Showdown Displays Show 'N' Fold User manual

Congratulations on the purchase of your
Show ‘N’ Fold™.
Owner’s Manual
Includes:
Parts List
Assembly Instructions
Disassembly Instructions
Storage Instructions
Care Instructions
Warranty Information
Please read all of the information carefully and
contact your distributor or supplier with any issues.
6' Show ‘N’ Fold™ Display & Graphic Header Item # 147007
Parts List
Assembly Instructions
Important: Before you begin please count
and inspect all pieces.
1� Panel Display (A)
1� Header Display (B)
1� Header Graphic (C)
2� Header Connector (D)
1� Soft Carry Case (E)
(A)
(B)
(E)
(D)
(C)
Step 2
Unfold side panels to approximately 30º angles and set on tabletop.
Step 3
Line up the connector (D) with the groove on the edge of the center panel (A). Push down until the
connector is sitting on top of the panel (A). Repeat on the other side of the center panel.
Step 1
Lay header (B) at on table. Place header graphic (C) Velcro™ side down, on Velcro™ receptive header
(B) of the display.

Care Instructions
Warranty Information
All products are designed to provide the user with a cost�effective and durable product. Standard warranty is a ‘one year parts and labor’
warranty which warrants product against defects in material and workmanship. It does not cover damage due to accidents, abuse, or normal
wear and tear. Products found to be defective will be replaced or repaired at factory’s discretion.
Spot clean with a damp cloth.
Storage Instructions
Step 1
Remove header (B) and connectors (D) from display (A). Fold display (A) together in Z-shaped pattern,
and lay it at.
Disassembly Instructions
Step 4
Line up the groove on the edge of the header (B) with both connectors (D). Slide
header (B) down until it rests on top of the center panel (A).
Assembly Instructions (cont.)
Place and store all components in soft carry case (E) and store in a cool dry place.