Seyeon FW3150 User manual

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
1
FW3150 User’s Manual
Part 1
(Product Overview)
Version 3.0
Seyeon Technology Co., Ltd
www.flexwatch.com

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
2
Contents
1. Product Overview....................................................................................................................... 4
1.1. FW-3150............................................................................................................................. 4
1.2. Key Functions of FW-3150................................................................................................. 4
1.3. Technical Specification of FW-3150................................................................................... 5
1.4. FW-3150 Packing List......................................................................................................... 7
2. Hardware Description................................................................................................................. 8
2.1. FW-3150 Front Panel View................................................................................................. 8
2.2. FW-3150 Rear Panel View................................................................................................. 9
3. FW-3150 HW installation and basic setup............................................................................... 10
3.1. Before installation, ............................................................................................................10
3.2. Factory Default Condition................................................................................................. 10
3.3. FW-3450 Hardware installation ........................................................................................ 10

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
3
Notice
•The materials in this document are for information use only and are subject to change without notice.
While reasonable efforts have been made in the preparation of this document, to assure its accuracy,
Seyeon Tech. assumes no liability resulting from errors or omissions in this document; or from the use of the
information contained herein.
•Seyeon Tech. reserves the rights to make changes in the product design without reservation and without
notification to its users.
Copyright
Copyright 1999 -2008 Seyeon Tech Co., Ltd. All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent of Seyeon Tech Co., Ltd.
Copyright 1999 -2008 Seyeon Tech Co., Ltd.
810-12 Yeok Sam-dong, Kang Nam-gu, SEOUL, 135-081, KOREA
TEL : [phone] / FAX : [phone]
URL:http://www.flexwatch.com
Warning
To prevent risk of electric shock, do not remove the system-case. Any repair or modifications for the product
will be allowed by qualified service personals only. Do not expose this appliance to water or moisture. Do not
install this product in hazardous areas where highly combustible or explosive products are stored or used.
Important Information
•Before installation, please read and observe all instructions and warnings contained in this manual.
Retain this manual with the original receipt for future reference and warranty.
•If any items are missing from the package when you open the box, Please DO NOT install or OPERATE
the FlexWATCH® server. Contact the local Dealer or Distributor.
•Please record the following information for technical support and the track record in case of any theft or
loss. Serial Number can be found on the underside of FlexWATCH® server.
Warranty
•2 year Limited.
•Product : Network Video Recorder
•Model Name : FW-5450
•Serial Number : _00-30-6F- - - _
•Purchase Date : __________________ (yy/mm/dd)

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
4
1. Product Overview
1.1. FW-3150
FW-3150 server is 1ch Network Video Server, which transmits digital images captured by Analog CCD
camera over the Internet. So users can view real-time live images over the Internet at anytime and anywhere
using the standard web browser such as MS Internet Explorer or Netscape Communicator. There is no need
other specific software to view real-time live images over the Internet. FW-3150 server is state-of-the art
device and leads new generation of monitoring and security solution.
Picture 1 : FW-3150
1.2. Key Functions of FW-3150
zStandalone device built-in web server
zMax 30 fps transmission speed on TCP/IP network
z10M/100M Auto Sensing Ethernet
zEffective Bandwidth & Bit-rate Control by MPEG4
zBuilt-in 2 way Audio transmission (1ch A-in, 1 A-out)
zSupports Dynamic IP users by AOIP server
zSupports Sensor Input, Digital Output
zSupports Transparent mode
zEncryption function by user authentication
zImage transmission function via FTP, Email
zSupports Various PTZ (Pan/Tilt/Zoom) Devices
z1CH V-out for displaying on analog monitor

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
5
1.3. Technical Specification of FW-3150
Model Name FW-3150
Hardware
32bit Embedded CPU
Flash 8Mbytes /SDRAM: 32Mbytes
Linux version 2.4.21 operating system
Battery backed up real-time clock
Video
compression Motion JPEG MPEG-4
Resolution NTSC: 704x480,704x240,352x240,176x112
PAL: 704x576,704x288,352x288,176x144
Frame rate
(each channel)
Motion JPEG: Up to
30/25 fps at D1 (Secondary Stream at QCIF)
MPEG-4: Up to
30/25 fps at D1 (Secondary Stream at QCIF)
Video Streaming Motion JPEG and MPEG-4 Dual Streaming (Simultaneously)
Controllable frame rate and bandwidth
Image setting Compression levels: 6 (Motion JPEG) / 6 (MPEG-4)
Color: color, black & white
Voice APCM 4bit IMA Sampling rates 8KHz Audio
1ch in & 1ch out
LAN interface 10/100BaseT Ethernet auto sensing
Alarm I/O Interface 1 Photo-coupled inputs and 1 Relay output
Video Input 1 Channel Composite Video Input
Video Output 1 loop through analog video outputs
Serial Interface
Two serial ports for console, modem(PSTN & GSM), serial input/output
device, PTZ
COM Port is RS-232,
AUX port can be configured as RS-232, RS-485
Max Baudrate: 115200 bit/s
Security features Multi user level protection for camera access,
PTZ, Alarm I/O
Advanced Service
Up to 2.2M memory for Pre/Post alarm buffer
e-mail, FTP, alarm Buffer by event or schedule
IP notification, Alarm Notification to e-mail,
CGI Call by event or schedule
Built-in Motion detections Accuracy: 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
PTZ & UART Control
Support
PTZ and UART device control through serial interface Up to 35 PTZ
protocols from Pelco “P”& “D”protocol, Vicon V1311RB,
Samsung, Honeywell and Etc., X10 device control
Dial in/out via PSTN or GSM modem
Others Transmit Serial input data transfer with Video
IP notification by e-mail
Management Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser.
Developer support Provides HTTP CGI API
ActiveX control development kit
PWR Supply SMPS input: 100~240VAC, 300mA
Output: DC 12 Volt, 800mA
PWR Consumption DC 12Volt 500 mA

