Sharp E630U User manual

1
VL-E630U/T
VL-E680U
VL-E685U/T
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
originalconditionandonlypartsidenticaltothosespecified
be used.
Page
2. SPECIFICATIONS .............................................................................................................................. 2
4. DISASSEMBLY OF THE SET............................................................................................................. 3
5. MECHANISM ADJUSTMENT ............................................................................................................. 4
6. ADJUSTMENT OF VCR...................................................................................................................... 5
8. SCHEMATIC DIAGRAMS .................................................................................................................. 8
11.REPLACEMENT PARTS LIST.......................................................................................................... 29
12.PACKING OF THE SET .................................................................................................................... 35
SY8A5VL-E630U
CONTENTS
MODELS
SERVICE MANUAL
LIQUID CRYSTAL CAMCORDER 8 NTSC
VL-E630U/T
VL-E680U
VL-E685U/T
In this Service Manual, only the differences from VL-E610U/660U/665U
(S28L7VL-E610U) are described.
Therefore, for the parts which are not described in this Service Manual, refer
to the Service Manual for VL-E610U/660U/665U (S28L7VL-E610U) and its
supplement version (S38N9VL-E610U).
This document has been published to be used for
after sales service only.
Thecontentsaresubjecttochangewithoutnotice.
SHARP CORPORATION
VL-E630U/T
VL-E680U
VL-E685U/T
8 8MODELS VL-E630U/T/E680U/E685U/TLIQUID CRYSTAL CAMCORDER NTSC
SERVICE MANUAL

2
VL-E630U/T
VL-E680U
VL-E685U/T
Signal System: NTSC standard
Recording System: 2 rotary heads, helical scanning system
Cassette: 8 mm video tape, MP type
Recording/Playback Time: 120 minutes (P6-120)
Tape Speed: 14.345 mm/second
Pickup Device: 1/4" (6.4mm, effective size: 4.5 mm) CCD image sensor with approx.
270,000 pixels including optical black
Lens: 16 ×power zoom lens (F1.4, f=4.0-64.0 mm) and full-range auto focus
Lens Filter Diameter: 46 mm
Monitor: 3" (7.5 cm)—full-color LCD screen (TFT active matrix)
Microphone: Electret monaural microphone
Color Temperature Compensation: Auto white balance
Minimum Illumination: 0.8 lux (5 lux measured by EIA standard) (with gain-up, F1.4)
Video Output Level: 1.0 Vp-p 75-ohm unbalanced
Audio Output Level: –8 dBs, impedance less than 2.2 kohms
Speaker Output: 200 mW
Power Requirement: DC 3.6V
Power Consumption:
E630U:4.8W (during camera recording in full auto mode with zoom
motor off, and backlight in normal mode)
E680U/E685U:4.9W (during camera recording in full auto mode with
zoom motor off, Extend Zoom, DIS and Snapshot functions off, and
backlight in normal mode)
Operating Temperature: 0°C to + 40°C (32°F to 104°F)
Operating Humidity: 30% to 80%
Storage Temperature: –20°C to +60°C (–4°F to 140°F)
Dimensions (approx.): 7 5/32" (W) ×4 9/32" (H) ×3 7/8" (D)
[182 mm (W) ×109 mm (H) ×99 mm (D)]
Weight (approx.): 1.52lbs (690g)
(without battery pack, lithium battery, video cassette, and lens cap)
Battery Pack BT-H22
DC Output: 3.6V
Dimensions (approx.): 2 1/8" (W) ×3/4" (H) ×2 7/32" (D)
[54 mm (W) ×19 mm (H) ×
56 mm (D)]
Weight (approx.): 0.30 lbs (136 g)
AC Adapter/Battery Charger
UADP-0274TAZZ(VL-E630U/680U/685U)
UADP-0275TAZZ(VL-E630T/685T)
Power Requirement: AC 110-240 V, 50/60 Hz
DC Output: 4.5 V
Power Consumption: 16 W
Dimensions (approx.): 2 31/32" (W) ×2" (H) ×5 5/16" (D)
[75 mm (W) ×51 mm (H) ×
135 mm (D)]
Weight (approx.): 0.65 lbs (295 g)
2. SPECIFICATIONS
Specifications are subject to change without notice.
*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum illumina-
tion capability, lux ratings are comparable only between models from the same
manufacturer.
SERVICE INFORMATION (For the U.S.)
ForthelocationofthenearestSharpAuthorizedService,ortoobtainproductliterature,accessories,
supplies or customer assistance, please call 1-800-BE SHARP (1-800-237-4277) or visit SHARP's
web site (http://www.sharp-usa.com)

