Shop fox SHOP FOX W1760 User manual
This heavy-duty welded steel parts washer has a 20 gallon
work-space volume, but is designed to hold a maximum of
10 gallons of liquid. Do not overfill.
Specifications
• Overall Size ........................ 30" L x 21" W x 35" H
• Tub Depth ........................................ 10" Deep
• Maximum Liquid Level .......... 10-Gallons or 5" Deep
• Minimum Liquid Level ............ 6-Gallons or 3" Deep
• Nozzle Diameter ....................................5.5mm
• Pump Motor ...................... 110V, 0.7 Amp, 60 Hz
• Pump Output ....................................... 50 GPM
• Net Weight ..........................................57 lbs.
Inventory (Figure 1) Qty
Parts Bin ..........................................................1
Pump Box ........................................................1
Work Table. ......................................................1
Tub. ...............................................................1
Shelf ..............................................................1
Pump Box ........................................................1
Leg ...............................................................4
Bolt Bag ..........................................................1
—Phillips Head Screw M6-1 X 12 (Legs) .............. 25
—Hex Nut M6-1 (Legs) .................................. 25
—Lock Washer 6mm (Legs) ............................. 25
—Phillips Head Screw M4-.7 X 10 (Switch Box) .......2
—Hex Nut M4-.7 (Switch Box) ...........................2
—Lock Washer 4mm (Switch Box) .......................2
COPYRIGHT © NOVEMBER, 2007 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China
#10087CR
Model W1760
20 Gallon Parts Washer
Instructions
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
Figure 1. Assembly diagram.
Shelf
Tub
Legs
Work
Table
Pump Box
Parts
Bin
Drain
Plug
Introduction
-2-
W1760 20-Gallon Parts Washer
Figure 2. Pump and switch box support
flange.
Switch
Box
Support
Flange
Tub Wall Lip
Choosing Your Cleaning Solution
Not every cleaning solution is safe to use in your parts
washer. NEVER USE GASOLINE, KEROSENE, FUELS,
STRIPPERS, OR ACIDS OF ANY KIND IN THIS PARTS
WASHER. Due to the changing formulas of cleaning solu-
tions, and changing laws and regulations, we cannot rec-
ommend a solution for you. Some solutions can be highly
flammable and may damage pump and motor seals.
If you are in doubt about any aspect of your selected
solution, contact the solution manufacturer, or refer to
the Materials Safety Data Sheet (MSDS) information, which
can be found on the internet. It is your responsibility to
select a safe solution.
To assemble the parts washer, do these steps:
1. Layout the parts and use Figure 1 to inventory
them.
2. Using a #2 screwdriver and a 10mm wrench, secure
the legs to the storage shelf with eight M6-1 x 12
screws, lock washers, and hex nuts.
3. With the help of an assistant, place the tub onto
the legs and secure it in place with the remaining 16
screws, lock washers, and hex nuts.
4. Use a 19mm wrench to install the spout and tube
onto the pump outlet (Figure 1).
5. Using a #2 screwdriver and a 7mm wrench, loosely
mount the switch box to the side of the pump box
with the two M4-.7 X 10 Phillips head screws, lock
washers, and hex nuts.
6. Hang the switch box so the tub wall lip slips under
the switch box support flange as shown in Figure 2.
7. Use a #2 screwdriver and a 7mm wrench, tighten the
switch box mounting screws.
8. Place the work table and parts bin into the tub.
9. Use a 13mm wrench to make sure the tank drain
plug is tight, and after filling, make sure the plug
does not leak.
Assembly
-3-
W1760 20-Gallon Parts Washer
• POWER SUPPLY. This machine requires a grounded
110V power supply circuit that is rated for a 15A.
• PREVENTING ELECTRICAL SHOCK. Only connect this
parts washer to a properly grounded GFCI (Ground
Fault Circuit Interrupt) receptacle. Test the GFCI
receptacle operation according to switch manufac-
turer recommended intervals.
• GROUND PRONG. Never cut off the ground prong
from the power cord in order to plug the parts wash-
er power cord into an non-grounded wall receptacle
or extension cord.
• PREVENTING FIRE. Do not fill this parts washer with
gasoline, kerosene, fuel, or flammable solvents. Do
not disconnect or modify the automatic lid closure
device in any way. Keep an appropriate class fire
extinguisher close at hand.
• SAFE USAGE. Never smoke, use a drop light, or any
other hand-held ignition source or electrical device
near the parts washer. An ignition source or electri-
cal device that falls into the cleaning solution can
cause severe burns or electrocution.
