Seraphim SRP 6MA-HV Series User manual

公司名：赛拉弗光伏系统有限公司
Name: SERAPHIM SOLAR SYSTEM CO., LTD.
地址：中国常州市武进区横林镇横遥路1-2号
Add: No.1-2, Hengyao Road, Henglin Town, Wujin District,
Changzhou City, P.R. China
Installation Guide for
SERAPHIM photovoltaic module
2023 V3.5

公司名：赛拉弗光伏系统有限公司
Name: SERAPHIM SOLAR SYSTEM CO., LTD.
地址：中国常州市武进区横林镇横遥路1-2号
Add: No.1-2, Hengyao Road, Henglin Town, Wujin District,
Changzhou City, P.R. China
REGULAR MODULES INSTALLATION MANUAL
常规组件安装手册
1、INTRODUCTION FOR USER MANUAL 用户手册介绍 ...........................................................................- 1 -
1.1、DISCLAIMER 免责申明 ....................................................................................................................... - 1 -
1.2、LIMITATION OF LIABILITY 责任范围 ................................................................................................. - 1 -
2、SAFETY PRECAUTIONS 安全措施 .........................................................................................................- 2 -
2.1、WARNING 警告 ................................................................................................................................... - 2 -
2.2、GENERAL SAFETY 通用安全 ............................................................................................................. - 2 -
2.3、HANDLING SAFETY 操作安全 ............................................................................................................- 3 -
3、UNLOAD/TRANSPROTATION/STORAGE 卸货、运输和存储 ...............................................................- 4 -
3.1、MAKERS ON OUTER PACKAGING 包装标示说明 ............................................................................- 5 -
3.2、UNLOADING WARNNING 卸货注意事项 ........................................................................................... - 6 -
3.3、SECONDARY TRANSPORT AND WARNING 二次运输及注意事项 ................................................. - 7 -
3.4、STORAGE 存储 ................................................................................................................................... - 8 -
3.5. Working Conditions 工作条件 ................................................................................................................- 8 -
3.6. Junction box connector and bypass diode 接线盒连接器和旁路二极管 ...............................................- 9 -
3.7. ELECTRICAL RATING 额定功率 ......................................................................................................... - 9 -
4.UNPACKING SAFETY 拆包安全 ............................................................................................................ - 104 -
5、INSTALLATION 安装 ............................................................................................................................- 106 -
5.1、INSTALLATION SAFETY 安装安全 ................................................................................................ - 106 -
5.2、ENVIRONMENT CONDITIONS AND SITE SELECTION 环境条件与安装地址选择 ..................... - 107 -
5.3、TILT ANGLE OF INSTALLATION 光伏组件安装倾角 .....................................................................- 109 -
5.4、INSTALLATION REQUIREMENTS FOR BIFACIAL CELLS MODULE 双面电池组件安装要求 ...- 111 -
5.5、INSTALLATION METHOD 安装方法 ...............................................................................................- 112 -
6、FIRE SAFETY 防火安全 .......................................................................................................................- 132 -
7、MODULE MAINTENANCE 组件维护 ................................................................................................... - 132 -
7.1、PANEL VISUAL INSPECTION AND REPLACEMENT 组件外观检查和替换 .................................- 133 -
7.2、CONNECTOR AND CABLE INSPECTION 连接器和线缆检查 ...................................................... - 134 -
7.3、CLEANING 清洗 .............................................................................................................................. - 134 -

- 1 -
1、INTRODUCTION FOR USER MANUAL 用户手册介绍
This general manual applies to the installation, maintenance and use of the single glass Solar modules
manufactured by Seraphim Solar System Co., Ltd (hereinafter referred to as “Seraphim”). Failure to follow these
instructions could result in personal injury or property damage.
本手册适用于赛拉弗光伏系统有限公司 (以下简称 赛拉弗)生产的所有系列太阳能组件的安装、维护和使用。
如果不遵守，将可能导致人员伤亡或财产损失。
Installation and operation of PV modules requires professional skills and should only be performed by
qualified professionals. Please read the “Safety and Installation Instructions” carefully before using and operating
the modules.
安装和操作太阳能组件需要专业的技能，只有专业人员才可以从事该项工作。请在使用和操作组件之前仔细阅
读安全和安装说明。
The word “module” or “PV module” used in this manual refers to one or more Solar modules. Please keep
this manual for future reference.
本手册中的“组件”或“PV组件”指的是一个或多个太阳能组件。请保留此说明书以供将来参考。
1.1、DISCLAIMER 免责申明
1、Jiangsu Seraphim Solar System Co., Ltd reserves the rights to change this User Manual without prior
notice. Please refer to our product lists and documents published on our website at: https://www.hg-energy-
group.com as these lists are updated on a regular basis.
江苏赛拉弗光伏系统有限公司保留在没有预先通知的情况下变更本安装手册的权利，最新版请参考赛拉弗网站
（https://www.seraphim-energy.cn/）上的产品和文件资料。
2、In the event of any inconsistency among different language versions of this document, the English version
shall prevail.
如果本手册的不同语言版本有描述不一致的情况，以英文版为准。
3、Failure of the customer to follow the requirements outlined in this Manual during the installation of the
module will result in the invalidity of product's limited warranty.
客户在安装组件过程中未按照本手册中所列出的要求操作，会导致提供给客户的产品有限质保失效。
4、Seraphim is not responsible for any infringement of third party patents or any other rights arising from the
use of Solar PV modules.
使用太阳能光伏组件过程中所产生侵犯第三方专利权或任何其他权利，赛拉弗概不负责。
5、The information in this manual is based on Seraphim’s knowledge and experience and is believed to be
reliable, but such information including product specification (without limitations) and suggestions Do not
constitute a warranty, expresses or implied.
本手册的信息基于赛拉弗的被认为是可靠的知识和经验，但是包括但不限于如下的产品规格的这些信息和相关
的建议并不构成任何保证条款，无论明示的或隐含的。
1.2、LIMITATION OF LIABILITY 责任范围
Seraphim is not responsible for any form of damage, including but not limited to module operation and
system installation error, and personnel injury, hurt, and property loss resulting from failure to follow the
instructions in this Manual.
赛拉弗不为任何形式的伤害负责，包括但不限于组件操作、系统安装失误以及未按照本手册的指示产生的身体
伤害、受伤和财产损失负责。

