ShowPro PLUTO 800 User manual

PLUTO 800
USER MANUAL
PLUTO 800
LEDMOV525

1
338.2
96.4
185.1
260.3
225.3
173
Electrical
Voltage:AC100~240V，50/60Hz◆
Max Power:140W◆
Size:338x260x185mm◆
Weight:6.2kg◆
1 PRODUCT SPECIFICATIONS
1.1 PRODUCT SPECIFICATIONS
1.2 PRODUCT FEATURES

21 2
11
16
21
12
17
13
18
14
19
10
15
20
RED 1
GREEN1
BLUE1
White1
RED2
GREEN2
BLUE2
White 2
RED3
GREEN3
BLUE3
White3
1.3 SAFETY WARNING
IMPORTANT：
●This product must be installed by a qualified professional.
●All maintenance must be carried out by a qualified electrician.
●A minimum distance of 0.5m must be maintained between the equipment
and a combustible surface.
●The product must always be operated in a well ventilated area.
●DO NOT stare directly into the LED light source.
●Always disconnect the power before carrying out any maintenance.
●The earth must always be connected to the ground.
●Ensure that all parts of the equipment are kept clean and free of dust.
CHANNEL FUNCTIONVALUE

320
1
2
3
4
5
6
PAN
PAN FINE
TILT
TILT FINE
PT SPEED
DIMMER
9
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
7
8
179
STROBE
NO FUNCTION
STROBE FROM （SLOD TO FAST ，0-25Hz）
NO FUNCTION
THUNDER STROBE FROM SLOD TO FAST
NO FUNCTION
RANDOM SROBE
ZOOM
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
Clamp
Safety cable
Bracket
2.1 MOUNTING：
2 INSTALLATION
●The fixture can be mounted in any position.
●Always ensure that mounting surface can withstand 10 times the weight of the
fixture.
●Always use a safety cable when mounting the fixture in any elevated position.
CHANNEL FUNCTIONVALUE

4
19
2700k
magenta magenta
2700k
blue blue
2700k
cyan cyan
2700k
green green
2700k
yellow yellow
2700k
orange orange
2700k
red red
5600k
red red
5600k
orange orange
5600k
yellow yellow
5600k
green green
5600k
cyan cyan
5600k
blue blue
5600k
magenta magenta
5600k
red red
2700k
red red
STATIC 1 STATIC 2 STATIC 3 STATIC 4
STATIC 5 STATIC 6 STATIC ALL RING1
RING2 RED-2700K ORANGE-2700K YELLOW-2700K
GREEN-2700K CYAN-2700K BLUE-2700K MAGENTA-2700K
RED-2700k RED-5600K ORANGE-5600K YELLOW-5600K
GREEN-5600K CYAN-5600K BLUE-5600K
MAGENTA-5600K
RED-5600K
2.2 FUSE REPLACEMENT
SAFTY CAP
FUSE
●Remove the safety cap by a screwdriver.
etch the old fuse from safety cap.●F
nstall a new fuse.●I
nstall the safety cap.●I
●220~240V: 14 units may be connected in series
●110~120V: 7 units may be connected in series
2.3 POWER CONNECTIONS
Note:
If the signal cable is over 60m between the DMX512 controller and fixture
or beween two fixtures, then a DMX signal amplifier is needed as well.
1
3
2
2.4 Connect main controller with several fixtures
Termination plug
3pin XLR (male)
As image , terminate the link by installing a 120 Ohm
resistor in the output socket of the last fixture.
When connect main controller with several fixtures , please
Terminate the link by installing a termination plug in the output socket of the last fixture.
The termination plug, which is a male XLR plug with a 120 Ohm, 0.25 Watt resistor
soldered between pins 2 and 3, soaks up the control signal so it does not reflect and
cause interference.
Pixel effect function
After reset , the fixture head direction is the position of 1-3 LED chips

518
11
MAGENTA-2700K
RED-2700k
RED-5600K
ORANGE-5600K
YELLOW-5600K
GREEN-5600K
CYAN-5600K
BLUE-5600K
MAGENTA-5600K
RED-5600K
15
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
13
14
179
STROBE
NO FUNCTION
STROBE FROM （SLOD TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
AUTO SPEED SLOW TO FAST
12
3.1 DISPLAY OPERATION
3.2 MENU MAP
3 DISPLAY PANEL OPERATION
CHANNEL FUNCTIONVALUE
DOWN
ENTER
UP
MENU
◆MENU： ；BACK
ENTER OR SAVE◆ENTER： ；
◆DOWN： ；DOWN
◆UP： ；UP
(Start display screen when press 3 seconds)
OFF
FULL POWER CCT
3200K
4200K
5600K
10000K
NORMAL
MENU
ADDRESS
HSIC
PERSON
001-512
PERSON1
PERSON2
FANS
PERFORM
SLOW
NORMAL
FAST
AUTO
BLACKOUT
OFF
ON
DIMMER
DIM4
DIM3
DIM2
DIM1
OFF
CMY
PAN/TILT
PAN INVERT
NORMAL
INVERT
TITL INVERT
NORMAL
INVERT
PT SPEED
FAST
SLOW
COLOR
UC
RGBtoW
PIXEL
PT RANGE
P.START
P.END
T.START
T.END
USE
0-255
0-255
0-255
0-255
NO
YES
PWM
1200Hz X FINE ±99
2000Hz Y FINE ±99
2400Hz
6000Hz
25000Hz
DMX ERROR
SAVE
BLACK