3
VL-E630U/T
VL-E680U
VL-E685U/T
4. DISASSEMBLY OFTHE SET
4-2. Disassembly of the VCR main body
1. Removal of the VCR lid shaft
(1)Remove one screw ((j)LX-HZ0063TAFC).
Area A
(j)
4-3. REPLACEMENT OF CCD SENSOR
4-3-1. BEFORE REPLACEMENT
1) The CCD image sensor is more sensitive to electrostatic breakage than C-MOS LSI. Therefore sufficient means to
prevent electrostatic damage must be taken when it is replaced.
•Ground the soldering iron.
•Ground also the human body, using the wrist strap(through an 1 Mohm resistor).
•Until the CCDsensor is mounted on the PWB, fit it to the conductive sponge, and short-circuit the foot lead.
2) Takeutmost care sothat the surfaceglass of CCD sensorand optical filterare not contaminatedand damaged. If any
contamination is found, for example fingerprint, wipe it off with silicon paper or clean chamois skin.
3) When replacing the CCD sensor, use the antistaic grounded soldring iron, and perform quickly soldering.
JAPAN
SHARP
Index Mark
LZ2413H5
YYWWXXX
17
14 8
4-4. INITIAL SETTING OF E2PROM IC
4-4-2. IC702 (E2PROM)
When the IC702 has been replaced, make the following settings and adjustments.
1. Remove the backup battery (CR2025)
2. Turn power switch to CAMERA
3. Setting up the V ADJ mode as follows.
* After press the CONTINUE key, press the VCR ADJ key on service remote control (RRMCG0033TASA).
E630U E680U E685U E630T E685T
address data data data data data
03 8D F8 FA 8C FE
0B 72 07 05 73 01
01 00 00 00 00 00
09 FF FF FF FF FF
04 00 00 00 00 00
0C FF FF FF FF FF
02 01 01 01 07 07
0A FE FE FE F8 F8
05 40 40
0D BF BF
4. After setting the above data, clear the V ADJ mode and turn off the power by pull out the battery pack or DC cable.
Neglect about 30 seconds after turned of power, because data of address becomes effective after microcomputer is
reset.
Now the setting of data is completion.
Adjustments to follow
Make the system controller servo, VCR, and LCD adjustments according to their respective instructions.

4
VL-E630U/T
VL-E680U
VL-E685U/T
5. MECHANISM ADJUSTMENT
5-2. Items and timings of inspection and maintenance
5-2-1. Inspection and maintenance list
Tape travelling route
(Refer to Section)
Drum (Refer to Section)
Remarks
Rollers
• Ifabnormalrotationor
deflection (signifi-
cant)isfound,replace
the roller.
Other than rollers
•Clean the tape con-
tactingareas.Besure
to use the specified
cleaning agent.
Possible symptom
encountered
•Lateral noise
•Unclean head
•Screen shaking
Usage time (hrs.)
500 1,000 1,500 2,000 3,000
Checking/Maintenance point
Tape travel system
•Improper S/N ratio
•No color appears.
Video head
Timing belt
Pinch roller
Capstan D.D. motor
Relay Pulle shaft
Pulle gear shaft
Drive gear shaft
•Tape does not run.
•Tape slackens.
•Screen shakes.
•Abnormal sound •Apply oil.
(Oil: )
•Replace if failure is
found.
★★★
∆∆∆
Driving system
∆∆∆
Loading motor •Replace if failure (ab-
normal sound) is de-
tected.
Abnormal sound
PB/VS-REWtake-uptorque
PB/VS-REW back tension
torque
Tu brake
•Not ejectable
• Thespecificmodecan-
not be set.
• If conformance to the
standard is not en-
sured, replace part.
★★★★★
★★★
★★★
★★★
★★★
Performance check
Note:
After oil is applied to
the drive gear shaft,
slightly wipe it off with
swab.
HC (Head Cleaner)
Oil:
Grease: MORYCOAT YM-103/X5-6020
Screw locking agent: THERE BOND 1401B
Cleaning liquid: Industrial-use ethyl alcohol
: Replace.
: Clean. ∆: Apply oil.
★: Check.
5-4. ADJUSTMENT OF MECHANISM TAPE TRAVEL SYSTEM
5-4-3. Adjusting the Si roller height
(2)Adjusting the Si roller
1 Playback the tape such to set the V/SR mode.

5
VL-E630U/T
VL-E680U
VL-E685U/T
6. ADJUSTMENT OF VCR
6-1. ADJUSTMENT OF VCR SECTION
6-1-5. Y/C circuit adjustment method
5. Adjustment of Y-FM deviation
Measuring instrument Oscilloscope
Mode REC/PB (self-playback/recording)
Input signal Color bar
Measuring point TL801
Adjustment address 34
Adjustment level 500 ±20 mVp-p
500±20mVp-p
3. Adjustment of playback Y level
Measuring instrument Oscilloscope
Mode PB
Playback signal Color bar (JiGWR5-5NSP)
Measuring point TL801
Adjustment address 27
Adjustment level 500 ±20 mVp-p
500±20mVp-p
Measuring point LCD panel display surface
Address 11, 12
Mode VCR AV input
Adjusting method Set the data of address 11 and 12.
Adjustment standard 11=BD
12=8E
Remarks ———————
6-1-7. Adjustment of LCD display circuit
9. Inverter input voltage setting
6-2. ADJUSTMENT OF CAMERA SECTION
• Connections for Camera Section Servicing
20pin SC2 19pin
SC6
20pin
SC4
CCD PWB
19pin
LENS SC3
15pin
17pin
Connect FPC
between the
camera and
the VCR.
SC2 19 pin
SC3 15 pin
SC4 17 pin
SC6 20 pin
QPWBH2814TAZZ
QPWBH2815TAZZ

