SereneLife PSPR190 User manual

CordlessLithiumPowerPruner
withTelescopicHandle
PSPR190
Pruning Shear with 7.2V Lithium-ion Battery Powered
Garden Electric Pole Pruner

www.SereneLifeHome.com
2
1
2
3
4
Fig. 1a
5 6
7
12
11
10
8
9

13 14 15
www.SereneLifeHome.com
3
Fig.1b
Fig. 2
Fig.3a Fig.3b

www.SereneLifeHome.com
4
19 18
1 16 17
1
1
45°
20
Fig.4 Fig.5a
Fig.5b Fig.5c
Fig. 6a Fig. 6b

www.SereneLifeHome.com
5
Fig. 7a Fig. 7b
Fig. 8
Fig. 9

www.SereneLifeHome.com
6
1. Safety Regulations
General Power Tool Safety Warnings
WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool”
in the warnings refer to your electric (corded) power tool or battery-operated
(cordless) power tool.
Explanation of the warning signs on the equipment (see Fig. 2)
1: Warning!
2: WARNING – To reduce the risk of injury, user must read instruction manual!
3: Wear eye and ear and head protection!
4: Wear protective gloves!
5: Wear safety footwear!
6: Do not expose to rain!
7: Keep bystanders away danger of injury from ying parts! Always maintain a
suciently safe distance. Beware of thrown objects. The distance between
the machine and bystanders should be at least 15 meters.
8: Electrical hazard, at least 10m away from the overhead electric-power lines.
9: The guaranteed sound power level LWA is 91dB.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical Safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.

1. Safety Regulations
General Power Tool Safety Warnings
WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool”
in the warnings refer to your electric (corded) power tool or battery-operated
(cordless) power tool.
Explanation of the warning signs on the equipment (see Fig. 2)
1: Warning!
2: WARNING – To reduce the risk of injury, user must read instruction manual!
3: Wear eye and ear and head protection!
4: Wear protective gloves!
5: Wear safety footwear!
6: Do not expose to rain!
7: Keep bystanders away danger of injury from ying parts! Always maintain a
suciently safe distance. Beware of thrown objects. The distance between
the machine and bystanders should be at least 15 meters.
8: Electrical hazard, at least 10m away from the overhead electric-power lines.
9: The guaranteed sound power level LWA is 91dB.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical Safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
www.SereneLifeHome.com
7
e. When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f. If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal Safety
a. Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the o-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your nger on the switch or energising power
tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch does not turn it on and o. Any power
tool that can not be controlled with the switch is dangerous and must be
repaired.

c. Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aect the power tool’s
operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these
instruction, taking into account the working conditions and the work to be
performed. Use of the power tool for operations dierent from those intended
could result in a hazardous situation.
h. Store idle Appliances Indoors - When not in use, appliances should be stored
indoors in dry, and high or locked-up place - out of reach of children.
5. Battery tool use and care
a. Replace only with the charger specied by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of re when used
with another battery pack.
b. Use power tools only with specically designated battery packs. Use of any
other battery packs may create a risk of injury and re.
c. When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a re.
d. Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
e. Do not charge appliance in rain, or in wet locations.
f. Do not use battery-operated appliance in rain.
g. Use only the authorized battery.
h. Do not dispose of the battery in a re. The cell may explode. Check with local
codes for possible special disposal instructions.
www.SereneLifeHome.com
8

www.SereneLifeHome.com
9
i. Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
j. Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
6. Service
a. Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is
maintained.
Cordless Garden Pruners Safety warnings
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Minors should never be allowed to operate the tool; it should never be left
unattended and when not in use should be stored in a locked place out of the
reach of children.
• Don’t use the machine or perform battery charging operations in the rain.
• Don’t leave the machine in rain or wet locations.
• Keep bystanders well away from your work area.
• Be careful not to catch foreign matter between the blades. If the blades are
jammed with foreign matter, immediately switch o the machine. Then remove
the foreign matter from the blades.
• Take care, avoid cutting electrical wires that may be hidden.
• Keep your free hand away from the cutting area. Never touch the blades.
They are very sharp and you may cut yourself.
• Be vigilant when operating to ensure that the ngers on the hand used to hold
or move twigs to be pruned are not exposed to the cutting blade.
• Don’t force the machine to make it cut. You could slip and injure yourself or cut
something else unintentionally.
• Always check the blades carefully before operation.
• Handle the blades with extreme care to prevent cuts or injury from the blades.
• Remove the battery after each use and before attempting to perform inspection
or maintenance.
• Always wear protective gloves when using, adjusting or cleaning the machine.
• Only use the machine for it’s intended use (see “Intended Use”).