6
17
1
2
3
4
5
6
PAN
PAN FINE
TITL
TITL FINE
PT SPEED
CYAN
MAGENT
YELLOW
DIMMER
7
8
9
10
11
MARCOS
NO FUNCTION
static 1
static 2
static 3
static 4
static 5
static 6
static ALL
RING1 (CLOCKWISE )
RING2 (ANTI-CLOCKWISE)
RED-2700k
ORANGE-2700K
YELLOW-2700K
GREEN-2700K
CYAN-2700K
BLUE-2700K
A SINGLE POINT
NO FUNCTION
CYAN 100% / MAGENTA UP / YELLOW 0%
CYAN DOWN / MAGENTA 100% / YELLOW 0%
CYAN 0% / MAGENTA 100% / YELLOW UP
CYAN 0% / MAGENTA DOWN / YELLOW 100%
CYAN UP / MAGENTA 0% / YELLOW 100%
CYAN 100% /MAGENTA 0%/YELLOW DOWN
CYAN 100%/MAGENTA UP/YELLOW 0%
NO FUNCTION
2700K
3200K
4200K
5600K
6500K
8000K
CHANNEL FUNCTIONVALUE
INFO
SYSTEM ERROR
TEMPERATURE
VERSION
V01
STAND ALONE
RUN
DMX512
ARTNET
ARTNET2DMX
AUTO1
AUTO2
CUSTOM
TEST
SLAVE
NETWORK PARA
RDM UID
LABEL
0X388Axxxxxxxx
PLUTO 800XE
EDIT
PAN
TITL
RED
GREEN
BLUE
WHITE
DIMMER
STROBE
TIME
USE
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-25
0-255
YES
ZOOM
0-255
STEP(01-50)
NO
SETTING
WDMX
SETTINGS LOCK
OFF
ON
SERVECE LOCK
OFF
ON
RECOVERY *****
WDMXHIDE
XY OFFSET
YES
YES
NO
NO
WDMX POWER
OFF
ON
NETWORK
NET SWITCH
OFF
ON
IP MODE
DEFAUL IP
CUSTOM IP
XX.XX.XX.XX
ADDR XXX
UNIVERS
WDMX RESET
YES
NO
UPLOAD
LOAD PARA
LOAD EDIT
YES
NO
YES
NO
CUSTOM IP SET
DMX RESET
DMX
DISPLAY
DISPLAY ON
SHORT
LONG
DISPLAY LOCK
OFF
ON
YES/NO
YES/NO
MANUAL
ALL RESET
YES
PT RESET
NO
YES
NO
SENSORHIDE
YES
NO

7
16
17
static ALL
RING1 顺时针
RING2逆时针
RED-2700k
ORANGE-2700K
YELLOW-2700K
GREEN-2700K
CYAN-2700K
BLUE-2700K
MAGENTA-2700K
RED-2700k
RED-5600K
ORANGE-5600K
YELLOW-5600K
GREEN-5600K
CYAN-5600K
BLUE-5600K
MAGENTA-5600K
RED-5600K
21
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
19
20
179
STROBE
NO FUNCTION
STROBE FROM （SLOW TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
AUTO SPEED SLOW TO FAST
18
MENU
HSIC
PERSON
PERSON1
PERSON2
CMY
PIXEL
●Enter the【PERSON】mode to select DMX mode:【 】HSIC ,
【 】 【 】 【 】 【PIXEL】PERSON1 ,PERSON2 ,CMY , ,
3.4 PERSONALITY
ADDRESS
001-512
MENU
3.3 DMX512 SETTINGS
●Enter the【DMX】mode to set the DMX ADDRESS.
3.5 PERFORM
CHANNEL FUNCTIONVALUE
SERVICE
CCT
2700K
4200K
5600K
6500K
8000K
3200K
CALIB.P/T PAN
TILT
±99
±99
DIMMER
X FINE
Y FINE
0-255
±99
±99
MENU
OFF
FANS
PERFORM
SLOW
NORMAL
FAST
AUTO
BLACKOUT
OFF
ON
DIMMER
DIM4
DIM3
DIM2
DIM1
OFF
PAN/TILT
PAN INVERT
NORMAL
INVERT
TITL INVERT
NORMAL
INVERT
PT SPEED
FAST
SLOW
COLOR
UC
RGBtoW
PT RANGE
P.START
P.END
T.START
T.END
USE
0-255
0-255
0-255
0-255
NO
YES