- 2 -
2、SAFETY PRECAUTIONS 安全措施
2.1、WARNING 警告
Before attempting to install, wire, operate and/or service the module and other electrical equipment, all
instructions should be read and understood. Direct current (DC) is generated when the battery surface of the
module is exposed to direct sunlight or other light sources, and direct contact with the live parts of the module,
such as terminals, may result in death of personnel whether connected to the module or not.
对组件进行安装、接线、操作或维护前，应阅读并理解所有安全细则。当组件电池面直接暴露在阳光或其他光
源下时，会产生直流电(DC)，无论是否连接组件，直接接触组件带电部分，例如接线端子等，将可能导致人员伤
亡。
2.2、GENERAL SAFETY 通用安全
Modules rated for use in this application class may be used in system operating at greater than 50V DC or
240W, where general contact access is anticipated. Modules qualified for safety through IEC 61730-1 and IEC
61730-2 and within this application class are considered to meet the requirements for safety class II equipment.
组件可用于公众可能接触的、大于直流50V或240W以上的系统。并且组件通过了IEC61730-1和IEC61730-2两
部分，满足安全II类的要求。
（1）All installation work must comply with the local codes and the relevant international electrical standards.
所有的安装工作必须完全遵守当地法规和相应的国际电气标准。
（2）Seraphim recommends that PV module installation is conducted by personnel who have been
professionally trained in PV system installation. Operation by personnel who are not familiar with the relevant
safety procedures will be very dangerous.
建议由经过光伏系统安装专业培训的人员进行安装。如由不熟悉相应安全程序的人员操作将会非常危险。
（3）Do not allow unauthorized persons to access the installation area or module storage area.
不允许未经授权的人员接近安装区域或者组件仓储区域。
（4）Protective clothing (non-slip gloves, clothes, etc.) must be worn during installation to prevent direct
contact with 30V DC or greater, and to protect hands from sharp edges.
使用恰当的防护措施(防滑手套、工作服等)以避免安装人员与30V直流或更高电压直接接触，同时避免在安
装过程中手直接与组件锋利的边缘接触。
（5）Prior to installation, remove all metallic jewelry to prevent accidental exposure to live circuits.
安装时请不要佩戴金属饰物，以免戳穿组件，引起触电危险。
（6）When installing modules in light rain, morning dew, take appropriate measures to prevent water ingress
into the connectors, f. e. using connector endcaps.
如果在阴雨、晨雾的天气安装，需采取适当的措施避免水浸入连接器。
（7）Use electrically insulated tools to reduce the risk of electric shock.
请使用绝缘工具以降低触电的风险。
（8）Do not use or install broken modules.
不要使用或安装已损坏的组件。
（9）External or artificially concentrated sunlight shall not be directed onto the front or back face of the PV
module.
外部或人为聚焦的阳光不得直射到光伏组件的正面或背面。
（10）Do not contact module surface if the front or rear glass is broken. This may cause electric shock.