6
VL-E630U/T
VL-E680U
VL-E685U/T
★Preparation for 6-2-2-3~6-2-2-9; set up the camera signal adjustment mode. (Write 00 to the address 1FE.)
6-2-2-3.
Before starting these adjustments, set up the auto focus adjust.
•Sync level adjustment
Measuring instrument Oscilloscope
Subject Anything
Tape —
Test point VIDEO OUT (Terminated in 75Ω)
Adjustment address 1FE
Adjustment level 286mVp-p
1) ConnecttheoscilloscopetotheVIDEO-OUT.Adjustthe
sync level to 286mVp-p.
1H
Video
SYNC
286mVp-p
6-2-2-9.
•Auto white balance adjustment
Measuring instrument
Subject Gray scale
Tape —
Test point VIDEO OUT (Terminated in 75 Ω)
Adjustment address R-OUT DOOR 016
B-OUT DOOR 018
Adjustment level R-OUT DOOR; 0 ±3 %
B-OUT DOOR; 0 ±3 %
Vector scope
1) Attach the color temperature conversion filter (JIGHOYA-LB165) to the front of the lens.
2) Using the addresses R-OUT DOOR 016 and B-OUT DOOR 018, adjust the spot to the center.
3) Take off the color temperature conversion filter.
★Write FF to the address 1FE to the address 1FE to exit the camera adjustment mode.
Center point
Spot
R-Y
B-Y

7
VL-E630U/T
VL-E680U
VL-E685U/T
- M E M O -

VL-E630U/T
VL-E680U
VL-E685U/T
VL-E630U/T
VL-E680U
VL-E685U/T
1234567891011 12 13 14 15 16 17 18 19 20
A
B
C
D
E
F
G
H
I
J
8~11
å
å
åAND SHADED COMPONENTS=SAFETY RELATED PARTS
8. SCHEMATIC DIAGRAM
8-2. POWER CIRCUIT SCHEMATIC DIAGRAM

12
A
B
C
D
E
F
G
H
1234567
VL-E630U/T
VL-E680U
VL-E685U/T
8-3. AUDIO CIRCUIT SCHEMATIC DIAGRAM

13
78910111213
VL-E630U/T
VL-E680U
VL-E685U/T
A
B
C
D
E
F
G
H
1234567
8-4. MOTOR DRIVER SCHEMATIC DIAGRAM

VL-E630U/T
VL-E680U
VL-E685U/T
VL-E630U/T
VL-E680U
VL-E685U/T
1234567891011 12 13 14 15 16 17 18 19 20
A
B
C
D
E
F
G
H
I
J
* See (S38N9VL-E610U) Page 8-23 When replacing the IC800
8-5. LCD DISPLAY CIRCUIT SCHEMATIC DIAGRAM
14~17

VL-E630U/T
VL-E680U
VL-E685U/T
VL-E630U/T
VL-E680U
VL-E685U/T
1234567891011 12 13 14 15 16 17 18 19 20
A
B
C
D
E
F
G
H
I
J
8-6. RF CIRCUIT SCHEMATIC DIAGRAM
18~19

VL-E630U/T
VL-E680U
VL-E685U/T
VL-E630U/T
VL-E680U
VL-E685U/T
1234567891011 12 13 14 15 16 17 18 19 20
A
B
C
D
E
F
G
H
I
J
8-7. SYSTEM CONTROL CIRCUIT SCHEMATIC DIAGRAM
20~23
*See(S38N9VL-E610U)Page8-24WhenreplacingtheIC703,705

VL-E630U/T
VL-E680U
VL-E685U/T
VL-E630U/T
VL-E680U
VL-E685U/T
1234567891011 12 13 14 15 16 17 18 19 20
A
B
C
D
E
F
G
H
I
J
8-9. Y/C CIRCUIT SCHEMATIC DIAGRAM
24~27
*See(S38N9VL-E610U)Page8-23WhenreplacingtheIC401