15
8
1
2
3
4
5
6
7
16
MARCOS
NO FUNCTION
RED 100% / GREEN UP / BLUE 0%
RED DOWN / GREEN 100% / BLUE 0%
RED 0% / GREEN 100% / BLUE UP
RED 0% / GREEN DOWN / BLUE 100%
RED UP / GREEN 0% / BLUE 100%
RED 100% /GREEN 0%/BLUE DOWN
RED 100%/GREEN UP/BLUE UP
RED DOWN/GREEN DOWN/BLUE 100%
ALL LED AT FULL OUTPUT
2700K
3200K
4200K
5600K
6500K
8000K
17
8
9
10
11
12
13
14
PAN
PAN FINE
TITL
TITL FINE
PT SPEED
RED
RED FINE
GREEN
GREEN FINE
BLUE
BLUE FINE
WHTIE
WHTIE FINE
DIMMER
DIMMER FINE
15
NO FUNCTION
static 1
static 2
A SINGLE POINT
static 3
static 4
static 5
static 6
CHANNEL FUNCTIONVALUE
FULL POWER CCT
3200K
4200K
5600K
10000K
NORMAL
PWM
1200Hz X FINE ±99
2000Hz Y FINE ±99
2400Hz
6000Hz
25000Hz
SETTING
SETTINGS LOCK
OFF
ON
SERVECE LOCK
OFF
ON
RECOVERY *****
WDMXHIDE
XY OFFSET
YES
YES
NO
NO
NETWORK
NET SWITCH
OFF
ON
IP MODE
DEFAUL IP
CUSTOM IP
XX.XX.XX.XX
ADDR XXX
UNIVERS
WDMX
WDMX POWER
OFF
ON
WDMX RESET
YES
NO
UPLOAD
LOAD PARA
LOAD EDIT
YES
NO
YES
NO
CUSTOM IP SET
DMX ERROR
SAVE
BLACK
DMX RESET
DMX
DISPLAY
DISPLAY ON
SHORT
LONG
DISPLAY LOCK
OFF
ON
YES/NO
YES/NO
●【FANS】menu, select【Slow/Norm/Fast/Auto】as required fan speed.
●【PAN INVERT】menu, select 【NORM/INVERT】for normal/inverted control of
the PAN function
●【TILT INVERT】menu, select 【NORM/INVERT】for normal/inverted control of
the TILT function
●【PT SPEED】menu, select 【Slow/Fast】as required PAN/TILT movement
speed.
●【BLACKD】menu, select 【OFF】for immediate activation of PAN/TILT
blackout when selected using the control channel or 【ON】 for 3 second delay
before activation.
●【DIMMER】 menu for selection of 【DIM1/DIM2/DIM3/DIM4/OFF】 special
dimming curves
SENSORHIDE
YES
NO

9
914
MAGENTA-2700K
RED-2700k
RED-5600K
ORANGE-5600K
YELLOW-5600K
GREEN-5600K
CYAN-5600K
BLUE-5600K
MAGENTA-5600K
RED-5600K
13
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
11
12
179
STROBE
NO FUNCTION
STROBE FROM （SLOW TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
AUTO SPEED SLOW TO FAST
10
●Enter the【STAND ALONE】menu to select from
【DMX512/ARTNET/ARTNET2DMX/AUTO 1/AUTO 2/CUSTOM/TEST/SLAVE】
run modes
MENU
STAND ALONE
RUN
DMX512
ARTNET
ARTNET2DMX
AUTO1
AUTO2
CUSTOM
TEST
SLAVE
3.6 RUN
●【SETTING】is a protect bottom,【 SETTINGS LOCK】is the menu lock bottom, choose
【OFF】means the menu lock bottom is off, choose 【ON】means the menu lock bottom
is on【RECOVERY】is the recover to default value.Press 【ENTER】to password setting,
press correct password 【UP+DOWN+UP+DOWN】,and press 【ENTER】,if password
is correct, display will show 【OK】,
●【WDMXHIDE】wireless is the hidden setting,select【NO】as nothidden, select【YES】
as hidden
●【SENSORHIDE】is the hidden settings of XY correction function, select【NO】as not
hidden, select【YES】as hidden,The default setting is 【YES】.
●【XY OFFSET】is the setting to hide the fine adjustment of the refresh frequency, select
【NO】as not hidden, select【YES】as hidden,The default setting is【YES】;
●【NET SWTCH】is net switch, OFF adhere to 2.XX.XX.XX , ON adhere to 2.XX.XX.XX,
【IP MODE】 is IP mode setting, "DEFAULT IP" is default IP, CUSTOM IP is user IP,
【CUSTOM IP SET】is customer IP setting, 【UNIVERS】is data bulk setting, output series
0-255
●【WDMX】setting , choose 【WDMX POWER】to turn on/off the DMX , choose 【OFF】
to turn off it . 【ON】to turn on it . Choose 【 WDMX RESET】to reset the DMX , choose
【NO】, then DMX will not reset , 【YES】, then DMX will reset
CHANNEL FUNCTIONVALUE
●【DMXERROR】menu, select 【SAVE】to maintain last command in case of DMX
error or 【BLACK】for blackout
●【DMXRESET】menu, select 【DMX】to allow remote reset using DMX controller or
【DISPLAY】for reset only available at on-fixture display
●【DISPLAY ON】menu, select 【LONG/SHORT/ 】for length of time forDISPLAY LOCK
display backlight
●【UPLOAD】upload data setting, choose 【LOAD PARA】to upload data, choose【NO】
means do not upload data choose【YES】means upload data, choose 【LOAD EDIT】
to program, choose 【NO】means do not upload, choose 【YES】means upload
●<PWM_RATE> is PWM reflesh rate bottom, press UP/DOWN to choose <1200Hz>、
<2000Hz>、<2400Hz>、<6000Hz>、<25000Hz>
【 】 [ ]●COLOR is for activate/unactivate the color calibration functions. When RGBtoW
is selected, on RGB = 255,255,255, the color is displayed as calibratedin
Service -- RGBtoW. When COLOR is set OFF , on RGB = 255,255,255, the[ ] [ ]
RGBvalues are not adjusted and the output is most powerful.When [UC] is selected,
the RGB output are adjusted to a standard preset universal color which balances
fixtures from different generations.