- 3 -
如果在表面玻璃损坏或背板磨损的情况下接触组件的表面或边框可能会引起触电。
（11 ）Do not attempt to repair, disassemble or move any part of the PV module. The module does not
contain any reusable parts.
不要试图修复、拆解或移动组件中的任何部分，组件内没有用户可二次利用的元件。
（12）Do not connect or disconnect the module when it is energized or connected with an external power
supply. 当组件有电流或外部电流出现时，不得连接或断开组件。
2.3、HANDLING SAFETY 操作安全
（1）Do not stand, walk on or lean on the module directly.
禁止直接在包装或组件上站立、踩踏、行走或跳跃。
（2）Do not damage or scratch the front or backside surfaces of the module.
请不要损坏或划伤组件的玻璃和背板面。
（3）Do not drag. Scratch, bend the output cable with force or with too tight connection. The insulation of
output cable can break and may result in electricity leakage or shock.
请不要拉扯、划伤、用力弯折或过紧安装输出线缆，否则线缆的绝缘部分会被损坏导致电流泄露或触电。
（4）If there is an open fire, please extinguish it with a dry powder extinguisher after disconnecting the power
supply, can not use liquid such as water to extinguish the fire.
如有明火请在断开电源后用干粉灭火器扑灭,不可用水等液体扑灭。
（5）Do not install or handle modules when they are wet or during periods of high wind.
请不要在潮湿或者大风期间安装或处理组件。
（6）At the installation site, take care to keep modules and in particular their electrical contacts, clean and
dry before installation. If connector cables are left in damp conditions then the contacts may corrode. Any module
with corroded contacts should not be used.
在安装现场，请保持组件电器元件的清洁与干燥。如果线缆插头在潮湿条件下互相接触，会被腐蚀。任何被
腐蚀的组件都不能被使用。
（7）Please Do not loosen, unscrew or peel the PV module bolts and frame glue. This may lead to a
reduction of the module’s load rating and potential damage from a fall.
请不要松动、拧下、剥离，光伏组件的螺丝或边框胶，有可能导致组件载荷下降，甚至掉落。
（8）Do not drop PV modules or allow objects to fall down on the PV modules.
请不要让物体直击组件或物体直接掉落在组件上。
（9）Do not touch the terminal box or the ends of the output cables (connectors) with bare hands under
sunlight, regardless of whether the PV module is connected to or disconnected from the system.
在阳光下，请不要在没有任何保护的情况下用手直接触摸组件的接线盒、连接器、线缆等带电体，无论光伏
组件是否与系统连接。
（10）Do not discard the modules at will; special recycling is required. 禁止组件随意丢弃，需要专门回收。

- 4 -
3、UNLOAD/TRANSPROTATION/STORAGE 卸货、运输和存储
Precautions and general safety rules:
预防措施和通用安全细则：
（1）Modules should be stored in a dry and ventilated environment to avoid direct sunlight and moisture and
extra precautions should be taken to prevent connectors from being exposed to moisture or sunlight, like using
connector endcaps.
应将组件储存在干燥且通风的环境中，同时需要采取措施避免连接器暴露在潮湿或者阳光下，比如使用连接
器端帽。
（2）The modules should be stored in the original Seraphim package before installation. Protect the package
from damage. Unpack the modules as per the recommended unpacking procedures. The whole process of
unpacking, transport and storing should be handled with care.
赛拉弗组件在安装前应存储在原包装箱内，请保护好包装不要使其受损。按照建议的拆包步骤打开组件包
装。打开、运输和存储过程需小心操作。
（3）Before installation, ensure that all modules and electrical contacts are clean and dry。
安装前，确保所有组件和电气接触都是干净和干燥的。
（4）Unpacking must be carried out by two or more persons at the same time.
拆包时，必须由2个或2个以上人员同时操作。
（5）Handling the modules requires two or more people with nonslip gloves and both hands.
搬运组件时应由2个或以上的人带防滑手套同时双手手持组件搬运。
（6）Do not lift modules by their wires or junction box.
禁止拉扯组件的导线或接线盒来搬运组件。
（7）Do not handle the modules over-head or stack the modules.
禁止头顶组件搬运；禁止堆叠组件。
（8）Do not place excessive loads on the module or twist the module.
禁止在组件上施加过度的载荷或扭曲组件。
（9）Do not drop or place objects (such as tools) on the modules.
禁止掉落或堆放物品（如安装工具）在组件上。
（10）Do not put the modules in a place that is not supported or stable.
禁止将组件置于无可靠支撑或未固定的环境下。
（11 ）Do not allow the modules to come in contact with sharp-pointed objectives to prevent them from
scratches, avoiding a direct impact on the safety of modules.
禁止组件与尖锐物接触，划痕，以免直接影响组件的安全性。
（12）Do not expose the modules and its connectors to any chemical substance (e.g. oil, lubricant, pesticide,
etc.).
禁止将组件或者其电气接口暴露在化学物质下（比如油，润滑剂，杀虫剂等）。
（13）Before the secondary transportation vehicle is started, it should be bundled with net ropes. The rope
should be fastened to prevent damage to the modules during the transportation. The speed of the vehicle carrying
the modules should be ≤5 km/h.
在二次搬运车辆启动前，应采用网绳捆绑，绳索应系牢，严防组件在运输过程左右晃动造成损坏：搬运组件
车辆行驶速度宜≤5公里/小时。
（14）Each individual module has a unique serial number laminated behind the glass and another

