Sensa Sound SW-C600W User manual
SW-C600W
User Manual
TABLE OF CONTENTS Introduction
Important Safety Notice
Caution
Unpacking Instruction
Accessories Package
Precaution and Suggestion
Back Panel Overview
Subwoofer Connection
Subwoofer Placement
Setting Your Subwoofer
Receiver Set Up
Specification
Design and Feature
Warranty
Introduction
Dear Valued Customer,
Thank you for your purchase of SensaSound SW-C600W subwoofer, before you unpack and install
the products we suggest that you read through this owner’s manual and save it for future reference.
This manual can help you complete the right product connection and placement which will optimize
the subwoofer’s performance successfully. Should you still have any further questions about the
product, please contact your local dealer or directly write us an email about your inquiry. Welcome
to our SensaSound family, it is time to enjoy your sensational sound.
SENSASOUND TEAM
1SENSASOUND C600 CLASSIC
Important Safety Notice
Read and follow these instructions:
1. Do not use this apparatus near water or in any wet environment.
2. Clean the apparatus only with a dry cloth.
3. Keep the apparatus away from any sources that produce heat.
4. The apparatus should be properly installed so that its location or position does not block any
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or
cabinet which may impede the air flow.
5. Power cords should be protected so that they are not likely to be walked on or pinched especially
near the plugs, convenience receptacles, and the point where they exit from the apparatus.
6. Do not defeat the safety purpose of the polarized or grounding-type plug.
7. Only use attachments that are specified by the manufacturer.
8. In order to prevent the damage to the product during lightning or power-line surges, unplug the
apparatus from wall outlet.
9. Use the appropriate shipping tools when moving the apparatus to avoid the injury from tip-over
and fall-off.
10. Do not overload wall outlet and extension cords in order to avoid the risk of fire or electric
shock.
11. Ask for service assistance from qualified personnel when apparatus has been damaged, such
as damage to the supply cord or plug, liquid spillage into the apparatus, damage to the apparatus
from fallen objects, significant change in performance, malfunctions or water exposure etc.
12. Unplug the power cord from apparatus when unused for a period of time.
13. The objects which are filled with water, such as vases, should not be placed on the apparatus.
14. Do not place the apparatus on unstable stand, shelf, bracket or table. This may cause a serious
injury and product damage. Please follow all instructions in this manual.
2SENSASOUND C600 CLASSIC
Caution
This symbol warns the presence of dangerous voltage inside the enclosure. There is a high
risk of electric shock if the product is opened at which the symbol appears. Please follow all
instructions specified in this manual.
Unpacking Instruction
1. Before unpacking the box, check the integrity of the package and ensure that there is no
visual signs of damage. Otherwise you should consult your SensaSound dealer before you start
the installation.
2. When unpacking the box, handle with care in order to avoid any damage to the product.
3. Keep the original carton for future shipping.
Accessories Package
SW-C600W
AC Power Cord
1
Glove & Manual Book
1
TX-C600
Adapter
1
Transmitter
1
Precaution and Suggestion
Important: Turn off all equipments before you making any connection.
1. Normally subwoofer unit is heavy weight, it is important that you properly handle the unit
unpacking, movement and placement, this will help to avoid unnecessary damage to the unit,
operator and floors.
2. Properly connect the system for achieving the best performance. Failing to do so may cause
noise or damage to your equipments. If possible, choose the highest quality cable within your
budget. You need thicker cable for longer runs.
3. SW-C600W is capable of delivering a high-level output to support the bass from your audio
system. We recommend to adjust the sound pressure at a comfortable listening volume.
SENSASOUND C600 Classic
3
Back Panel Overview
Volume Level Control
Low pass Filter
Range: 50-180Hz
or bypass
0-180°
Phase Shift
Signal detection
circuitry
Subwoofer Input
Caution Power Connector
SENSASOUND C600 Classic 4
Subwoofer Connection
1. Before you do the connection, make sure that you have prepared a dedicated subwoofer cable
to support your bass system.
2. Found the place of “subwoofer output” at the rear of your receiver and the place of “SUB IN” at
your subwoofer amplifier board, insert the subwoofer cable from the receiver’s “subwoofer output”
to subwoofer’s “SUB IN”.
3. We recommend to use a “shielded subwoofer cable” to avoid annoying signal into your bass
performance.
4. Found the place of “Power Connector” at your subwoofer amplifier board. Plug the AC power
cord into the back of your subwoofer and then into a wall outlet or power strip. DO NOT plug it into
the back of your receiver or preamp.
5. SW-C600W is sold with a wireless receiver. If you want to use wireless function, insert the TX-
C600 transmitter into the receiver’s “subwoofer output” instead of subwoofer cables.
Subwoofer Placement
Properly place the subwoofer will improve the bass performance greatly and deliver even sound
pressure level throughout your listening area. Here are a few guidelines to help finding the optimal
location.
1. If you use one SW-C600W subwoofer, you can place it within one foot of the corner to get a
greatest output level.
2. If you use a pair of SW-C600W subwoofers, measure the width between two sides of your
room, place them at 1/3 and 2/3 of the room.
3. Different from 5.0 system, the placement rule of subwoofer is much flexible than 5.0 system
since it is a non directional sound unit. Use the golden rule to perform a few experiments to find
a best location in the room until your ears are satisfied with the results.
One Subwoofer Placement A pair of Subwoofer Placement
SENSASOUND C600 Classic
5
Receiver Set Up
Most modern receivers support “On Screen Setup”, you can easily setup your subwoofer by following
the screen setup guidelines.