MANUAL
ALL RESET
NO
YES
PT RESET
NO
YES
MENU
3.8 INFO
3.9 MANUAL
●Select【RESET】from the【MANUAL】menu
●【ALL RESET】menu, select【YES/NO】to carry out full fixture reset
●【PT RESET】menu, select【YES/NO】to carry out PAN/TILT reset
3.10 SERVICE
●push 【OK】button into the information search mode in menu 【INFO】, push
【up/down】to choose item.
Choose 【SYSTEM ERROR】system data error .
Choose 【TEMPERATURE】LED working temperature
Choose 【 VERSION】 software version
Choose 【NETWORK PARA】check network specification
Choose 【RDM】check the fixture ID
Choose 【LABEL】check model name
10
1
2
3
4
5
PAN
TITL
RED
GREEN
BLUE
WHITE
DIMMER
6
7
8
MARCOS
NO FUNCTION
RED 100% / GREEN UP / BLUE 0%
RED DOWN / GREEN 100% / BLUE 0%
RED 0% / GREEN 100% / BLUE UP
RED 0% / GREEN DOWN / BLUE 100%
RED UP / GREEN 0% / BLUE 100%
RED 100% /GREEN 0%/BLUE DOWN
RED 100%/GREEN UP/BLUE UP
RED DOWN/GREEN DOWN/BLUE 100%
ALL LED AT FULL OUTPUT
2700K
3200K
4200K
5600K
6500K
8000K
9
NO FUNCTION
static 1
static 2
static 3
static 4
static 5
static 6
static ALL
RING1 (CLOCKWISE )
RING2 (ANTI-CLOCKWISE)
RED-2700k
ORANGE-2700K
YELLOW-2700K
GREEN-2700K
CYAN-2700K
BLUE-2700K
13
A SINGLE POINT
MENU
INFO
SYSTEM ERROR
TEMPERATURE
VERSION
V01
NETWORK PARA
RDM UID
LABEL
0X388Axxxxxxxx
PLUTO 800XE
CHANNEL FUNCTIONVALUE
●Enter the【 EDIT 】mode to edit the custom programs by adjusting the
value of【PAN】 ,【TILT】 ,【RED】,【GREEN】,【BLUE】,【WHITE】,
【DIMMER】,【STROBE】,【ZOOM】,【 TIME】
● 【 USE】 【YES】Enter and select to run the steps user need.
STROBE
TIME
USE
0-25
0-255
YES
ZOOM
0-255
NO
MENU
EDIT
PAN
TITL
RED
GREEN
BLUE
WHITE
DIMMER
0-255
0-255
0-255
0-255
0-255
0-255
0-255
STEP(01-50)
SERVICE
CCT
2700K
4200K
5600K
6500K
8000K
3200K
CALIB.P/T PAN
TILT
±99
±99
DIMMER
X FINE
Y FINE
0-255
±99
±99
MENU
3.7 EDIT
●【 】 【 】Press ENTER to enter the CCT color temperature adjustment,then press
DOWN/UPkey to select the value of color temperature under the full power
【 】,【 】 【 】,【 】 【 】 【 】2700K 3200K ,4200K 5600K ,6500K ,8000K ,you can press
【 】 【 】 【 】DOWN or UPto select DIMMER or X FINE or Y FINE ,then select the
value 0-255 or ±99 if you need to adjust the color temperature.【 】 【 】