www.SereneLifeHome.com
10
Cordless Garden Pole Pruner Safety Instructions
• Keep your free hand away from the cutting area. Never touch the blades.
They are very sharp and you may cut yourself.
• We recommend that people who are using a chainsaw for the rst time should
arrange for a well-versed person to instruct them on how to work with a pole
pruner and the safety equipment, for example in the form of practical exercises.
• Keep your working area free of obstacles and ensure that you have adequate
freedom of movement. Do not work in constricted areas in which you could
continuously get too close to the operating pole pruner.
• Keep your working area tidy and free of off-cuts and other obstacles over which
you could stumble.
• Ensure that you maintain a steady foothold. Only use the pole pruner on at
surfaces where you have a rm footing. Never work on ladders or on slippery
surfaces on which you could lose your balance or otherwise lose control of the
pole pruner.
• Before you start cutting branches: Make sure that there is nobody within a range
of at least 2-2.5 times the length of the branch.
• Take the weather conditions into account when cutting branches. Do not cutting
branches in strong or gusting wind. Do not cutting branches in frost conditions
or on frozen, icy ground. Do not cutting branches in rain or if visibility is poor.
• Always hold the pole pruner with your right hand on the rear handle and your
left hand on the front aluminum pole. Holding the pole pruner with your hands
in the wrong positions increases the risk of injury and must therefore be avoided.
• Always wear suitable working clothes to prevent injuries to the head, hands and
feet. For this purpose wear a helmet, safety goggles (or visor), high boots
(or strong shoes and long trousers made of tough fabric) and work gloves.
• A warning to never allow children, persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge or people unfamiliar
with these instructions to use the machine, local regulations may restrict the age
of the operator.
• Plan an escape route from falling branches in advance. Make sure that this escape
route is free of obstacles which could restrict or prevent free movement.
Keep in mind that freshly cut grass or bark is slippery.
• Keep the hidden wire away from operating area.
• Hold the tool by insulated gripping surfaces only, because the pole pruner may
contact hidden wiring or its own cord.
• When you are working, Keep the equipment away from other people, especially
children, and from pets.
• National regulations can restrict the use of the pruner.

www.SereneLifeHome.com
11
• In order to ensure safe work, a maximum working angle
of 60° is prescribed.
• Never stand below the branch to be cut.
• Potential risk of injury from falling branches projectiles!
• The machine is not protected against electric shock when
coming into contact with high-voltage lines.
Information about the battery
1. The battery pack supplied with your cordless tool is not charged. The battery
pack has to be charged before you use the tool for the rst time.
2. For optimum battery performance avoid low discharge cycles. Charge the
battery pack frequently.
3. Store the battery pack in a cool place, ideally at 59°F (15°C) and charged to at
least 40%.
4. Lithium-ion batteries are subject to a natural ageing process. The battery pack
must be replaced at the latest when its capacity falls to just 80% of its capacity
when new. Weakened cells in an aged battery pack are no longer capable of
meeting the high power requirements and therefore pose a safety risk.
5. Do not throw battery packs into an open re. There is a risk of explosion!
6. Do not ignite the battery pack or expose it to re.
7. Do not exhaustively discharge batteries. Exhaustive discharge will damage the
battery cells. The most common cause of exhaustive discharge is lengthy storage
or non-use of partly discharged batteries. Stop working as soon as the perfor-
mance of the battery falls noticeably or the electronic protection system triggers.
Place the battery pack in storage only after it has been fully charged.
8. Protect batteries and the tool from overloads. Overloads will quickly result in
overheating and cell damage inside the battery housing without this overheating
actually being apparent externally.
9. Avoid damage and shocks. Replace batteries which have been dropped from a
height of more than one meter or which have been exposed to violent shocks
without delay, even if the housing of the battery pack appears to be undamaged.
The battery cells inside the battery may have suered serious damage. In this
respect, please also read the waste disposal information.
10. If the battery pack suers overloading and overheating, the integrated
protective cut-o will switch o  the equipment for safety reasons.
Important: Do not press the ON/OFF switch any more if the protective cut-off
has actuated. This may damage the battery pack.
11. Use only original battery packs. The use of other batteries may result in injuries,
explosion and a re risk.

