SereneLife BABY SLBBG10 User manual

3-in-1PortableCribforNewbornBaby
Baby Bedside Sleeper and Toddler Play Pen
SLBBG10

www.SereneLifeHome.com2
IMPORTANT!
Please read all instructions before assembly
and use of product. Keep instructions for future use.
IMPORTANT: RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
WARNING: BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND
PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN.
WARNING: This product is intended for use for babies aged between 0 and 6
months, weighting up to a maximum of 9kg.
WARNING: When a child is able to sit, kneel or to pull itself up, the crib shall not
be used anymore for this child.
WARNING: Do not use the product if any part is broken, torn or missing.
WARNING: Be aware of the rise of open res and other sources of strong heat,
such as electric bar res, gas res, etc.
• Before assembly, check that the product and all of its components have not been
damaged during transportation.
• Should any part be damaged do not use and keep out of reach of children.
• Make sure the users of this product are knowledgeable on its proper operation.
WARNING: The product is ready for use only when all locking mechanisms are
engaged. Check carefully that these are engaged before use.
WARNING: When the child is left unattended in the product, in “crib mode”, and
the zippers are completely closed.
• When the products is being used especially in “crib mode”
• All opening, adjusting, anchoring and positioning operations of the product
must be carried out exclusively by an adult.
• Before use in Co-sleeping mode, make sure the product is properly anchored and
positioned.
WARNING: When the product is used in Co-sleeping mode, before laying the child
in it, the product must be secured to the parents’ mattress and no gaps between
the products and the adults’ mattress must be present.

www.SereneLifeHome.com 3
• The product must always be placed on a horizontal surface.
Never leave the product on an inclined surface with the child inside of it.
• Children must not be permitted to play without supervision near the product.
• Do not use the product without the frame.
• The thickness of the mattress must be such that the vertical height (upper surface
of the mattress until the upper edge of the product’s sides) is at least 200mm.
• Do not use more than one mattress in the crib.
• If you purchase a mattress separately, make sure it is suitable for the product.
• The reference mark on the product’s interior indicates the maximum thickness of
the mattress that shall be used.
• Do not leave any object inside the product that could reduce its depth.
• Do not position the cot near walls and obstacles to prevent choking hazards.
• Use only spare parts approved by the manufacturer. Do not apply accessories to
the product, which are not supplied by the manufacturer.
• Do not adjust the product with the child inside.
• Do not move the product with the child inside.
• Do not use the product with more than one child at a time.
• The product must be kept away from electric cables and cords: do not place the
product near windows where cords, curtains or similar objects could pose chocking
or strangling hazards for the child. To avoid strangling hazards, do not give to your
child or place near him, objects equipped with cords.
COMPONENTS
A. Crib frame with fabric lining
B. Central supporting structure
C. Down supporting rod
D. Mattress with removable cover
A
BD
C

www.SereneLifeHome.com4
ASSEMBLY
1 2
3 4
5 6

www.SereneLifeHome.com 5
ASSEMBLING THE CRIB
1. Open the frame leg (g.1), position the frame with fabric lining as showed in
(g.2.)
2. Fix the central supporting structure to the 2 legs as illustrated in gure 3. The
CLICK of the pivot indicates correct xing of the structure (g.4).
3. Fix the down supporting structure to the two legs as illustrated in g.5.
The CLICK of the pivot indicates correct xing of the structure (g.6).
4. Prop up the frame as illustrated in g.7 and fasten the fabric linging onto the
central. Supporting structure tube as illustrated in g.8.
5. Position the mattress on the bottom of the crib (g.9). At this point the crib is
ready to be used (g.10).
7 8
910

www.SereneLifeHome.com6
WARNING: Check to make sure that all of the fasteners have been correctly
attached and that the zips are closed and locked right to the end of their travel.
HEIGHT ADJUSTMENT OF THE COT
The crib can be adjusted to different height positions. In order to adjust the height,
pull the adjustment lever upwards and lift the crib to the desired position (g.11).
Repeat this operation on the opposite side. The base of the crib can inclined slightly
by adjusting the 2 legs to different heights (g.12).
WARNING: The crib can be inclined with a maximum variance of 2 positions
between one leg and the other. (for example: the right leg in position 3 and the
left leg in position 1)
WARNING: The head of the child should always be positioned on the highest side.
11 12
13 14

www.SereneLifeHome.com 7
BEDSIDE SLEEPING MODE
The crib can be used next to parents bed (Bedside Sleeping Mode).
WARNING-IMPORTANT FOR THE SAFETY OF YOUR CHILD
This method is only possible with bed types that comply with all of the conditions
described in this paragraph. In particular the side support of the crib should always
be put close to the parent’s mattress and the mattress should always be aligned
with the height of the side support for restraint of the crib.
WARNING
• Check to make sure that the crib in the Bedside Sleeping Mode does not interfere
with the parent’s bed.
• During use, make sure that the parents bed sheets, blankets etc. do not enter and
cover the interior of the crib.
6. Open the side of the crib with the window using the side zips and open them
completely (g.13)
7. Then press the removable tubular structure release button and remove partially
on one side and then on the other (g.14.15.16).
WARNING: Use the crib with the tube lowered, only in the Bedside Sleeping Mode.
Move the crib close to the parent’s bed and check the height of crib compared
with the mattress of the bed.
WARNING: The height of the parent’s mattress should always be more than that of
the side support for containment of the crib. In the Bedside Sleeping Mode the 2
legs of the crib should always be adjusted to the same height.
15 16