1. Enter into receiver’s setup menu and go to “Speaker Setup”. Set the subwoofer value to “LFE +
Main” if your front speakers are “small”; if your front speakers are “large”, then set up the
subwoofer value to “LFE”
2. When set up the “crossover”, it’s important to match the crossover point between the front
speaker and subwoofer. (e.g. if your front speaker crossover is at 80Hz, your subwoofer should set
at 90Hz for the best result)
3. In the speaker distance menu, you should measure the distance between your subwoofer and
your mainly listening position, then input the distance value into the menu.
4. The last step is to set up the volume level. You can set the volume at subwoofer’s amplifier board
at 12 o’clock or 2 o’clock place first, then fine-tune the “level calibration” knob at receiver for you
preference SPL level.
Setting your Subwoofer
Recommend Initial Settings
From top to bottom, there are four knobs at
subwoofer amplifier board for adjusting volume level,
crossover, phase and power switch. We recommend to
do an initial setting first, then fine-tune to your
preference value.
Initial setting suggestion:
LEVEL: 12 o’ clock to 2 o’clock
Crossover: 80-100 Hz
Phase: 0 º
Power: Auto
SW-C600W Specification
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz~150Hz
Max Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400W
Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12” Polypropylene Bass Cone
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low-Frequency Reflex Subwoofer
Amplifier Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class D Amplifier
Dimensions (W*H*D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1”*16.5”*14.9”(36cm*42cm*38cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.2 lbs(16.0 Kg)
SENSASOUND C600 Classic 6
Design
SW-C600W is equipped with our state-of-the-art technologies; it is designed to deliver solid and
deep bass to support any hi-fi or home theater systems. This Subwoofer utilizes a 400 watts Class D
amplifier with high effectiveness of power supply, very low-level heat emission to guarantee the
highly safety of the circuits. Unlike traditional subwoofers, this 12” unit offers advanced
polypropylene bass cone, which is distinguished by its high rigidity and low mass driver, making the
SW-C600W full of precision with very low distortion even at extreme listening levels.
SW-C600W adopts a front-firing design with a ported driver at the base to produce a very deep and
explosive bass output. The High Density Fiberboard (HDF) enclosures successfully reduce cabinet
vibrations and resonance to deliver the bass with a vanishingly low distortion.
Additionally, this SW-C600W supports wireless function with a TX-C600 transmitter. It can be
connected with the audio source wirelessly to rescue you out from the intricate cable nets. The SW-
C600W will undoubtedly add solid, deep, room-shaking bass to elaborate the experience of your
listening and movie watching.
Features
•Advanced 12" Front-Firing Polypropylene Bass Cones
This bass driver features its rigidity to endure extreme-level
driver movement and impacts, it can deliver a solid and deep
bass with no distortion.
•Wireless Connection with TX-C600 Transmitter
SW-C600W is designed and built with the wireless function
combined with our TX-C600 transmitter. Your subwoofer can
boost a flexible placement and free of cable constraint.
•400 Watts Class D Power Amplifier
SW-C600W uses an efficient 400 watts class D amplifier with
a high current switching power supply. This allows maximum
performance output with very low heat emission.
•Advanced Rubber and Butyl Suspension
The rubber and butyl suspension ensures smooth response,
deeper and louder bass performance and ideal linearity.
•Anti-Resonant HDF Cabinet
SW-C600W cabinet is made of solid High Density Fiberboard
(HDF) to guarantee that the cabinet is perfectly free of any
unwanted vibrations.
SENSASOUND C600 Classic
Warranty
We promise that all SensaSound speakers are elaborately designed and manufactured with the
strictest quality requirements. Under normal use we warranty them free from defects in materials
and workmanship for a certain warranty period from the original purchase date.
•The warranty for SW-C600W amplifier is valid for 1 year.
•The warranty for other parts of SW-C600W is valid for 3 years.
If any defects in materials and workmanship occur within the limited warranty period, you can get
immediate help from the following ways:
Contact the dealer from whom you purchased the products
However, after the warranty period, you will be responsible for the charges incurred from spare
parts, labor service and shipments, etc.
No matter which way you choose to obtain the service, we need the information of model, serial
number, original purchase date and detailed problem description from you. Once we have
confirmed that any parts need to be repaired or replaced, it is required that you carry or send your
products to the SensaSound dealer where you bought them. Please note, that we also need your
warranty card and purchase proof, so keep them in a secured place after your purchase of
SensaSound products.
Important:
Please do not entrust any repair work to unauthorized person or party. Only the authorized
SensaSound dealers and distributors can provide the original components necessary for servicing
the products. We do not warranty any service to any modified parts that are not from authorized
ways.
Warranty does not include (but are not necessarily limited to) :
•Those caused by force majeure and acts of nature.
•Damages caused by any use other than correct use described in the user manual.
•Damage caused by improper installation, adjustment or was installed in seal up environment.
•Damage caused by shipment other than arranged by SensaSound.
•Bought, repaired, modified or use of parts that are not made or authorized by SensaSound.
•If the serial number has been altered, defaced or removed.
•For deterioration of component parts, the nature of which is to become worn or depleted with
use.
Shipping charge:
If the repairs are covered by the warranty, you need to pay for the charge incurred by sending the
product to the maintenance point, and SensaSound will pay the return shipping charge. We
provide all support and guidance to make sure the process moves smoothly.
7
Table of contents
Other Sensa Sound Subwoofer manuals