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
6
Operating Environment Temperature: 41°~ 122°F (5°~ 50°C)
Humidity: 20 ~ 80% RH(non-condensing)
Accessories
Console cable for system set up
Test LAN cable
CD for User Guide, Installation wizard
Quick Installation guide
Miscellaneous
Freely downloadable NDVR Software
AVI conversion tool support by FW-voyager.
Work with FW-Manager( NDVR S/W)
Dynamic IP support through AOIP
Users 32 simultaneous users
Installation, management
and maintenance
Installation CD and web-based configuration
Firmware upgrades over HTTP or FTP , firmware available at
www.flexwatch.com
Video access from Web
browser Video access from Web browser
Minimum Web browsing
requirements
Pentium III CPU 500 MHz or higher
Windows XP, 2000, NT4.0*,
Internet Explorer 6.x or later
System integration support
Powerful API for software integration available at
http://www.flexwatch.com, including Simple Viewer API, FlexWATCH
Control SDK, event trigger data in video stream, embedded scripting
and access to serial port peripherals over HTTP/TCP
User can be installed user program daemon for event notification or
sending image.
Embedded operating system: Linux 2.4
Supported protocols HTTP, TCP/IP, FTP, Telnet, RARP, PPP, PAP, CHAP, DHCP, SMTP
client(e- mail), NTP, Java
Applications FlexWATCH Manager 16/32/128/256 (not included)
Approvals FCC : Class A
CE : Class A
Dimensions (HxWxD) and
weight
Size :122 mm(L) x 84 mm(W)X 35 mm(H)
4.8 ”(L) x 3.3 ”(W)X 1.37”(H)
Weight : 310 g (0.68 lbs) without power supply.
Table 1 : FW-3150 Specification

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
7
1.4. FW-3150 Packing List
FW-3150’s packing box includes the following items.
FW-3150 1ea
Power Supply Unit
(Power Cable & SMPS DC12V 0.8A Adapter) 1ea
Direct Cable 1ea
CD (User’s Manual, installation wizard and Pictures) 1ea
Table 2 : FW-3150 Packing List
)Please check all the listed items are included in your package. For any missing items, please
contact your local distributor.

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
8
2. Hardware Description
2.1. FW-3150 Front Panel View
Picture 2 : FW-3150 Front Panel
A B C D E F G
Name Description
A Power Power input ports for DC 12V 0.8A [SMPS].
Use the original power supply unit from the package.
B Grounding Connector Grounding Connector
C Factory Default
Button
This button can reset the factory default settings at the system.
Especially when a user lost his/her admin-password, or when it got
any uncertain faulty operation.
- After reboot the system, wait until hearing two times of beep sound.
- Keep pressing FD button for 5~10 seconds until hearing three times
short beep sound. ACT LED blinks during the process. The system
will reboot automatically when it’s completed.
D LAN LAN Port for 10/100M Base T Auto sensing.
E COM RS-232 ports for Serial input device, Modem or
Console (Hyperterminal.connection).
F POWER LED Red light blinks when power is provided.
G LAN(Tx/Rx) LED Green light blinks when there is data transmission on the connected
LAN.
Table 3 : FW-3150 Front Panel Description

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
9
2.2. FW-3150 Rear Panel View
Picture 3 : FW-3150 Rear Panel View
A B C D E F G H
Name Description
A Video In BNC cable port for 1ch Video input.
B Video Out 1ch Video Outport port displaying on Analog Monitor
C RS485 RS-485 Ports for PTZ
D AUX RS-232 RS-232 Ports for PTZ, UART-Out/In.
E DC 12V Output 12V power relay ports for any external device connection. It must not
exceed 0.5A.
F DI (SENSOR) Signal input ports for sensor and contact.
G DO (ALARM) Signal output ports for alarm and light.
H MIC, SPK 1ch Audio Output and Input
Table 4 : FW-3150 Rear panel Description

FW3150 User’s Manual Part 1
4031 Seyeon Tech Co., Ltd
10
3. FW-3150 HW installation and basic setup
3.1. Before installation,
zRead carefully User’s Manual
zCheck-out if the power source is stable or not at the environment.
3.2. Factory Default Condition
The following table shows the factory default condition. Please refer to this when you need to change
the values on admin menu.
Factory Default Condition
Admin ID root
Admin password root
IP address 10.20.30.40
Network mask 255.255.255.0
Gateway 10.20.30.1
Table 5 : Factory Default Condition
)Factory default Admin ID and Password are all lower case letters. You can change the password
with Capital letters.
3.3. FW-3450 Hardware installation
Following steps show the physical installation process for FW-3150.
1. Install CCTV cameras at each required position.
2. Connect BNC cable between CCTV camera’s V-out and FW-3150’s V-in.
3. Connect a LAN cable at FW-3150 in your local network.
4. Connect the power cable at FW-3150.
After that, you need to follow the steps below.
zFirst, Network Configuration by FW-installer.
zSecond, Camera Configuration by FW-installer or admin-menu.
zThird, Service Configuration by FW-installer or admin-menu.
)For IP setup, refer to “Chapter 2.Network Configuration” on User’s Manual Part2.