CHARGING THE ELECTRIC SHAVER
• Charge, use and store the electric shaver at an ambient temperature of 5–35 °C.
• Make sure that the switch A6 is set to the OFF position before charging the shaver. The electric
shaver can be charged from a power socket or via a computer equipped with an appropriate USB
interface.
• Connect the electric shaver to a power source:
A. Connecting to a power socket
Connect one end of the USB cable Aqa to the power adapter A0, connect the other end to the USB
socket A9 on the underside of the electric shaver. Connect the power adapter A0 to an electrical
power socket (100–240 V).
B. Connecting to a computer
Connect one end of the USB cable Aqa to the USB socket A9 located on the underside of the
electric shaver and connect the other end to the computer.
• After connecting the electric shaver to a functioning power source, the red LED charging indicator
A8 will be lit. A complete charge takes approximately 8 hours.
Note:
If you are charging the electric shaver for the first time or if you have not used it for a long time
then a complete charge requires at least 15 hours.
• Disconnect the charged electric shaver from the power source. The red LED charging indicator A8
will turn off. A fully charged electric shaver will run for approximately 45 minutes. The operating
time may vary depending on the type of facial hair, etc.
Attention:
Do not leave the electric shaver connected to a charging source for longer than 24 hours. If you
regularly charge the electric shaver for longer than 10 hours then this will negatively impact the
battery capacity.
Do not use an electric shaver that is charging. Wait until it is charged.
USING THE ELECTRIC SHAVER
1. Remove the shaving foil protective cover A1.
2. To turn on the electric shaver, press the safety lock A7 while at the same time sliding the switch
A6 upwards to the ON position.
3. Place the foil A2 of the electric shaver on to your skin and make circular and direct motions against
the direction of beard growth. Hold it perpendicular to the skin that you are shaving while using
your other hand to keep the skin taut. Do not moisten the skin before or while shaving, and do not
use a shaving cream or gel.