28
A
B
C
D
E
F
G
H
1234567
VL-E630U/T
VL-E680U
VL-E685U/T
8-10. D/A CIRCUIT SCHEMATIC DIAGRAM

Ref. No. Part No. ★Description Code Ref. No. Part No. ★Description Code
29
VL-E630U/T
VL-E680U
VL-E685U/T
R826 VRS-CZ1JF124D J 120k 1/16W Metal Oxide AA
R950 VRS-CZ1JF102J J 1k 1/16W Metal Oxide AA
R1820 VRS-CZ1JF393J J 39k 1/16W Metal Oxide AA
R1821 VRS-CZ1JF393J J 39k 1/16W Metal Oxide AA
R1901 VRS-CZ1JF103J J 10k 1/16W Metal Oxide AA
(VL-E630U/680U)
R1901 VRS-CZ1JF332J J 3.3k 1/16W Metal Oxide AA
(VL-E630T/685U/T)
R2781 VRS-CZ1JF103J J 10k 1/16W Metal Oxide AA
DUNTK2785QA00 CAMERA UNIT(VL-E630U)
DUNTK2785QA01 CAMERA UNIT(VL-E680U/685U)
INTEGRATED CIRCUITS
IC251 RH-iX0490TAZZ J IX0490TA BB
(VL-E680U/685U/T)
IC252 VHiMS548331-1 J MSM548331TS-K BD
(VL-E680U/685U/T)
IC501 RH-iX0590TAZZ J UPD784036GK515 AW
(VL-E630U)
IC501 RH-iX0589TAZZ J UPD784037GK513 AX
(VL-E680U/685U/T)
COIL AND TRANSFORMERS
L251 VPAXM100KR42N J Peaking 10µH 10% AC
(VL-E680U/685U/T)
L252 VPAXM100KR42N J Peaking 10µH 10% AC
(VL-E680U/685U/T)
CAPACITORS
C251 VCSATA0JJ156M J 15 6.3V Tantalum AC
(VL-E680U/685U/T)
C252 VCKYCZ1HF103Z J 0.01 50V Ceramic AB
(VL-E680U/685U/T)
C253 VCKYCZ1HF103Z J 0.01 50V Ceramic AB
(VL-E680U/685U/T)
C254 VCKYCZ1HF103Z J 0.01 50V Ceramic AB
(VL-E680U/685U/T)
C255 VCKYCZ1AF104Z J 0.1 10V Ceramic AB
(VL-E680U/685U/T)
C256 VCKYCZ1HF103Z J 0.01 50V Ceramic AB
(VL-E680U/685U/T)
C257 VCKYCZ1AF104Z J 0.1 10V Ceramic AB
(VL-E680U/685U/T)
C258 VCKYCZ1HF103Z J 0.01 50V Ceramic AB
(VL-E680U/685U/T)
C259 VCKYCZ1AF104Z J 0.1 10V Ceramic AB
(VL-E680U/685U/T)
C260 VCSATA0JJ156M J 15 6.3V Tantalum AC
(VL-E680U/685U/T)
C261 VCKYCZ1HF103Z J 0.01 50V Ceramic AB
(VL-E680U/685U/T)
RESISTORS
R252 VRS-CZ1JF000J J 0 1/16W Metal Oxide AA
(VL-E680U/685U/T)
R254 VRS-CZ1JF000J J 0 1/16W Metal Oxide AA
(VL-E680U/685U/T)
R256 VRS-CZ1JF000J J 0 1/16W Metal Oxide AA
(VL-E680U/685U/T)
R536 VRS-CZ1JF153J J 15k 1/16W Metal Oxide AA
R576 VRS-CZ1JF393J J 39k 1/16W Metal Oxide AA
R582 VRS-CZ1JF334D J 330k 1/16W Metal Oxide AA
R597 VRS-CZ1JF244D J 240k 1/16W Metal Oxide AA
11.REPLACEMENT PARTS LIST/
EXPLODEDVIEWS
ELECTRICAL PARTS LIST
Parts marked with " å " are important for maintaining the safety of the
set. Be sure to replace these parts with specified ones for maintaining
the safety and performance of the set.
Les pièces marquéss " å " sont importantes pour maintenir la sècurité
de l'appareil. Ne remplacer ces pieces que par des pièces dont le
numéro est spécifié pour maintenir la sécurité et protéger le bon
fonctinnement de l'appareil.
" HOW TO ORDER REPLACEMENT PARTS "
in USA: Contact your nearest SHARP Parts Distributor. For
location of SHARP Parts Distributor,
Call Toll-free 1-IBE800-SHARP
★MARK : SPARE PARTS-DELIVERY SECTION:ALL JAPAN
in CANADA: Contact SHARP Electronics of Canada Limited
Phone [phone].
To have your order filled promptly and correctly, please furnish
the following informations.
1. MODEL NUMBER 2. REF. NO.
3. PART NO. 4. DESCRIPTION
5. PRICE CODE
åMARK: SAFETY RELATED PARTS
åPIECES: RELATIVES A LA SECURITE
PWB ASSEMBLY IS NOT REPLACEMENT ITEM
L'ASSEMBLANGE P.C.I. EST UN ARTICLE NON REMPLACABLE
Ref. No. Part No. ★Description Code
PRINTED WIRING BOARD ASSEMBLIES
(NOT REPLACEMENT ITEM)
DUNTK2782QA14 J VCR Unit(VL-E630U) —
DUNTK2782QA12 J VCR Unit(VL-E680U) —
DUNTK2782QA13 J VCR Unit(VL-E685U) —
DUNTK2782QA15 J VCR Unit(VL-E630T) —
DUNTK2782QA16 J VCR Unit(VL-E685T) —
DUNTK2785QA00 J CAMERA Unit(VL-E630U/T)—
DUNTK2785QA01 J CAMERA Unit —
(VL-E680U/685U/T)
DUNTK2782QA14 VCR UNIT(VL-E630U)
DUNTK2782QA12 VCR UNIT(VL-E680U)
DUNTK2782QA13 VCR UNIT(VL-E685U)
DUNTK2782QA15 VCR UNIT(VL-E630T)
DUNTK2782QA16 VCR UNIT(VL-E685T)
INTEGRATED CIRCUITS
IC703 RH-iX0609TAZZ J CXP87460-126R AY
IC705 RH-iX0612TAZZ J IX0612TA AR
IC904 VHiNJM2904M-1 J NJM2904M AE
TRANSISTORS
Q415 VS2PA1774R/-1 J Transistor AB
Q602 VSRT1N441U/-1 J Transistor AB
CAPACITORS
C638 VCKYCY1CB104K J 0.1 16V Ceramic AB
C1912 VCKYTV1CB474K J 0.47 16V Ceramic AC
RESISTORS
R447 VRS-CZ1JF122J J 1.2k 1/16W Metal Oxide AA
R454 VRS-CZ1JF102D J 1k 1/16W Metal Oxide AA
R455 VRS-CZ1JF102D J 1k 1/16W Metal Oxide AA
R719 VRS-CZ1JF822J J 8.2k 1/16W Metal Oxide AA
Note :
In this chapter, only the differences from VL-E610U/
660U/665U are described. Therefore, for the parts which
arenotdescribedinthispage,refertotheServiceManual
for VL-E610U/660U/665U (S28L7VL-E610U) chapter 11.