www.SereneLifeHome.com
12
12. When handling batteries beware of electrostatic charge: Electrostatic
discharges cause damage of the electronic protection system and the battery
cells. Avoid electrostatic charging and never touch the battery poles.
Rechargeable batteries and cordless electric machines and tools contain materials
that are potentially harmful to the environment. Never place any cordless electric
machines or tools in your household refuse. When cordless electric machines or
tools become defective or worn, remove the rechargeable batteries and return
them to your supplier. If the rechargeable batteries cannot be removed, return the
complete cordless machine or tool. You can then be sure that the equipment will
be correctly disposed of by the manufacturer.
Information on chargers and the charging process
1. Please check the data marked on the rating plate of the battery charger. Be sure
to connect the battery charger to a power supply with the voltage marked on
the rating plate. Never connect it to a dierent mains voltage.
2. Protect the battery charger and its cable from damage and sharp edges.
Have damaged cables repaired without delay by a qualied electrician.
3. Keep the battery charger, batteries and the cordless tool out of children’s reach.
4. Do not use damaged battery chargers.
5. Do not use the supplied battery charger to charge other cordless tools.
6. In heavy use the battery pack will become warm. Allow the battery pack to cool
to room temperature before commencing with the charging.
7. Do not over-charge batteries. Do not exceed the maximum charging times.
These charging times only apply to discharged batteries. Frequent insertion of a
charged or partly charged battery pack will result in over-charging and cell
damage. Do not leave batteries in the charger for days on end.
8. Never use or charge batteries if you suspect that the last time they were charged
was more than 12 months previously. There is a high probability that the battery
pack has already suered dangerous damage (exhaustive discharge).
9. Charging batteries at a temperature below 50°F (10°C) will cause chemical
damage to the cell and may cause a re.
10. Do not use batteries which have heated during the charging process, as the
battery cells may have suered dangerous damage.
11. Do not use batteries which have suered curvature or deformation during the
charging process or which show other non-typical symptoms (gassing, hissing,
cracking,…)
12. Never fully discharge the battery pack (recommended depth of discharge
max. 80%) A complete discharge of the battery pack will lead to premature
ageing of the battery cells.
13. Never charge the batteries unsupervised.

www.SereneLifeHome.com
13
2. Layout and items supplied
2.1 Layout (Fig. 1a/1b/5a/6b)
1. Blade – moving
2. Blade – xed
3. ON/OFF switch
4. Safety lock-o
5. The pruner cover
6. The pruner bracket
7. The power connector
8. The telescopic pole
9. The handle Safety lock-o
10. The handle ON/OFF switch
2.2 Items Supplied
• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or transportation
braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, please keep the packaging until the end of the guarantee period.
Important!
The equipment and packaging material are not toys. Do not let children play
with plastic bags, foils or small parts. There is a danger of swallowing or
suocating!
• Original operating instructions
• Safety instructions
3. Intended Use
This machine is intended for domestic use in pruning branches and plants with
a thickness up to 15 mm (hardwood) and 20 mm (softwood).
NOTICE: DO NOT CUT OTHER MATERIAL SUCH AS WIRE, STEEL WIRE, STONE,
PLASTIC, AND SO ON.
11. Clamp coupling for telescopic pole
12. The Rotating button
13. Blade guard
14. Battery
15. Battery charger
16. The blade washer
17. The blade wave washer
18. The blade nut
19. The blade screw
20. The buttery bolt

www.SereneLifeHome.com
14
4. Technical Data
• Cutting capacity: ......................................................... 18 mm (hardwood)
.................................................................................. 25mm (softwood)
• Battery pack: ....................................................... Li-Ion / 7.2 V d. c. / 2.0 Ah
• Charging time: ............................................................................... 3~5h
• Protection class: .................................................................................. III
PSPR190
• Emission sound pressure level: ......................................................... 64dB
• K uncertainty .................................................................................. 3dB
• LpA sound pressure level: ................................................................ 58dB
• LWA sound power level: .................................................................. 78dB
• K uncertainty .................................................................................. 3dB
• Guaranteed sound power level: ..................................................... 85dB(A)
• Vibration ahV: .......................................................................... ≤2.5m/s2
• K uncertainty ............................................................................. 1.5m/s2
• Weight: ......................................................................................... 2.0kg
.................................................. (with extension tube and hand saw blade)
Battery charger
Mains voltage ......................................................... 120-240 VAC ~ 50-60 Hz
Output
Rated voltage ................................................................................. 9V DC
Rated current: ............................................................................... 400 mA
• The vibration emission level has been measured in accordance with a set of
standardized criteria and can be used to compare one power tool with another.
• The specied emission level can also be used to make an initial assessment of
the exposure to vibrations.
• The vibration emission level may vary from the level specied during actual use,
depending on the way in which the power tool is used.
• Try to keep the impact from vibrations as low as possible. Exposure to vibrations
can be reduced by wearing gloves when using the tool, for example, and by
limiting the amount of operating time. This includes the full cycle of operation
(e.g. times when the power tool is switched o and times when the tool is
switched on but no working load is applied).