- 5 -
permanently attached to the back-sheet of the module,The last one is on the aluminum frame on the side of the
module. Note all serial numbers in an installation for your future records.
每个单独的组件在玻璃后面都有一个唯一的序列号，另一个永久连接到组件的背板上,最后一个在组件侧面铝框上。
记下安装中的所有序列号以备将来记录。
3.1、MAKERS ON OUTER PACKAGING 包装标示说明
3.1.1 Need both hands to handle it carefully.
需要双手小心操作
3.1.2 Uninstalled modules must be kept dry, not
expose to rain or moisture.
禁止未安装的组件淋雨或者受潮
3.1.3 Modules in carton are fragile, which must be
handled with care.
纸箱中的组件为易碎物品，搬运时应小心轻放
3.1.4 The packaging must be transported upright.
包装在运输时应竖直向上
3.1.5 Do not step on the package and module.
禁止在包装箱和组件上面踩踏
3.1.6 Modules shall be stacked as required, not
exceeding the maximum number of layers printed on
the outer packaging. (no more than two layers).
堆叠组件时请勿超过外包装箱上印刷标志的最高层数限
制（最多堆码2层）
3.1.8 One module shall be handled by at least two persons together. Modules are placed vertically.
一块组件至少需由2个人同时搬运，组件是竖直放置

- 6 -
3.2、UNLOADING WARNNING 卸货注意事项
3.2.1 Use a suitable lifting fixture to handle, no more
than 2 pallets of modules. Before lifting, check whether
the tray and the carton are damaged and whether the
hoisting ropes are strong and firm. Two people shall
support at the two sides of the righting carton gently to
place it on the relatively flat position of the project site.
使用合理的吊装治具，吊装一次性最多允许2托组件。吊
装前应确认托盘和纸箱是否有破损及吊装的绳索是否结
实、牢固。吊装快着地时，两人一人一边扶正纸箱轻 轻
放在项目地相对平坦的位置上。
3.2.2 Use a forklift to remove the module pallets from
the truck.
请使用叉车将组件从货车上卸下来。
3.2.3 Put the modules on level ground.
将组件放置于水平地面上。
3.2.4 Do not stack the modules at the project site.
禁止在项目地将组件堆码。
3.2.5 Store the module in a dry and ventilated place.
将组件放置在通风干燥处。
3.2.6 Cover the module with waterproof material to
prevent it from moisture.
使用遮雨布盖住组件，防止组件受潮。

- 7 -
3.3、SECONDARY TRANSPORT AND WARNING 二次运输及注意事项
3.3.1 Do not remove the original packages if the
modules require long-distance transport or long-term
storage.
如果组件需长途运输或长期存储，请不要拆除原包装。
3.3.2 Packaged products can be transported by land,
sea or air. During transportation, make sure that the
package is fixed securely to the shipping platform
without movement. Do not Stack more than two layers
on truck.
包装完的成品可以通过陆运、海运、或空运进行运输。
在运输过程中：请将包装箱固定在运输平台上，确保包装
不会翻滚。正常卡车运输时，最多2层叠加后运输。（以
陆运为例）
3.3.3 Only one layer stacking is only allowed for
transport at the project site.
项目现场托运，只允许 1层运输。
3.3.4 No transport or handling by pedi-cab or improper
vehicle as shown below.
禁止三轮车，马车或其他不合理车辆转运。
3.3.5 Do not transport the module with rope as shown
below.
禁止用绳子背组件。
3.3.6 Do not carry the modules on the back of one
person as shown below.
禁止单人背组件。

- 8 -
3.4、STORAGE 存储
1、Do not remove the original packaging if the module requires long-distance transport or long-term storage.
如果组件需要长途运输或长期存储，请不要拆除包装。
2、Do not expose the modules to rain or moisture. Store the finished product in a well ventilated, waterproof,
dry and smooth place.
禁止淋雨或者受潮，请将包装的成品置于通风、防雨、干燥及平整的地方。
3、Do not stack modules more than 2 layers. (moisture＜85%RH, temperature range from -20°C to + 40 °C)
组件最多堆码2层（湿度＜85%RH；温度：-20℃～+40℃）
4、The module must be installed as soon as possible in the project site and must not be exposed to rain or
damp. Seraphim shall not be responsible for any damage or collapse of the modules caused by moisture in the
packaging.
到项目地组件应尽快安装，禁止暴露在雨水和潮湿环境中，如因为包装受潮导致组件破损、倒塌等问题，赛拉
弗不承担责任。
5、If pallets are stored temporarily outside then place a protective covering over the pallet to protect it from
direct weathering and do not stack more than one pallet high.
如果托盘暂时存放在外面，那么在托盘上放置一个保护性的覆盖物，以防止它直接风化，不要堆叠超过一个托
盘的高度。
3.5. Working Conditions 工作条件
Pmax Temperature Coefficient
-0.42 %/°C
Voc Temperature Coefficient
-0.32 %/°C
Isc Temperature Coefficient
+0.04 %/°C
Operating Temperature
-40~+70 °C
Measurement of nominal module operating temperature
（NMOT）
45±2 °C
Maximum System Voltage(IEC)
1000V/1500V（for –HV&-TB&-BG&-DG）
Grounding conductivity
<0.1Ω
PV module classification
Class II
Insulation Resistance
≥100MΩ
Irradiance
1000 W/m2（STC）/800 W/m2（NMOT）

