Sharper Image SI711 User manual

Hot+Cold
Beverage
Holder for Car
& Desktop
SI711 Instructions
Read and save these instructions.

Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
This item was created by Sharper Image Design, our company’s own
product deve opment group. P ease accept my persona assurance of your
comp ete satisfaction with this product’s qua ity and performance. We offer
generous return privi eges and exce ent warranties on a our products.
For more than 25 years, The Sharper Image has shared the fun of
discovering innovative products that make ife better and more enjoy-
ab e. We’ve been in business a ong time because we are an exciting
p ace to shop and — just as important y — we strive to de iver great
customer service that exceeds your expectations.
Enjoy your purchase!
Respectfu y,
Richard Tha heimer
Founder, Chairman and Chief Executive Officer
Ca 1-800-344-4444 for 24-7 ordering and customer service,
or go to , our comp ete on ine store.

•The Hot+Cold Beverage Holder is designed for short-term use
only. The temperature is not regulated. (Cools to approximately
68 degrees below the ambient temperature.)
•Do not store unopened cans in this product. If accidentally
switched to HOT, cans may explode from sustained heat.
•Do not place or immerse in water or other liquid.
•Only use this product with the provided power cords.
•Never operate this product if it has a damaged cord or adapter,
is not working properly, or has been dropped or damaged.
•To prevent accumulated frozen condensation, do not operate
this product in COLD mode for prolonged periods while
empty.
•Condensation may occur, especially when used during wet and
cool days.
Warning

To use the Hot+Cold Beverage Holder at home or in the office,
plug one end of the included AC adapter into the Adapter Jack,
then plug the other end into a standard 120V outlet.
For automotive use, plug one end of the included DC adapter
into the Adapter Jack, then plug the other end into a 12V
vehicle accessory jack.
DC Adapter AC Adapter
Beverage Holder Operation
Adapter Jack

When power is switched on, the blue LED on the rear of the
unit illuminates.
Warning: The 12V DC adapter may not fit all vehicles. Ensure
that the plug fits securely into the vehicle’s accessory jack with-
out being forced. If the fit is not correct, discontinue use.
To select HOT or COLD mode, press the respective button on the
unit’s control panel. A blue LED illuminates for COLD mode; a
red LED illuminates for HOT mode.
Note: The included travel mug is recommended for use with hot
beverages; other containers may become overheated.
Beverage Holder Operation

What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for one year from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described in the
product instruction manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible,
The Sharper Image will either replace this product with one of similar features and price, or refund the full
purchase price of the product, whichever you prefer.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department
2901-A West 60th Street
Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or
by email at [email protected].
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
Copyright 2003
Sharper Image Corporation
650 Davis St., San Francisco, CA 94111
[phone]
Shop online:
Due to continuing improvements, actual product may differ slightly from the product described herein.
V1 09/03
One-Year Warranty