Ref. No. Part No. ★Description Code Ref. No. Part No. ★Description Code
30
VL-E630U/T
VL-E680U
VL-E685U/T
A
B
C
D
E
F
G
H
123456
362
375
354
356
200 200
203
351
346
201
319
345
350
351
209
211 314 213
359
324
325
328
209 368
204
204
348
202
349
362
354
355
208
369 313
363
208 202
214
312
310
202
209 209 215
318
332 316
311
304
209
370
364
333
302
214
303
301
214
309
323
322
209 315 317
214
327
307 308
208
209
209
365
306
208
341
376
343
330
212
357
329
336
206
344
339
338
337
214
358
206
209
209 209
342
209
209
372
334
335
214
300
353
352
214 361
360
331
366
207
214
340
305
205
209
367
374
326
321
208
208
214
209
216
216
204
MECHANISM CHASSIS EXPLODED VIEW

Ref. No. Part No. ★Description Code Ref. No. Part No. ★Description Code
31
VL-E630U/T
VL-E680U
VL-E685U/T
374 TLABH0196TAZZ J Caution Label AB
375 PSHEM0014GEZZ J Counter Balance AC
376 PSHEP0013GEZZ J Interruption Sheet AC
200 XAPSF17P03200 J Screw M1.7x3.2 AA
201 LX-XZ3036GEFP J Screw M2.0x6.0 AD
202 LX-BZ3175GEFN J Screw M1.7x4.0 AC
203 LX-BZ3163GEFN J Screw M1.7x2.5 AC
204 LX-HZ3074GEFN J Screw M1.7x5.3 S Tight AA
205 LX-BZ3177GEFF J Screw M1.4x1.5 AB
206 LX-BZ3132GEFF J Screw M1.4x1.5xD3.5 AA
207 LX-BZ3178GEZZ J Screw M1.4x1.5xD4.0 AD
208 LX-HZ3083GEFF J Screw M1.4x2.5 S Tight AB
209 LX-HZ3077GEFN J Screw M1.4x3.0 S Tight AA
211 LX-HZ3084GEFF J Screw M1.4x4.0 S Tight AC
212 LX-HZ3116GEFD J Screw M1.4x3.2 S Tight AB
213 LX-NZ3053GEZZ J Screw M1.4 Nut AC
214 LX-WZ1076GE02 J Washer D0.8xD3.0x0.2t AA
Plastics
215 LX-WZ1075GE02 J Washer D2.1xD5.0x0.25t AA
Plastics
216 XWHJZ12-02040 J Washer D1.2xD4.0x0.25t AC
Plastics
300 LCHSM0163GEZZ J Main Chassis Ass'y AW
301 NGERH1280GEZZ J Main Cam AD
302 NGERH1281GEZZ J Sub-Cam AD
303 MLEVF0470GEFW J Eject Lever AD
304 MLEVF0492GEFW J M Function Lever AF
305 LHLDZ1966GEZZ J L Block Holder AD
306 NGERW1064GEZZJ Worm Pulley AC
307 NGERW1065GEZZJ Worm AD
308 NGERH1282GEZZ J Worm Wheel AC
309 NGERH1283GEZZ J Lo Relay Gear AC
310 MARMM0126GEZZJ S Lo Arm Ass'y AF
311 MARMM0128GEZZJ T Lo Arm Ass'y AG
312 LANGA0069GEFW J S Lo Arm Retainer AD
313 PGiDM0146GEZZ J Sup Rail AD
314 PGiDM0171GEZZ J Tu Rail AD
315 NGERH1284GEZZ J Sup Lo Gear AC
316 NGERH1285GEZZ J Tu Lo Gear AC
317 MSPRD0167GEZZ J S Lo Arm Double-Acting AE
Spring
318 MSPRT0407GEZZ J T Lo Arm Double-Acting AC
Spring
319 MLEVP0310GEZZ J HC Lever Ass'y AF
321 MSLiF0074GEFW J Ten Arm Operation Lever AD
322 PGiDM0148GEZZ J Ten Arm Guide AC
323 NGERH3045GEFWJ Segment Gear AD
324 MLEVF0472GEZZ J Tu Guide Ass'y AC
325 PGiDP0027GEZZ J Tu Guide AE