- 9 -
3.6. Junction box connector and bypass diode接线盒连接器和旁路二极管
Bypass diode
SR3045DY
GF3045MG
Connector
FMK4525A
SB3045DY
QC4.10-cd
UTXCFabcd
FMK4530A
SR4045T
05-6
UTXCMabcd
FMK4530B
SB3050DC
05-8
PV4-S1yx
FMK4530T
SB3050S
TT01
PV-KST4-EVO2/6Ⅱ
FMK5040D
XT3050
PV-TT02(TT02)
PV-KBT4-EVO2/6Ⅱ
GF2045MG
GFS2545
PV-JM601
PV-XT101.1
MBR3045
XT3050M
Z4S-abcde
PV-ZK002
SPA2045
TS3045A
H4Labcdef
PV-ZKC2
GF2045
GF5045
PV4-S14.0
PV-KST4-EVO 2/xy_UR
SB2045DY
GF6045
TL-CABLE01
PV-KBT4-EVO 2/xy_UR
TL2045+
GF3045
H4CFC4DMS
PV-KST4/xy-UR
PS4020A
3045W
H4CMC4DMS
PV-KBT4/xy-UR
PS4025
3045S
PS4025
4045W
TP3045
4045S
3.7. ELECTRICAL RATING 额定功率
SRP-XXX-6MA-HV/ SRP-XXX-6MA/ SRP-XXX-6MA-TB （ XXX=330-400 ）
Electrical Characteristics
Rated Power
(Pmp)
330
335
340
345
350
355
360
365
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
37.3
37.5
37.7
37.9
38.1
38.3
38.5
38.7
Maximum
Power Current
(Imp)
8.85
8.94
9.02
9.11
9.19
9.27
9.36
9.44
Open Circuit
Voltage (Voc)
47±2%
47.2±2%
47.4±2%
47.6±2%
47.8±2%
48±2%
48.2±2%
48.4±2%
Short Circuit
Current (Isc)
9.13±4%
9.21±4%
9.30±4%
9.39±4%
9.47±4%
9.55±4%
9.64±4%
9.72±4%
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Pmax
Temperature
Coefficient
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
Voc
Temperature
Coefficient
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
Isc
Temperature
Coefficient
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
Rated Power
(Pmp)
370
375
380
385
390
395
400
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
38.9
39.1
39.4
39.7
40
40.2
40.5

- 10 -
Power Voltage
(Vmp)
Maximum
Power Current
(Imp)
9.52
9.6
9.65
9.7
9.77
9.83
9.88
Open Circuit
Voltage (Voc)
48.6±2%
48.8±2%
49.1±2%
49.4± 2%
49.7± 2%
49.9± 2%
50.1± 2%
Short Circuit
Current (Isc)
9.8±4%
9.88±4%
9.93±4%
9.98± 4%
10.05±4%
10.11±4%
10.16±4%
Maximum
Series Fuse
25
25
25
25
25
25
25
Pmax
Temperature
Coefficient
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
Voc
Temperature
Coefficient
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
Isc
Temperature
Coefficient
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
Electrical Characteristics（NMOT）
Rated Power
(Pmp)
241
252
256
260
263
267
271
241
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
35.0
35.5
35.6
35.8
35.9
36.1
36.3
35.0
Maximum
Power Current
(Imp)
6.89
7.10
7.19
7.27
7.33
7.40
7.47
6.89
Open Circuit
Voltage (Voc)
42.4±2%
43.0±2%
43.2±2%
43.4±2%
43.6±2%
43.8±2%
44.0±2%
42.4±2%
Short Circuit
Current (Isc)
7.36±4%
7.59±4%
7.64±4%
7.68±4%
7.75±4%
7.84±4%
7.90±4%
7.36±4%
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Rated Power
(Pmp)
274
278
282
286
290
294
298
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
36.4
36.6
36.9
37.2
37.4
37.6
37.9
Maximum
Power Current
(Imp)
7.53
7.60
7.65
7.69
7.76
7.82
7.87
Open Circuit
Voltage (Voc)
7.97±2%
8.05±2%
8.11±2%
8.18±2%
8.24±2%
8.29±2%
8.35±2%
Short Circuit
Current (Isc)
7.97±4%
8.05±4%
8.11±4%
8.18±4%
8.24±4%
8.29±4%
8.35±4%
Maximum
Series Fuse
25
25
25
25
25
25
25
Electrical Characteristics(low irradiance)
Rated Power
(Pmp)
62.26
63.21
64.15
65.09
66.04
66.98
67.92
68.87
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
36.21
36.41
36.60
36.80
36.99
37.18
37.38
37.57