11
HSI C
13
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
12
● Note: This product have four DMX512 channel configuration:
【HSIC】,【PERSON1】,【PERSON2】,【CMY】,【PIXEL】.
4.1 CHANNEL ASSIGNMENT
4 USING A DMX512 CONTROLLER
CHANNEL FUNCTIONVALUE
CHANNEL FUNCTIONVALUE
1
2
3
4
11
5
PAN
PAN FINE
TITL
TITL FINE
PT SPEED
INTENSIYT
HUE
HUE FINE
SATURATION
10
CCT
NO FUNCTION
2700K
3200K
4200K
5600K
6500K
8000K
12
179
STROBE
NO FUNCTION
STROBE FROM （SLOW TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
6
7
8
9
●Press【ENTER】 to enter 【CALIB.P/T】to do the color temperature reset setting,
then select 【PAN】or【TILT】,select the value【±99】.

11
HSI C
13
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
12
● Note: This product have four DMX512 channel configuration:
【HSIC】,【PERSON1】,【PERSON2】,【CMY】,【PIXEL】.
4.1 CHANNEL ASSIGNMENT
4 USING A DMX512 CONTROLLER
CHANNEL FUNCTIONVALUE
CHANNEL FUNCTIONVALUE
1
2
3
4
11
5
PAN
PAN FINE
TITL
TITL FINE
PT SPEED
INTENSIYT
HUE
HUE FINE
SATURATION
10
CCT
NO FUNCTION
2700K
3200K
4200K
5600K
6500K
8000K
12
179
STROBE
NO FUNCTION
STROBE FROM （SLOW TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
6
7
8
9
●Press【ENTER】 to enter 【CALIB.P/T】to do the color temperature reset setting,
then select 【PAN】or【TILT】,select the value【±99】.

MANUAL
ALL RESET
NO
YES
PT RESET
NO
YES
MENU
3.8 INFO
3.9 MANUAL
●Select【RESET】from the【MANUAL】menu
●【ALL RESET】menu, select【YES/NO】to carry out full fixture reset
●【PT RESET】menu, select【YES/NO】to carry out PAN/TILT reset
3.10 SERVICE
● push 【OK】button into the information search mode in menu 【INFO】, push
【up/down】to choose item.
Choose 【SYSTEM ERROR】system data error .
Choose 【TEMPERATURE】LED working temperature
Choose 【 VERSION】 software version
Choose 【NETWORK PARA】check network specification
Choose 【RDM】check the fixture ID
Choose 【LABEL】check model name
10
1
2
3
4
5
PAN
TITL
RED
GREEN
BLUE
WHITE
DIMMER
6
7
8
MARCOS
NO FUNCTION
RED 100% / GREEN UP / BLUE 0%
RED DOWN / GREEN 100% / BLUE 0%
RED 0% / GREEN 100% / BLUE UP
RED 0% / GREEN DOWN / BLUE 100%
RED UP / GREEN 0% / BLUE 100%
RED 100% /GREEN 0%/BLUE DOWN
RED 100%/GREEN UP/BLUE UP
RED DOWN/GREEN DOWN/BLUE 100%
ALL LED AT FULL OUTPUT
2700K
3200K
4200K
5600K
6500K
8000K
9
NO FUNCTION
static 1
static 2
static 3
static 4
static 5
static 6
static ALL
RING1 (CLOCKWISE )
RING2 (ANTI-CLOCKWISE)
RED-2700k
ORANGE-2700K
YELLOW-2700K
GREEN-2700K
CYAN-2700K
BLUE-2700K
13
A SINGLE POINT
MENU
INFO
SYSTEM ERROR
TEMPERATURE
VERSION
V01
NETWORK PARA
RDM UID
LABEL
0X388Axxxxxxxx
PLUTO 800XE
CHANNEL FUNCTIONVALUE
● Enter the【 EDIT 】mode to edit the custom programs by adjusting the
value of【PAN】 ,【TILT】 ,【RED】,【GREEN】,【BLUE】,【WHITE】,
【DIMMER】,【STROBE】,【ZOOM】,【 TIME】
● 【 USE】 【YES】Enter and select to run the steps user need.
STROBE
TIME
USE
0-25
0-255
YES
ZOOM
0-255
NO
MENU
EDIT
PAN
TITL
RED
GREEN
BLUE
WHITE
DIMMER
0-255
0-255
0-255
0-255
0-255
0-255
0-255
STEP(01-50)
SERVICE
CCT
2700K
4200K
5600K
6500K
8000K
3200K
CALIB.P/T PAN
TILT
±99
±99
DIMMER
X FINE
Y FINE
0-255
±99
±99
MENU
3.7 EDIT
●【 】 【 】Press ENTER to enter the CCT color temperature adjustment,then press
DOWN/UPkey to select the value of color temperature under the full power
【 】,【 】 【 】,【 】 【 】 【 】2700K 3200K ,4200K 5600K ,6500K ,8000K ,you can press
【 】 【 】 【 】DOWN or UPto select DIMMER or X FINE or Y FINE ,then select the
value 0-255 or ±99 if you need to adjust the color temperature. 【 】 【 】