www.SereneLifeHome.com
15
5. Before starting the equipment
5.1 Installing the battery (Fig. 3a/3b)
Press the both side of the battery pack as shown in Fig. 3a and push the battery
pack into the mount provided. When the battery pack is positioned as in Fig.
3b, make sure that the battery pack latch in place! To remove the battery pack,
proceed in reverse order.
5.2 Charging the battery (Fig. 4)
1. Take the battery pack out of the equipment. Do this by pressing the both side of
the battery pack.
2. Check that your mains voltage is the same as that marked on the charger rating
plate. Connect the power plug of the charging unit to a socket outlet, then insert
the charging unit to battery pack. The red LED was always light.
3. The charging unit will end the charging automatically when the battery is fully
charged (after approx. 3~5 hours). The green LED then lights up and the red LED
light out.
The battery pack can become a little warm during the charging. This is normal.
If the battery pack fails to charge, the green and red LED in the battery lights
up. Check:
• whether there is voltage at the socket outlet
• whether there is good contact at the charging contacts
If the battery pack still fails to charge, send
• the Battery charger
• and the battery pack to our customer service center.
To ensure that the battery pack provides long service, you should take care to
recharge it promptly. You must recharge the battery pack when you notice that
the power of the cordless pruner drops. Never fully discharge the battery pack.
This will cause it to develop a defect.

www.SereneLifeHome.com
16
6. Operation
WARNING:
Before any work on the machine (e. g. maintenance, changing the tool, etc.)
as well as during its transport and storage, Safety lock-o in the o position.
There is danger of injury when the On/Off switch is unintentionally actuated. To
close the blade 1 (Fig. 1) activate the safety lock-o (Fig. 1/Item 4) by pushing it
forward and pressing the ON/OFF switch (Fig. 1/Item 3) at the same time. To open
the blade 1, let go of the ON/OFF switch (Fig. 1/Item 3).
Never operate the machine in an awkward posture. This may cause serious
injury. Keep your free hand away from the cutting area. Never touch the
blades. They are very sharp and you may cut yourself. Always wear protective
gloves while pruning.
6.1 Changing the blade (Fig. 5a-5c)
Warning! Remove battery from pruner before Changing the blade.
Always wear protective gloves when Changing the blade.
Never attempt to operate the machine without the blade, spacer or screw
correctly secured to prevent damage to the machine.
To remove the blade 1, use a Hexagon wrench socket key (not provided) to remove
the blade nut 18 which secures the blade. Remove the blade wave washer 17 and
the washer 16 then remove the blade screw 19 (Fig.5a). Remove the blade 1 along
45° direction (Fig.5b). To Insert the blade 1, Be careful not to allow any foreign
matter to become attached to the blade gear and do not damage it. First Insert
part of the tooth of the blade 1 into the case as shown (Fig.5c), then rotate the
blade 1until the hole of the blade 1 is aligned to the hole of the aluminum gearbox.
Incorrect location of the blade will damage the machine. Ret the blade screw 19
then ret the washer 16 and the wave washer 17, at last tighten the blade nut 18.
Do not over tighten.
7. Connecting the pole (Fig. 6a-6b)
Using the telescopic long handle (Fig. 1)You can prune the branches farther away .
Holding The Connecting pole with one hand, and the front of the pruner with the
other, rst push the battery pack on the pruner in to The pruner bracket(Fig.
1a/Item 6) as shown(Fig. 6a),Until the pruner is fully in place. Close The pruner
cover (Fig. 1a/Item 5) and tighten the buttery bolt(Fig. 6b/Item 20).Then connect
the power connector (Fig. 1a/Item 7) to the battery pack on the pruner.
To take apart, proceed in the reverse order.