- 11 -
Power Voltage
(Vmp)
Maximum
Power Current
(Imp)
1.72
1.74
1.75
1.77
1.79
1.80
1.82
1.83
Open Circuit
Voltage (Voc)
±2%
43.93
44.11
44.30
44.49
44.67
44.86
45.05
45.23
Short Circuit
Current
(Isc)±4%
1.80
1.82
1.83
1.85
1.87
1.88
1.90
1.92
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Rated Power
(Pmp)
69.81
70.75
71.70
72.64
73.58
74.53
75.47
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
37.77
37.96
38.25
38.54
38.83
39.03
39.32
Maximum
Power Current
(Imp)
1.85
1.86
1.87
1.88
1.89
1.91
1.92
Open Circuit
Voltage (Voc)
±2%
45.42
45.61
45.89
46.17
46.45
46.64
46.82
Short Circuit
Current
(Isc)±4%
1.93
1.95
1.96
1.97
1.98
1.99
2.00
Maximum
Series Fuse
25
25
25
25
25
25
25
SRP-XXX-6MB-HV /SRP-XXX-6MB/ SRP-XXX-6MB-TB （ XXX=275-330 ）
Electrical Characteristics
Rated Power
(Pmp)
275
280
285
290
295
300
305
310
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
31.1
31.3
31.5
31.7
31.9
32.1
32.3
32.6
Maximum
Power Current
(Imp)
8.85
8.95
9.05
9.15
9.25
9.35
9.45
9.51
Open Circuit
Voltage (Voc)
38.2± 2%
38.4± 2%
38.6± 2%
38.8± 2%
40± 2%
40.2± 2%
40.4± 2%
40.7± 2%
Short Circuit
Current (Isc)
9.13± 4%
9.23± 4%
9.33± 4%
9.43± 4%
9.53± 4%
9.63± 4%
9.73± 4%
9.79± 4%
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Pmax
Temperature
Coefficient
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
Voc
Temperature
Coefficient
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
Isc
Temperature
Coefficient
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
Rated Power
315
320
325
330

- 12 -
(Pmp)
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
32.8
33
33.2
33.5
Maximum
Power Current
(Imp)
9.61
9.7
9.79
9.86
Open Circuit
Voltage (Voc)
40.9±2%
41.1±2%
41.3±2%
41.6±2%
Short Circuit
Current (Isc)
9.89±4%
9.98±4%
10.07±4%
10.14±4%
Maximum
Series Fuse
25
25
25
25
Pmax
Temperature
Coefficient
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
Voc
Temperature
Coefficient
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
Isc
Temperature
Coefficient
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
Electrical Characteristics （NMOT）
Rated Power
(Pmp)
204
208
212
215
219
223
226
230
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
29.5
29.7
29.9
30.0
30.1
30.3
30.4
30.7
Maximum
Power Current
(Imp)
6.91
7.01
7.09
7.17
7.28
7.36
7.44
7.50
Open Circuit
Voltage (Voc)
35.8±2%
36.0±2%
36.2±2%
36.3±2%
36.5±2%
36.7±2%
36.8±2%
37.1±2%
Short Circuit
Current (Isc)
7.37±4%
7.45±4%
7.54±4%
7.63±4%
7.73±4%
7.82±4%
7.91±4%
7.96±4%
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Rated Power
(Pmp)
234
238
242
246
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
30.9
31.2
31.4
31.7
Maximum
Power Current
(Imp)
7.58
7.64
7.71
7.77
Open Circuit
Voltage (Voc)
37.3±2%
37.5±2%
37.7±2%
38±2%
Short Circuit
Current (Isc)
8.05±4%
8.14±4%
8.21±4%
8.27±4%
Maximum
Series Fuse
25
25
25
25
Electrical Characteristics(low irradiance)
Rated Power
51.89
52.83
53.77
54.72
55.66
56.60
57.55
58.49