9
914
MAGENTA-2700K
RED-2700k
RED-5600K
ORANGE-5600K
YELLOW-5600K
GREEN-5600K
CYAN-5600K
BLUE-5600K
MAGENTA-5600K
RED-5600K
13
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
11
12
179
STROBE
NO FUNCTION
STROBE FROM （SLOW TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
AUTO SPEED SLOW TO FAST
10
●Enter the【STAND ALONE】menu to select from
【DMX512/ARTNET/ARTNET2DMX/AUTO 1/AUTO 2/CUSTOM/TEST/SLAVE】
run modes
MENU
STAND ALONE
RUN
DMX512
ARTNET
ARTNET2DMX
AUTO1
AUTO2
CUSTOM
TEST
SLAVE
3.6 RUN
●【SETTING】is a protect bottom,【 SETTINGS LOCK】is the menu lock bottom, choose
【OFF】means the menu lock bottom is off, choose 【ON】means the menu lock bottom
is on【RECOVERY】is the recover to default value.Press 【ENTER】to password setting,
press correct password 【UP+DOWN+UP+DOWN】,and press 【ENTER】,if password
is correct, display will show 【OK】,
●【WDMXHIDE】wireless is the hidden setting,select【NO】as nothidden, select【YES】
as hidden
●【SENSORHIDE】is the hidden settings of XY correction function, select【NO】as not
hidden, select【YES】as hidden,The default setting is 【YES】.
●【XY OFFSET】is the setting to hide the fine adjustment of the refresh frequency, select
【NO】as not hidden, select【YES】as hidden,The default setting is【YES】;
●【NET SWTCH】is net switch, OFF adhere to 2.XX.XX.XX , ON adhere to 2.XX.XX.XX,
【IP MODE】 is IP mode setting, "DEFAULT IP" is default IP, CUSTOM IP is user IP,
【CUSTOM IP SET】is customer IP setting, 【UNIVERS】is data bulk setting, output series
0-255
●【WDMX】setting , choose 【WDMX POWER】to turn on/off the DMX , choose 【OFF】
to turn off it . 【ON】to turn on it . Choose 【 WDMX RESET】to reset the DMX , choose
【NO】, then DMX will not reset , 【YES】, then DMX will reset
CHANNEL FUNCTIONVALUE
●【DMXERROR】menu, select 【SAVE】to maintain last command in case of DMX
error or 【BLACK】for blackout
●【DMXRESET】menu, select 【DMX】to allow remote reset using DMX controller or
【DISPLAY】for reset only available at on-fixture display
●【DISPLAY ON】menu, select 【LONG/SHORT/ 】for length of time for DISPLAY LOCK
display backlight
●【UPLOAD】upload data setting, choose 【LOAD PARA】to upload data, choose【NO】
means do not upload data choose【YES】means upload data, choose 【LOAD EDIT】
to program, choose 【NO】means do not upload, choose 【YES】means upload
●<PWM_RATE> is PWM reflesh rate bottom, press UP/DOWN to choose <1200Hz>、
<2000Hz>、<2400Hz>、<6000Hz>、<25000Hz>
【 】 [ ] ●COLOR is for activate/unactivate the color calibration functions. When RGBtoW
is selected, on RGB = 255,255,255, the color is displayed as calibratedin
Service -- RGBtoW. When COLOR is set OFF , on RGB = 255,255,255, the [ ] [ ]
RGBvalues are not adjusted and the output is most powerful.When [UC] is selected,
the RGB output are adjusted to a standard preset universal color which balances
fixtures from different generations.

