside the disc drive.
•Check that the disc is
inserted in the disc drive
with the printed side facing
upwards.
•The disc'srating is higher
than the rating set under
the parental control item.
•Restore the parental
control settings.
•The appliance is not
compatible with the disc.
The disc is dirty.
•Clean the disc.

EN – 18
Symptom Causes Remedy
The player
locks up when
a
USB device or
memory card is
connected.
•The connected USB
device or memory card is
probably not certified.
•The player cannot play
uncertified USB devices
and memory cards. In
the event that the player
locks up, turn it off,
disconnect the power cord
from the power socket
and disconnect the USB
device and/or memory
card from the player. Then
turn the player on again.
The player will continue
functioning as normal.
Buttons on the
appliance
are not working.
•Appliance is suffering
from static electricity
interference, etc.
•Turn off the appliance
and disconnect it from the
power source.
•Then insert the plug into
the power source and turn
the appliance on again.
Remote control
does not work or
does not work
properly.
•There are no batteries in
the remote control.
•Insert two type AAA / 1.5
Vbatteries into the remote
control.
•Batteries are flat. •Replace the batteries with
new ones.
•The remote control is not
pointing at the remote
control receiver.
•Check that the remote
control is pointing at the
remote control receiver.
•The remote control is
outside of the operating
range.
•Check that the remote
control is within operating
range.
•The appliance is turned off. •Turn off the appliance
and disconnect it from the
power socket. Then turn
the appliance on again.
•Astrong light (e.g. sunlight)
or fluorescent light (e.g.
fluorescent tube) is shining
on the front panel.
•Shield the remote control
sensor on the appliance
from the light source.

EN – 19
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric or
electronic products must not be added to ordinary municipal waste. For proper
disposal, renewal and recycling hand over these products to determined
collection points. Or as an alternative in some European Union states or other
European countries you may return your products to the local retailer when
buying an equivalent new product. Correct disposal of this product helps save
valuable natural resources and prevents damage to the environment caused by
improper waste disposal. Ask your local authorities or collection facility for more
details. In accordance with national regulations penalties may be imposed for
the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or
supplier for the necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this
product, request the necessary information about the correct disposal method
from the local council or from your retailer.
This product meets all the basic requirements of EU directives related to it.
Changes in the text, design and technical specifications may be made without prior
notice and we reserve the right to make such changes.
The original version is in the Czech language.
Address of the manufacturer:
FAST ČR, a.s., Černokostelecká 1621, Říčany CZ-251 01

EN – 20
Warranty conditions
Warranty card is not apart of the device packaging.
This product is warranted for the period of 24 months from the date of purchase
to the end-user. Warranty is limited to the following conditions. Warranty is referred
only to the customer goods using for common domestic use. The claim for service
can be applied either at dealer’s shop where the product was bought, or at below
mentioned authorized service shops. The end-user is obligated to set up a claim
immediately when the defects appeared but only till the end of warranty period.
The end user is obligated to cooperate to certify the claiming defects. Only completed
and clean (according to hygienic standards) product will be accepted. In case of eligible
warranty claim the warranty period will be prolonged by the period from the date of
claim application till the date of taking over the product by end-user, or the date the
end-user is obligated to take it over. To obtain the service under this warranty, end-
user is obligated to certify his claim with duly completed following documents: receipt,
certificate of warranty, certificate of installation.
This warranty is void especially if apply as follows:
• Defects which were put on sale.
• Wear-out or damage caused by common use.
• The product was damaged by unprofessional or wrong installation, used in contrary
to the applicable instruction manual, used in contrary to legal enactment and
common process of use or used for another purpose which has been designed for.
• The product was damaged by uncared-for or insufficient maintenance.
• The product was damaged by dirt, accident of force majeure (natural disaster, fire,
and flood).
• Defects on functionality caused by low duality of signal, electromagnetic field
interference etc.
• The product was mechanically damaged (e.g. broken button, fall).
• Damage caused by use of unsuitable media, fillings, expendable supplies (batteries)
or by unsuitable working conditions (e.g. high temperatures, high humidity, quakes).
• Repair, modification or other failure action to the product by unauthorized person.
• End-user did not prove enough his right to claim (time and place of purchase).
• Data on presented documents differs from data on products.
• Cases when the claiming product cannot be indentified according to the presented
documents (e.g. the serial number or the warranty seal has been damaged).
Authorized service centers
Visit www.sencor.eu for detailed information about authorized service centers.