- 13 -
(Pmp)
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
30.19
30.39
30.58
30.78
30.97
31.17
31.36
31.65
Maximum
Power Current
(Imp)
1.72
1.74
1.76
1.78
1.80
1.82
1.84
1.85
Open Circuit
Voltage (Voc)
±2%
35.70
35.89
36.07
36.26
37.38
37.57
37.76
38.04
Short Circuit
Current
(Isc)±4%
1.80
1.82
1.84
1.86
1.88
1.90
1.92
1.93
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Rated Power
(Pmp)
59.43
60.38
61.32
62.26
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
31.84
32.04
32.23
32.52
Maximum
Power Current
(Imp)
1.87
1.88
1.90
1.91
Open Circuit
Voltage (Voc)
±2%
38.22
38.41
38.60
38.88
Short Circuit
Current
(Isc)±4%
1.95
1.97
1.99
2.00
Maximum
Series Fuse
25
25
25
25
SRP-XXX-6PA-HV /SRP-XXX-6PA
（
XXX=300-350
）
Electrical Characteristics
Rated Power
(Pmp)
300
305
310
315
320
325
330
335
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
35.8
36.2
36.5
36.8
37.0
37.3
37.5
37.7
Maximum
Power Current
(Imp)
8.38
8.43
8.50
8.56
8.65
8.72
8.80
8.89
Open Circuit
Voltage (Voc)
44.7±2%
45.0±2%
45.2±2%
45.3±2%
45.5±2%
45.7±2%
45.9±2%
46.2±2%
Short Circuit
Current (Isc)
8.68±4%
8.73±4%
8.80±4%
8.87±4%
8.96±4%
9.03±4%
9.12±4%
9.20±4%
Maximum
Series Fuse
20
20
20
20
20
20
20
20
Pmax
Temperature
Coefficient
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
Voc
Temperature
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C

- 14 -
Coefficient
Isc
Temperature
Coefficient
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
Rated Power
(Pmp)
340
345
350
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
37.9
38.1
38.3
Maximum
Power Current
(Imp)
8.98
9.06
9.14
Open Circuit
Voltage (Voc)
46.4±2%
46.5±2%
46.7±2%
Short Circuit
Current (Isc)
9.30±4%
9.41±4%
9.50±4%
Maximum
Series Fuse
20
20
20
Pmax
Temperature
Coefficient
-0.35%/°C
-0.35%/°C
-0.35%/°C
Voc
Temperature
Coefficient
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
Isc
Temperature
Coefficient
+0.05%/°C
+0.05%/°C
+0.05%/°C
Electrical Characteristics （NMOT）
Rated Power
(Pmp)
222
226
230
233
237
241
245
248.5
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
34.3
34.4
34.6
34.7
34.9
35.0
35.2
35.3
Maximum
Power Current
(Imp)
6.50
6.57
6.65
6.73
6.80
6.88
6.96
7.04
Open Circuit
Voltage (Voc)
±2%
41.4
41.6
41.8
42.0
42.2
42.4
42.6
42.8
Short Circuit
Current (Isc)
±4%
7.12
7.18
7.23
7.29
7.35
7.41
7.46
7.52
Maximum
Series Fuse
20
20
20
20
20
20
20
20
Rated Power
(Pmp)
252
256
260
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
35.5
35.6
35.8
Maximum
Power Current
(Imp)
7.10
7.19
7.27
Open Circuit
43.0
43.2
43.4

- 15 -
Voltage (Voc)
±2%
Short Circuit
Current (Isc)
±4%
7.59
7.64
7.68
Maximum
Series Fuse
20
20
20
Electrical Characteristics(low irradiance)
Rated Power
(Pmp)
56.60
57.55
58.49
59.43
60.38
61.32
62.26
63.21
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
35.05
35.24
35.44
35.63
35.83
36.02
36.21
36.41
Maximum
Power Current
(Imp)
1.62
1.64
1.65
1.67
1.69
1.70
1.72
1.74
Open Circuit
Voltage (Voc)
±2%
42.80
42.99
43.18
43.36
43.55
43.74
43.93
44.11
Short Circuit
Current (Isc)
±4%
1.70
1.72
1.73
1.75
1.77
1.78
1.80
1.82
Maximum
Series Fuse
20
20
20
20
20
20
20
20
Rated Power
(Pmp)
64.15
65.09
66.04
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
36.60
36.80
36.99
Maximum
Power Current
(Imp)
1.75
1.77
1.79
Open Circuit
Voltage (Voc)
±2%
44.30
44.49
44.67
Short Circuit
Current (Isc)
±4%
1.83
1.85
1.87
Maximum
Series Fuse
20
20
20
SRP-XXX-6PB-HV/SRP-XXX-6PB
（
XXX=250-290
）
Electrical Characteristics
Rated Power
(Pmp)
250
255
260
265
270
275
280
285
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
30.2
30.5
30.9
31.1
31.3
31.6
31.8
32.0
Maximum
Power Current
(Imp)
8.28
8.37
8.42
8.53
8.63
8.71
8.81
8.91
Open Circuit
Voltage (Voc)
37.3±2%
37.5±2%
37.7±2%
37.9±2%
38.1±2%
38.3±2%
38.5±2%
38.7±2%