15
8
1
2
3
4
5
6
7
16
MARCOS
NO FUNCTION
RED 100% / GREEN UP / BLUE 0%
RED DOWN / GREEN 100% / BLUE 0%
RED 0% / GREEN 100% / BLUE UP
RED 0% / GREEN DOWN / BLUE 100%
RED UP / GREEN 0% / BLUE 100%
RED 100% /GREEN 0%/BLUE DOWN
RED 100%/GREEN UP/BLUE UP
RED DOWN/GREEN DOWN/BLUE 100%
ALL LED AT FULL OUTPUT
2700K
3200K
4200K
5600K
6500K
8000K
17
8
9
10
11
12
13
14
PAN
PAN FINE
TITL
TITL FINE
PT SPEED
RED
RED FINE
GREEN
GREEN FINE
BLUE
BLUE FINE
WHTIE
WHTIE FINE
DIMMER
DIMMER FINE
15
NO FUNCTION
static 1
static 2
A SINGLE POINT
static 3
static 4
static 5
static 6
CHANNEL FUNCTIONVALUE
FULL POWER CCT
3200K
4200K
5600K
10000K
NORMAL
PWM
1200Hz X FINE ±99
2000Hz Y FINE ±99
2400Hz
6000Hz
25000Hz
SETTING
SETTINGS LOCK
OFF
ON
SERVECE LOCK
OFF
ON
RECOVERY *****
WDMXHIDE
XY OFFSET
YES
YES
NO
NO
NETWORK
NET SWITCH
OFF
ON
IP MODE
DEFAUL IP
CUSTOM IP
XX.XX.XX.XX
ADDR XXX
UNIVERS
WDMX
WDMX POWER
OFF
ON
WDMX RESET
YES
NO
UPLOAD
LOAD PARA
LOAD EDIT
YES
NO
YES
NO
CUSTOM IP SET
DMX ERROR
SAVE
BLACK
DMX RESET
DMX
DISPLAY
DISPLAY ON
SHORT
LONG
DISPLAY LOCK
OFF
ON
YES/NO
YES/NO
●【FANS】menu, select【Slow/Norm/Fast/Auto】as required fan speed.
●【PAN INVERT】menu, select 【NORM/INVERT】for normal/inverted control of
the PAN function
●【TILT INVERT】menu, select 【NORM/INVERT】for normal/inverted control of
the TILT function
●【PT SPEED】menu, select 【Slow/Fast】as required PAN/TILT movement
speed.
●【BLACKD】menu, select 【OFF】for immediate activation of PAN/TILT
blackout when selected using the control channel or 【ON】 for 3 second delay
before activation.
●【DIMMER】 menu for selection of 【DIM1/DIM2/DIM3/DIM4/OFF】 special
dimming curves
SENSORHIDE
YES
NO

7
16
17
static ALL
RING1 顺时针
RING2逆时针
RED-2700k
ORANGE-2700K
YELLOW-2700K
GREEN-2700K
CYAN-2700K
BLUE-2700K
MAGENTA-2700K
RED-2700k
RED-5600K
ORANGE-5600K
YELLOW-5600K
GREEN-5600K
CYAN-5600K
BLUE-5600K
MAGENTA-5600K
RED-5600K
21
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
19
20
179
STROBE
NO FUNCTION
STROBE FROM （SLOW TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
AUTO SPEED SLOW TO FAST
18
MENU
HSIC
PERSON
PERSON1
PERSON2
CMY
PIXEL
● Enter the【PERSON】mode to select DMX mode:【 】HSIC ,
【 】 【 】 【 】 【PIXEL】PERSON1 ,PERSON2 ,CMY , ,
3.4 PERSONALITY
ADDRESS
001-512
MENU
3.3 DMX512 SETTINGS
● Enter the【DMX】mode to set the DMX ADDRESS.
3.5 PERFORM
CHANNEL FUNCTIONVALUE
SERVICE
CCT
2700K
4200K
5600K
6500K
8000K
3200K
CALIB.P/T PAN
TILT
±99
±99
DIMMER
X FINE
Y FINE
0-255
±99
±99
MENU
OFF
FANS
PERFORM
SLOW
NORMAL
FAST
AUTO
BLACKOUT
OFF
ON
DIMMER
DIM4
DIM3
DIM2
DIM1
OFF
PAN/TILT
PAN INVERT
NORMAL
INVERT
TITL INVERT
NORMAL
INVERT
PT SPEED
FAST
SLOW
COLOR
UC
RGBtoW
PT RANGE
P.START
P.END
T.START
T.END
USE
0-255
0-255
0-255
0-255
NO
YES

6
17
1
2
3
4
5
6
PAN
PAN FINE
TITL
TITL FINE
PT SPEED
CYAN
MAGENT
YELLOW
DIMMER
7
8
9
10
11
MARCOS
NO FUNCTION
static 1
static 2
static 3
static 4
static 5
static 6
static ALL
RING1 (CLOCKWISE )
RING2 (ANTI-CLOCKWISE)
RED-2700k
ORANGE-2700K
YELLOW-2700K
GREEN-2700K
CYAN-2700K
BLUE-2700K
A SINGLE POINT
NO FUNCTION
CYAN 100% / MAGENTA UP / YELLOW 0%
CYAN DOWN / MAGENTA 100% / YELLOW 0%
CYAN 0% / MAGENTA 100% / YELLOW UP
CYAN 0% / MAGENTA DOWN / YELLOW 100%
CYAN UP / MAGENTA 0% / YELLOW 100%
CYAN 100% /MAGENTA 0%/YELLOW DOWN
CYAN 100%/MAGENTA UP/YELLOW 0%
NO FUNCTION
2700K
3200K
4200K
5600K
6500K
8000K
CHANNEL FUNCTIONVALUE
INFO
SYSTEM ERROR
TEMPERATURE
VERSION
V01
STAND ALONE
RUN
DMX512
ARTNET
ARTNET2DMX
AUTO1
AUTO2
CUSTOM
TEST
SLAVE
NETWORK PARA
RDM UID
LABEL
0X388Axxxxxxxx
PLUTO 800XE
EDIT
PAN
TITL
RED
GREEN
BLUE
WHITE
DIMMER
STROBE
TIME
USE
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-25
0-255
YES
ZOOM
0-255
STEP(01-50)
NO
SETTING
WDMX
SETTINGS LOCK
OFF
ON
SERVECE LOCK
OFF
ON
RECOVERY *****
WDMXHIDE
XY OFFSET
YES
YES
NO
NO
WDMX POWER
OFF
ON
NETWORK
NET SWITCH
OFF
ON
IP MODE
DEFAUL IP
CUSTOM IP
XX.XX.XX.XX
ADDR XXX
UNIVERS
WDMX RESET
YES
NO
UPLOAD
LOAD PARA
LOAD EDIT
YES
NO
YES
NO
CUSTOM IP SET
DMX RESET
DMX
DISPLAY
DISPLAY ON
SHORT
LONG
DISPLAY LOCK
OFF
ON
YES/NO
YES/NO
MANUAL
ALL RESET
YES
PT RESET
NO
YES
NO
SENSORHIDE
YES
NO