326 MSPRC0183GEZZ J Tu Guide Spring AA
327 MSPRC0184GEZZ J Si Roller Spring AA
328 MSPRC0208GEZZ J Tu Guide Lever Spring AC
329 CCHSS0049GE01 J Slide Chassis Ass'y
330 MLEVF0495GEZZ J Ten Arm Ass'y AC
331 LBNDK3023GEZZ J Ten Band Ass'y AF
332 NiDR-0016GEZZ J Swing Gear Ass'y AF
333 NGERH1286GEZZ J Driving Gear AC
334 NGERH1287GEZZ J Pulley Gear AD
335 NPLYV0157GEZZ J Relay Pulley AD
336 MLEVP0284GEZZ J S Brake AC
337 NGERH1288GEZZ J Tu Brake Gear AC
338 MLEVP0285GEZZ J Tu Main Brake AC
339 MLEVP0286GEZZ J Tu Sub-Brake AC
340 MSPRD0169GEZZ J Tu Brake Spring AD
341 LHLDZ2053GEZZ J Light Guide Holder Ass'y AF
342 LANGG9102GEFWJ Down Guide AF
343 MSPRT0408GEZZ J Tension Spring AD
344 MSPRD0170GEZZ J S Brake Spring AD
345 CDRMU0032GE01 J Upper Drum Ass'y BE
346 PGiDM0154GEZZ J Tape Guide AB
348 QBRSK0039GEZZ J Earth Spring AD
349 PGiDM0143GEZZ J Drum Base AG
350 DDRML0020HE01 J Lower Drum Ass'y AY
351 RMOTP1137GEZZ J Drum Motor AS
352 PSPAQ0010GEZZ J Gap Adjusting Shim AC
353 NRTR-0096GEZZ J R Tr Rotor Ass'y AP
354 MSPRC0209GEZZ J Gr Adjusting Spring AC
355 LPOLM0058GEZZ J S Pole Base AK
356 LPOLM0059GEZZ J T Pole Base AK
357 NDAiV1071GEZZ J Sup Reel Support AG
358 NDAiV1072GEZZ J Tu Reel Support AG
359 MLEVF0517GEZZ J Pinch Lever Ass'y AS
360 NBLTT0012GEZZ J Timing Belt S AE
361 NBLTT0013GEZZ J Timing Belt L AE
362 NROLP0108GEZZ J Guide Roller Ass'y AG
363 NROLP0109GEZZ J Si Roller Ass'y AH
364 QPWBH5428GEZZJ Mode FPC AK
365 CPWBN5402GE01 J Sensor Ass'y BC
366 QSW-M0042GEZZ J Recognition SW AH
367 RDTCH0037GEZZ J Dew Sensor AF
368 RMOTV1019GEZZ J Cap. Motor AZ
369 RMOTM1075GEZZJ Load. Motor AL
370 QSW-R0038GEZZ J Mode SW AG
372 RAMP-0017TAN0 J H/A PWB AY
MECHANISM PARTS
—— End of Mechanism Parts ——
OTHER PARTS
SUPPLIED ACCESSORIES
TiNSE0310TAZZ J Operation Manual
(VL-E630U)
TiNSE0311TAZZ J Operation Manual
(VL-E680U)
TiNSE0312TAZZ J Operation Manual
(VL-E685U)
TiNS-6011TAZZ J Operation Manual
(VL-E630T)
TiNS-6012TAZZ J Operation Manual
(VL-E685T)
UBATL0011TAZZ J Lithium Battery —
UBATM0010TAZZ J Battery BC
(VL-E630U/680U/685U)
UBATM0011TAZZ J Battery BC
(VL-E630T/685T)
UBATU0023GEZZ J AA DRYCELL Battery x 2 —
RRMCG0072TASA J Remote Control AP
UADP-0274TAZZ J AC Adapter —
(VL-E630U/680U/685U)
UADP-0275TAZZ J AC Adapter —
(VL-E630T/685T)
PACKING PARTS (NOT REPLACEMENT ITEM)
SPAKC7390TAZZ J Packing Case(VL-E680U) —
SPAKC7380TAZZ J Packing Case(VL-E630U) —
SPAKC7394TAZZ J Packing Case(VL-E685U) —
SPAKC7384TAZZ J Packing Case(VL-E630T) —
SPAKC7395TAZZ J Packing Case(VL-E685T) —