- 16 -
Short Circuit
Current (Isc)
8.61±4%
8.70±4%
8.78±4%
8.89±4%
8.99±4%
9.08±4%
9.18±4%
9.27±4%
Maximum
Series Fuse
20
20
20
20
20
20
20
20
Pmax
Temperature
Coefficient
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
-0.35%/°C
Voc
Temperature
Coefficient
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
-0. 27%/°C
Isc
Temperature
Coefficient
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
+0.05%/°C
Rated Power
(Pmp)
290
Power Sorting
0~+4.99W
Power
Tolerance
±3%
Maximum
Power Voltage
(Vmp)
32.2
Maximum
Power Current
(Imp)
9.01
Open Circuit
Voltage (Voc)
38.9±2%
Short Circuit
Current (Isc)
9.37±4%
Maximum
Series Fuse
20
Pmax
Temperature
Coefficient
-0.35%/°C
Voc
Temperature
Coefficient
-0. 27%/°C
Isc
Temperature
Coefficient
+0.05%/°C
Electrical Characteristics(NMOT)
Rated Power
(Pmp)
185
189
193
197
200
204
208
212
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
28.78
28.93
29.08
29.24
29.39
29.5
29.7
29.9
Maximum
Power Current
(Imp)
6.46
6.55
6.64
6.73
6.82
6.91
7.01
7.09
Open Circuit
Voltage (Voc)
±2%
34.94
35.12
35.29
35.47
35.64
35.8
36
36.2
Short Circuit
Current (Isc)
±4%
6.91
7.00
7.09
7.18
7.27
7.37
7.45
7.54
Maximum
Series Fuse
20
20
20
20
20
20
20
20
Rated Power
(Pmp)
215
Power Sorting
0~+4.99W

- 17 -
Power
Tolerance
±3%
Maximum
Power Voltage
(Vmp)
30
Maximum
Power Current
(Imp)
7.17
Open Circuit
Voltage (Voc)
±2%
36.3
Short Circuit
Current (Isc)
±4%
7.63
Maximum
Series Fuse
20
Electrical Characteristics(low irradiance)
Rated Power
(Pmp)
47.17
48.11
49.06
50.00
50.94
51.89
52.83
53.77
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
29.22
29.42
29.61
29.81
30.00
30.19
30.39
30.58
Maximum
Power Current
(Imp)
1.62
1.64
1.66
1.68
1.70
1.72
1.74
1.76
Open Circuit
Voltage (Voc)
±2%
33.64
34.02
34.39
34.77
35.14
35.70
35.89
36.07
Short Circuit
Current (Isc)
±4%
1.70
1.72
1.74
1.76
1.78
1.80
1.82
1.84
Maximum
Series Fuse
20
20
20
20
20
20
20
20
Rated Power
(Pmp)
54.72
Power Sorting
0~+4.99W
Power
Tolerance
±3%
Maximum
Power Voltage
(Vmp)
30.78
Maximum
Power Current
(Imp)
1.78
Open Circuit
Voltage (Voc)
±2%
36.26
Short Circuit
Current (Isc)
±4%
1.86
Maximum
Series Fuse
20
SRP-XXX-E01A-HV/SRP-XXX-E01A /SRP-XXX-E01A-TB
（
XXX=365-420
）
Electrical Characteristics
Rated Power
(Pmp)
365
370
375
380
385
390
395
400
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%

- 18 -
Tolerance
Maximum
Power Voltage
(Vmp)
35.8
36.00
36.20
36.40
36.60
36.80
37.00
37.20
Maximum
Power Current
(Imp)
10.20
10.28
10.36
10.44
10.52
10.60
10.68
10.76
Open Circuit
Voltage (Voc)
43.9±2%
44.10±2%
44.20±2%
44.30±2%
44.50±2%
44.70±2%
44.9±2%
45.10±2%
Short Circuit
Current (Isc)
10.73±4%
10.82±4%
10.91±4%
10.99±4%
11.08±4%
11.17±4%
11.25±4%
11.34±4%
Maximum
Series Fuse
25
25
25
25
25
25
25
25
Pmax
Temperature
Coefficient
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
Voc
Temperature
Coefficient
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
Isc
Temperature
Coefficient
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
Rated Power
(Pmp)
405
410
415
420
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
37.40
37.60
37.8
38
Maximum
Power Current
(Imp)
10.83
10.91
10.98
11.06
Open Circuit
Voltage (Voc)
45.30±2%
45.50±2%
45.7±2%
45.9±2%
Short Circuit
Current (Isc)
11.42±4%
11.51±4%
11.58±4%
11.67±4%
Maximum
Series Fuse
25
25
25
25
Pmax
Temperature
Coefficient
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
-0.42 %/°C
Voc
Temperature
Coefficient
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
-0.32 %/°C
Isc
Temperature
Coefficient
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
+0.04 %/°C
Electrical Characteristics (NMOT)
Rated Power
(Pmp)
270
274
278
282
285
289
293
296
Power Sorting
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
0~+4.99W
Power
Tolerance
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Maximum
Power Voltage
(Vmp)
33.1
33.2
33.4
33.6
33.8
34.0
34.2
34.3
Maximum
Power Current
(Imp)
8.19
8.26
8.32
8.40
8.44
8.50
8.57
8.63
Open Circuit
Voltage (Voc)
40.5
40.6
40.8
41.0
41.2
41.4
41.6
41.7