Sengled SNAP User manual

2
Quick Start Guide
EN
1
LED + WIRELESS CAMERA
Internet
3
Connect your iOS or Android device to your Wi-Fi network.
Twist Snap into the socket until tight. Then rotate the bulb
counter-clockwise until the camera is at 6 o’clock.
Download & install the Snap app. Open the app and create
a new account.
6 o’clock
Tip: make sure the Wi-Fi
signal is strong at desired
socket location

4
Rev 1.0 2015.08
Switch on the power to the socket and follow the in-app
instructions to set up your new Snap bulb.
My Snap
Please click “+” to add a new Snap
bulb. Or to view Snap bulbs shared
by your friends and family
ATTENTION
Do not use with dimmers.
Snap bulbs require constant power to operate. Fixtures with
motion sensors may stop the flow of electricity to the socket.
T
he effective range of your Wi-Fi router may not be sufficient
to reach the Snap bulb. A Wi-Fi extender may be required to
increase the range of your Wi-Fi network.
© 2015 Sengled, Incorporated. All rights reserved. Sengled Snap is a trademark
of Sengled, Incorporated, registered in the United States and other countries.
Specifications are subject to change without notice. Other trademarks and
trade names are the property of their respective owners.
No Dimmers No Motion Sensors No Weak Wi-Fi