Ref. No. Part No. ★Description Code Ref. No. Part No. ★Description Code
32
VL-E630U/T
VL-E680U
VL-E685U/T
A
B
C
D
E
F
G
H
123456
CABINET EXPLODED VIEW
c
3-2
a
3
33
a
b
c
b
26
27
28
29
30
31
4-2
5-6
5-4
5-2
5-5 5-3
1-3
1-2
1-4
32
a
a
4
6-16
6-15
6-10
6-12
6-13
6-11
6-14
6-2
6-3
6-4 6-5
6-6 6-7
7-4
7-3 2-5 2-4
2-3
2-2
2-6
7-2
7-5
6-9
6-8 6-9
h
h
7b
b
22
b
b
b
d
f
ffi
20
19
13
24
i
i
15
2
14 b
b
8
A
11
9
10
12
52
51
50
17
e
b
1
46
b
45
43
40
b
41
42
e
48
47
c
49
c
39
5
j
c
c
35
36
37
38
54 34
d
d
e
23
db
6
d
b
21
55
b
b
b
25
18
53
16
g
b
44

Ref. No. Part No. ★Description Code Ref. No. Part No. ★Description Code
33
VL-E630U/T
VL-E680U
VL-E685U/T
7-2 PSPAZ0190TAZZ J Tilt Spacer AE
7-3 GCOVA1537TAKA J Tilt Frame V AL
7-4 PSPAZ0189TAZZ J Rotation Spacer AD
7-5 LANGH0071TAFW J Stopper Fitting AD
8 LHLDZ1446TAZZ J LCD Holder AG
A PSHEP0044TAZZ J Reflection Polarizing Sheet AG
9 PSHEP0045TAZZ J Diffusion Sheet AD
10 PSHEP0044TAZZ J Prism Sheet AG
11 PGiDM0025TAZZ J Light Guide Plate AG
12 PMiR-0021TAZZ J Reflection Sheet AC
å13 CLMPV0043TA02 J Lamp Inverter Unit
14 CPNLC0032RM01 J LCD Panel BZ
15 PZETV0343TAZZ J LCD Glass Retaining AA
16 TLABM1909TAZZ J Model Label(VL-E630U) AC
16 TLABM1920TAZZ J Model Label(VL-E680U) AC
16 TLABM1924TAZZ J Model Label(VL-E685U) AC
16 TLABM1913TAZZ J Model Label(VL-E630T) AC
16 TLABM1925TAZZ J Model Label(VL-E685T) AC
17 TLABN0171TAZZ J Serial No. Label(VL-E630U) AC
17 TLABN0172TAZZ J Serial No. Label(VL-E680U) AC
17 TLABN0173TAZZ J Serial No. Label(VL-E685U) AC
18 CLNSA0127TA01 J Lens Unit BS
19 GFTAC1241TASA J Cassette Compartment AD
Cover
20 DUNTK2782QA14 J VCR Unit(VL-E630U) —
20 DUNTK2782QA12 J VCR Unit(VL-E680U) —
20 DUNTK2782QA13 J VCR Unit(VL-E685U) —
20 DUNTK2782QA15 J VCR Unit(VL-E630T) —
20 DUNTK2782QA16 J VCR Unit(VL-E685T) —
21 DUNTK2785QA00 J CAMERA Unit(VL-E630U/T) —
21 DUNTK2785QA01 J CAMERA Unit —
(VL-E680U/685U/T)
22 QPWBH2814TAZZ J Tilt FPC AQ
23 LHLDW1038TA00 J FPC Holder AC
24 QSW-Z0286TAZZ J VCR Operation Unit AR
(VL-E630U/680U/685U)
24 QSW-Z0300TAZZ J VCR Operation Unit AU
(VL-E630T/685T)
25 QTANZ0129TAZZ J Battery Terminal Unit AG
26 QSW-Z0285TAZZ J Power Unit AR
27 LHLDZ1452TAZZ J Power Lock Holder AC
28 MSPRC0083TAFJ J Power Lock Spring AA
29 JBTN-0277TASA J Power Button AD
(VL-E630U/630T)
29 JBTN-0277TASB J Power Button AF
(VL-E680U/685U/685T)
30 LHLDZ1451TAZZ J Power Holder AC
31 JKNBP0152TASA J Power Knob AD
32 JKNBP0153TASA J Zoom Knob(VL-E630U/T) AD
32 JKNBP0153TASB J Zoom Knob AF
(VL-E680U/685U/T)
33 LHLDZ1453TASA J Zoom Knob Holder AD
34 JKNBP0154TASA J Open Knob AC
35 PSPAZ0191TAZZ J Spacer AA
36 RMiCC0079TAZZ J Microphone AM
37 MSPRT0034TAFJ J Lid Lock Spring AC
38 LHLDZ1454TA00 J VCR Lid Lock AD
39 NSFTZ0084TAFW J VCR Lid Shaft AD
40 PSPAZ0192TAZZ J Microphone Lead Spacer AD
41 LHLDZ1450TAZZ J Speaker Holder AC
42 VSP0020P-94WN J Speaker AL