• PERSONAL PROTECTION. To prevent personal con-
tamination, always wear gloves, goggles, an apron,
and a respirator when using or changing the parts
washer liquid. Wash your hands with soap and water
after every use.
• LOCATION. Make sure that the parts washer is locat-
ed in an area with adequate ventilation to prevent a
buildup of vapors, and always keep the parts washer
away from all sources of ignition.
• SAFE STORAGE. Keep away from children and ani-
mals. Close the lid when not using the parts washer.
• MAINTENANCE. Clean or replace tank filter before
it becomes clogged, and inspect for leaks. Follow
OSHA, EPA, and the manufacturer's solution replace-
ment schedules and disposal regulations.
USE this parts washer with caution and
respect. Always consider safety first,
as it applies to your individual working
conditions. No list of safety guidelines
can be complete—every shop environ-
ment is different. Failure to follow
safety guidelines could result in serious
personal injury or death.
This parts washer is designed to store
cleaning solutions. During storage some
liquids can grow dangerous microbes,
or due to the collection of toxic metal
and contaminants from the items being
washed, the fluid can become a very
poisonous solution to humans and
animals.
USE the correct personal protection
equipment when handling sharp
workpieces to prevent cuts, infections,
and poisoning.
FOLLOW OSHA, EPA, and the fluid
manufacturer's requirements to
properly dispose of cleaning liquids
when it becomes time to change the
liquid.
BIOLOGICAL and POISON
HAZARD!
Operating Voltage Amp Draw Min. Circuit Size Plug/Recommended Plug Extension Cord
110V Operation 0.7 Amps 15A, GFCI NEMA 5-15 16 Gauge
Electrical Specifications
Operation Safety
-4-
W1760 20-Gallon Parts Washer
-5-
W1760 20-Gallon Parts Washer
21
REF PART�# DESCRIPTION REF PART�# DESCRIPTION
1 X1760001 PARTS�BIN 21 X1760021 COMPLETE�PUMP�BOX�W/ELECTRICAL
2 X1760002 LID 22 X1760022 WATER�SHOCK�LABEL
3 X1760003 FLEX�HOSE�W/NOZZLE 23 X1760023 PUMP�BOX
4 X1760004 COTTER�PIN�1.5�X�16 24 X1760024 PUMP�BOX�COVER
5 XPW02M FLAT�WASHER�5MM 25 X1760025 FILTER�RETAINER�COVER
6 X1760006 CLEVIS�PIN�5�X�30 26 X1760026 FIBER�FILTER
7 X1760007 CLEVIS�PIN�5�X�20 27 X1760027 OUTPUT�PIPE�W/ELBOW
8 X1760008 FIRE�FUSE�LINK�ASSEMBLY 28 X1760028 ELBOW�SUPPORT�BRACKET
10 X1760010 DATA�LABEL 29 X1760029 SWITCH�BOX�W/SWITCH
11 X1760011 TUB 30 X1760030 SOLVENT�PUMP�110V
12 X1760012 WORK�TABLE 31 X1760031 POWER�CORD�110V
13 XPS14M PHLP�HD�SCR�M6-1�X�12 32 X1760032 GROMMET
14 XPLW03M LOCK�WASHER�6MM 33 XPORP021 O-RING�20.8�X�2.4�P21
15 XPN01M HEX�NUT�M6-1 34 X1760034 OUTPUT�TUBE
16 X1760016 SHELF 35 XPORP015 O-RING�14.8�X�2.4�P15
17 X1760017 RUBBER�WASHER 36 XPS38M PHLP�HD�SCR�M4-.7�X�10
18 X1760018 DRAIN�PLUG 37 XPW05M FLAT�WASHER�4MM
19 X1760019 LEG 38 XPN04M HEX�NUT�M4-.7
20 X1760020 COMBO�WARNING�LABEL
Parts
-6-
W1760 20-Gallon Parts Washer
REF PART�# DESCRIPTION REF PART�# DESCRIPTION
100 X1760100 EYE�SKIN�HAZARD�LABEL 104 XLABEL-04S ELECTRICITY�WARNING�LABEL
101 X1760101 FLAMMABLE�WARNING�LABEL 105 XLABEL-08H READ�MANUAL�LABEL
102 X1760102 RUBBER�GLOVES�WARNING�LABEL 106 X1760106 GFCI�WARNING�LABEL
103 X1760103 SHOP�FOX�LABEL 107 X1760107 DATA�LABEL
100
101
102
104
103
107
105
106
Label Placement
-7-
W1760 20-Gallon Parts Washer
This manual suits for next models
1
Table of contents
Other Shop fox Washer manuals
