SHOPPINGALL SA-D29 User manual

WARNING STATEMENTS PARTS INCLUDED
13" - 32"(33-81cm) .
8kg(17.6lbs) max.
H I
J
(x4)
(x1)
M6x15(x3)
M4x8 (x8) M4x12 (x8) M4x30 (x8)
12X5.8X16 (x8) (x1)
S=4mm (x1) S=5mm
A
B
C
D
G
F
E
(x2)
(x1)
M6x70(x2)
Monitor Desk mount
SA-D29
Product Information
UP
UP
Thank you for choosing our product. ShoppingAll is
dedicated to providing the highest level of quality and
service to our customers. If you are satisfied with the item,
would you kindly share your feedback on Amazon?
Please do not hesitate to contact us if you have any issue.
Call: [phone]
Mon-Fri 8:00am – 9:00pm (Eastern Time) (Canada/USA)
Email: [email protected]
Website: www.ShoppingAll.com
Warning
Prior to the installation of this product, the
installation instruction must be read and
completely understood.
Failure to do so may result in personal
injury, property damage or voiding of
manufacturer warranty.
Do not install on a structure that is prone to
vibration, or movement. Reinforce the
structure as required before installation.
Pay attention to the weight capacity of the
mount. Exceeding the limitation can result
in impairment or serious injury and property
damage.
Never operate the mount if parts are
missing or damaged. Contact your local
service center for warranty service.
Do not use this product for any purpose or
in any configuration not explicitly specified
in this instruction. We hereby disclaim any
and all liability for injury or damage arising
from incorrect assembly, Incorrect
mounting, or incorrect use of this product.
Recommended mounting surfaces: Wooden
studs or solid-flat concrete. If the mount is to
be installed on any surface other than wooden
studs, use suitable hardware.

1
OR
1
3
4
INSTALLATION
2
5
A
X
TVTV TV TV
C-D
Desktop
Clamp Installation Arm Installation Tilt & Swivel Adjustment
Cable Management Installation
Monitor Installation
Grommet Installation
S=5mm
M6x70
M6x15
Desk
Desk
S=5mm
E
G
F
B
NOTE: If space is still not
enough for clamp, remove
clamp screw and attachment
entirely and reattach clamp
screw with attachment
upside-down.
Please make sure that the
adjustment bolt is facing upwards.
S=5mm
S=4mm
E
E
F
S=4mm
S=4mm
S=4mm
S=4mm
OR
3
A
B
S=4mm
M6x15
360°
360°
UP
UP
Use the cable clip to
manage the wrenches
when not used.
S=4mm
S=5mm
S=5mm
S=5mm
S=5mm
VESA Tilt Adjustment
Tighten the bolt to secure the arm in place
VESA Swivel Adjustment