43 PSPAG0103TAZZ J Speaker Spacer AC
44 PCOVP9062TAZZ J Speaker Mesh AB
45 PSPAG0095TAZZ J VCR Lid Cushion AA
46 GCOVA3056TAKA J Speaker Cover AE
47 ZTAPEZ800020E J Tape —
48 QSW-Z0284TAZZ J Turn/Eject SW AH
49 MLEVP0031TAZZ J Eject Lever AC
50 LANGK0399TAFW J Tripod Angle Ass’y AK
51 PSHEP0074TAZZ J Microphone Lead Sheet AB
52 QJAKZ0071TAZZ J Jack Unit
53 PSPAG0084TA00 J Front Group Frame AD
Rubber
54 GCOVA3057TAKA J Microphone Cover AG
55 QPWBH2815TAZZ J CCD FPC AE
1 DCABA6183TAK1 J V Frame Service AL
(VL-E630U/680U/685U)
1 DCABA6183TAK2 J V Frame Service
(VL-E630T/685T)
1-2 PSPAG0095TAZZ J VCR Lid Cushion AA
1-3 TLABH0326TAZZ J Lithium Exchange Label AB
(Only VL-E630T/685T)
1-4 LHLDB1027TAZZ J Lithium Holder AD
2 DCABB6183TAK5 J L Cabinet Service AS
(VL-E630U/680U/685U)
2 DCABB6183TAK6 J L Cabinet Service
(VL-E630T/685T)
2-2 QEARP0233TAZZ J LCD Earth Sheet AE
2-3 TLABH0318TAZZ J Facing Recording Caution AB
Label
2-4 GCOVH1226TASA J Jack Cover AD
2-5 GCOVA1535TAZZ J Remote Control Receptor AD
Cover
2-6 ZTAPEZ800020E J Tape —
3 CCABC6090TAK2 J Camera Front Cabinet AT
Ass’y(VL-E630U/T)
3 CCABC6091TAK4 J Camera Front Cabinet
Ass’y(VL-E680U/685U/T)
3-2 GCOVA1539TASB J Lens Hood AK
4 DCABD6090TAK2 J Camera Back Cabinet AQ
Ass’y(VL-E630U)
4 DCABD6088TAK4 J Camera Back Cabinet AS
Ass’y(VL-E680U/685U)
4 DCABD6093TAK2 J Camera Back Cabinet
Ass’y(VL-E630T)
4 DCABD6094TAK2 J Camera Back Cabinet
Ass’y(VL-E685T)
4-2 JBTN-0276TASA J Camera Button AD
(VL-E630U)
4-2 JBTN-0276TASB J Camera Button AF
(VL-E680U/685U)
4-2 JBTN-0277TASA J Camera Button(VL-E630T) AD
4-2 JBTN-0277TASB J Camera Button(VL-E685T) AF
5 DFTAC1271TAK1 J VCR Lid Service AU
(VL-E630U/T)
5 DFTAC1272TAK1 J VCR Lid Service(VL-E680U)
5 DFTAC1273TAK1 J VCR Lid Service
(VL-E685U/T)
5-2 HBDGS0059TASB J LCD Badge AE
5-3 LANGK0428TAFW J VCR Lid Reinforcing Angle AG
5-4 LANGK0400TAFW J Eject Fitting AD
5-5 PSPAZ0193TAZZ J VCR Lid Sheet AC
5-6 MSPRD0047TAFJ J VCR Lid Spring AD
6 CCOVA1536TAK5 J KS Side Cover AU
(VL-E630U/680U/685U)
6 CCOVA1536TAK8 J KS Side Cover(VL-E630T/685T)
6-2 NSFTZ0049TAFW J Battery Lid Axle AC
6-3 MSPRD0050TAFJ J Battery Lid Spring AC
6-4 TLABH0264TAZZ J Recycle Label AB
6-5 GFTAB1066TAKA J Battery Lid AE
6-6 HDECP0045TASA J Battery Decoration Plate AC
(VL-E630U/680U/685U)
6-6 HDECP0047TASA J Battery Decoration Plate AC
(VL-E630T/685T)
6-7 LHLDZ1448TA00 J Battery Intermediate Lock AC
6-8 MSPRC0103TAFJ J Battery Intermediate Lock AD
Spring
6-9 MSPRC0102TAFJ J Battery Lock Lever Spring AA
6-10 MLEVP0030TASA J Battery Lid Open/Close AC
Lever
6-11 LHLDZ1449TAZZ J Battery Lock Holder AC
6-12 MLEVP0029TASA J Battery Lock Lever AC
6-13 MSPRC0101TAFJ J Battery Push-out Spring AD
6-14 LHLDZ1445TAZZ J Lens Holder AD
6-15 LANGK0398TA00 J Battery Lid Angle Fitting AH
6-16 UBNDT0122TAZZ J Hand Strap
7 DCOVA1538TAK1 J Tilt Ass’y AU
CABINET PARTS LIST