www.SereneLifeHome.com
17
8. Using the extention and rotation feature on the Connecting pole
Extend or shorten the length of the telescopic pole(Fig. 1a/Item 8) by loosening
(Fig. 9) the Clamp coupling for telescopic pole (Fig. 1a/Item 11) and pull in or push
out the lower section to achieve the correct height as shown below. Then tighten
the coupling.
8.1 Adjusting the angle of pruner in the vertical direction (Fig. 7a-7b)
Press The Rotating button (Fig. 1a/Item 12) on both sides for the angle of tilt
adjustment. Now you can set the pruner to the required tilt. Release the button
and allow the pruner to lock into position to x the angle of tilt. Four dierent
locking angles are possible. The adjusting range is from 0° to 90°.
8.2 Adjusting the angle of pruner in the horizontal direction (Fig. 8)
Holding The Connecting pole with one hand, and The pruner bracket
(Fig. 1a/Item 6) with the other. Rotate the pruner brack etrmly to the required
angle. The adjusting range is from -90° to +90°.
9. Operation the Pole Pruner
To close the blade activate the handle safety lock-o (Fig. 1a/Item 9) by pushing it
forward and pressing the handle ON/OFF switch (Fig. 1a/Item 10) at the same
time. To open the blade, let go of the handle ON/OFF switch (Fig. 1a /Item 10).
10. Cleaning, maintenance and ordering of spare parts
Warning! Always wear protective gloves when using, adjusting or cleaning
the machine.
10.1 Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust as
far as possible. Wipe the equipment with a clean cloth or blow it with compressed
air at low pressure.
• We recommend that you clean the device immediately each time you have
nished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
• A few drops of oil (e.g. sewing machine oil) will improve the cutting performance
of the blades, but never apply any grease to the blades.

www.SereneLifeHome.com
18
Important!
Never clean the tool under running water- and particularly never with high
pressure - because of the potential danger to persons and property. Keep
your cordless pruner in a dry and frost proof place. Choose a place that
children are unable to enter.
10.2 Maintenance
• To achieve good results you should keep the blades sharp at all times. The tool
should be thoroughly cleaned both before and after use.
• There are no parts inside the equipment which require additional maintenance.
11. Disposal and recycling
The unit is supplied in packaging to prevent its being damaged in transit.
This packaging is raw material and can therefore be reused or can be
returned to the raw material system. The unit and its accessories are made
of various types of material, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your dealer or your local council.
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and
electronic equipment and its implementation in national laws, old electric power
tools have to be separated from other waste and disposed of in an environment
-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of
the electrical equipment must make sure that the equipment is properly disposed
of if he no longer wants to keep the equipment. The old equipment can be
returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does
not apply to any accessories or aids without electrical components supplied with
the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of docu-
mentation and papers accompanying products is permitted only with the express
consent of the iSC GmbH.
Subject to technical changes

www.SereneLifeHome.com
17
This consignment contains lithium-ion batteries. In accordance with special
provision 188 this consignment is not subject to the ADR regulations. Handle
with care. Danger of ignition in case of damage to the consignment package.
If the consignment package is damaged: Check and if necessary repackage.
Features:
• 7.2 Volt Lithium Battery
• 3/4" Standard Cut Capacity
• 52.76’’ x 74.8’’ Min. to Max. Pruner Length
• Safety Switch
• Changeable Battery Pack
• Solo Battery For Portability and Endurable Work
• Easy Cutting
• Ergonomic Handheld Design
• Ideal for Bushes, Roses, Woody Stems and Branches
What's in the Box:
• Cordless Lithium Pruner
• Telescopic Handle
Technical Specs:
• Power Supply: 7.2V
• Battery Type: Lithium-ion Battery
• Battery Capacity: 2000mAH
• Standard Cut Capacity (Fresh branch): 0.71’’ -inch
• Max Cutting Capacity at Full Charge (Fresh branch): 0.98’’ -inch
• Safety Switch: Yes
• Pack: Changeable Battery Pack
• Charge Time: 3-5 Hours
• Cuts Per Full Charge: 0.3’’ -inch branch: 800 cuts
0.4’’ -inch branch: 700 cuts
0.6’’ -inch branch: 300 cuts
0.7’’ -inch branch: 200 cuts
0.8’’ -inch branch: L 80 cuts
• Telescopic Handle Total Reach: 74.8’’ -inches
• Handle Head Vertically Adjustment: 0-90°, 5 Steps
• Handle Head Horizontal Rotation: 180°
• Product Dimension: 51.65'' x 2.69'' x 9.39'' -inches
• Battery Pack
• Charger

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]om