www.SereneLifeHome.com8
WARNING
• Product use is only permitted with beds and/or mattresses with straight sides.
Use of the product with round beds and/or mattresses or water beds is not
permitted.
• When the product is used in the “Bedside Sleeping Mode” (it should always be
positioned next to the long side of access to the bed. DO NOT position the
product to the head or bottom of the bed.)
MAINTENANCE ADVICE
The crib and the mattress have a resistant fabric cover, which is completely
removable and washable. The removal/application activities should be carried out
by adults only. On a regular basis check the condition of the product and the
presence of any possible damage. In the case of damage do not use it and keep it
out of the reach of children.
• For washing of the fabrics, carefully comply with the instructions indicated on the
label.
• For cleaning do not use solvents, abrasive products or aggressive products.
The cot do not swing
In order to make it stable on the at level
when baby in the crib; we have two support
frame on the base of cot; to ensure the
baby not drop down and never swing on
the crib cot;
WARNING!
This crib swing function must be operated
by adult, whenever before the adult left,
adult must close the swing function in
order not to make crib rollover.
Hand wash in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

www.SereneLifeHome.com 9
After each wash check the resistance of the fabric and of the stitching.
WARNING: During the removal and/or application of the lining, handle the fabric
carefully in order to avoid accidental damage or tears.
WARNING: The removal and/or application operations may take a few minutes
and should be carried out by an adult.
DISASSEMBLING THE CRIB
The crib can be fully disassembled in order to store it in the bag supplied with the
product. To disassemble the crib, remove the crib from the frame then disassemble
the frame.
REMOVABLE FRAME
8. Open the side of the crib with the window using the side zips and open them
completely (g.17).
9. Then press the removable tubular structure release button and remove partially
on one side and then on the other (g.18,19).
10. Unfasten the velcro as showed in (g 20).
11. Open the zip located on the upper edge of the crib (g 21, 22) and remove the
fabric lining completely (g.23).
17 18

www.SereneLifeHome.com10
19 20
21 22
23

www.SereneLifeHome.com 11
FEATURES:
• Easy and Tool-free Assembly
• One hand Locking Mechanism
• Easy to Move with Locking Wheels
• Easy Compact Fold
• Removable Full-Size Bassinet
• Lightweight and Portable Design
• Easily Take it on Trips to the Park or Beach
• Made of Friendly Fabric
• Adjustable Cradle for Bedside Use
• Safe and Comfortable Materials
• Breathable Mesh Sidewalls
• Removable and Machine-Washable Sheet and Side Fabric
• 6 Gears Adjustable Height
• Prevent Baby from Spitting Up Milk
• Can be Changed to Swing Crib
• Retractable Crib Foot Tubes to Help Stabilize and Sway as Needed
WHAT'S IN THE BOX:
• Portable Baby Crib • Storage bag • Storage basket
TECHNICAL SPECS:
• Construction Materials: Fabric: Linen, Frame: Steel
• Adjustable Height: 27.95’’ to 33.86’’ -inches
(27.95’’ – 29.13’’ – 30.31’’ – 31.49’’ – 32.67’’ – 33.86’’), 6 Gears Adjustable Height
• Assembled Dimensions (L x W x H): 37'' x20.47 '' x 33.86'' -inches
• Disassembled Dimensions (L x W x H): 37.4'' x 21.46'' x 5.91'' -inches
• Bed Dimensions (L x W x H): 37'' x 20.47'' x14.57'' -inches

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]
FEATURES:
• Easy and Tool-free Assembly
• One hand Locking Mechanism
• Easy to Move with Locking Wheels
• Easy Compact Fold
• Removable Full-Size Bassinet
• Lightweight and Portable Design
• Easily Take it on Trips to the Park or Beach
• Made of Friendly Fabric
• Adjustable Cradle for Bedside Use
• Safe and Comfortable Materials
• Breathable Mesh Sidewalls
• Removable and Machine-Washable Sheet and Side Fabric
• 6 Gears Adjustable Height
• Prevent Baby from Spitting Up Milk
• Can be Changed to Swing Crib
• Retractable Crib Foot Tubes to Help Stabilize and Sway as Needed
WHAT'S IN THE BOX:
• Portable Baby Crib • Storage bag • Storage basket
TECHNICAL SPECS:
• Construction Materials: Fabric: Linen, Frame: Steel
• Adjustable Height: 27.95’’ to 33.86’’ -inches
(27.95’’ – 29.13’’ – 30.31’’ – 31.49’’ – 32.67’’ – 33.86’’), 6 Gears Adjustable Height
• Assembled Dimensions (L x W x H): 37'' x20.47 '' x 33.86'' -inches
• Disassembled Dimensions (L x W x H): 37.4'' x 21.46'' x 5.91'' -inches
• Bed Dimensions (L x W x H): 37'' x 20.47'' x14.57'' -inches