518
11
MAGENTA-2700K
RED-2700k
RED-5600K
ORANGE-5600K
YELLOW-5600K
GREEN-5600K
CYAN-5600K
BLUE-5600K
MAGENTA-5600K
RED-5600K
15
CONTROL
NO FUNCTION
PAN/TILT BLACK ACTIVATED
PAN/TILT BLACK DEACTIVATED
FAN SLOW
FAN NORMAL
FAN FAST
FAN AUTO
AUTO1
AUTO2
CUSTOM
TEST
RESET
NO FUNCTION
DIM0
DIM1
DIM2
DIM3
DIM4
NO FUNCTION
13
14
179
STROBE
NO FUNCTION
STROBE FROM （SLOD TO FAST ，0-25Hz）
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
ZOOM
AUTO SPEED SLOW TO FAST
12
3.1 DISPLAY OPERATION
3.2 MENU MAP
3 DISPLAY PANEL OPERATION
CHANNEL FUNCTIONVALUE
DOWN
ENTER
UP
MENU
◆ MENU： ；BACK
ENTER OR SAVE◆ ENTER： ；
◆ DOWN： ；DOWN
◆ UP： ；UP
(Start display screen when press 3 seconds)
OFF
FULL POWER CCT
3200K
4200K
5600K
10000K
NORMAL
MENU
ADDRESS
HSIC
PERSON
001-512
PERSON1
PERSON2
FANS
PERFORM
SLOW
NORMAL
FAST
AUTO
BLACKOUT
OFF
ON
DIMMER
DIM4
DIM3
DIM2
DIM1
OFF
CMY
PAN/TILT
PAN INVERT
NORMAL
INVERT
TITL INVERT
NORMAL
INVERT
PT SPEED
FAST
SLOW
COLOR
UC
RGBtoW
PIXEL
PT RANGE
P.START
P.END
T.START
T.END
USE
0-255
0-255
0-255
0-255
NO
YES
PWM
1200Hz X FINE ±99
2000Hz Y FINE ±99
2400Hz
6000Hz
25000Hz
DMX ERROR
SAVE
BLACK

4
19
2700k
magenta magenta
2700k
blue blue
2700k
cyan cyan
2700k
green green
2700k
yellow yellow
2700k
orange orange
2700k
red red
5600k
red red
5600k
orange orange
5600k
yellow yellow
5600k
green green
5600k
cyan cyan
5600k
blue blue
5600k
magenta magenta
5600k
red red
2700k
red red
STATIC 1 STATIC 2 STATIC 3 STATIC 4
STATIC 5 STATIC 6 STATIC ALL RING1
RING2 RED-2700K ORANGE-2700K YELLOW-2700K
GREEN-2700K CYAN-2700K BLUE-2700K MAGENTA-2700K
RED-2700k RED-5600K ORANGE-5600K YELLOW-5600K
GREEN-5600K CYAN-5600K BLUE-5600K
MAGENTA-5600K
RED-5600K
2.2 FUSE REPLACEMENT
SAFTY CAP
FUSE
●Remove the safety cap by a screwdriver.
etch the old fuse from safety cap.● F
nstall a new fuse. ● I
nstall the safety cap.● I
● 220~240V: 14 units may be connected in series
● 110~120V: 7 units may be connected in series
2.3 POWER CONNECTIONS
Note:
If the signal cable is over 60m between the DMX512 controller and fixture
or beween two fixtures, then a DMX signal amplifier is needed as well.
1
3
2
2.4 Connect main controller with several fixtures
Termination plug
3pin XLR (male)
As image , terminate the link by installing a 120 Ohm
resistor in the output socket of the last fixture.
When connect main controller with several fixtures , please
Terminate the link by installing a termination plug in the output socket of the last fixture.
The termination plug, which is a male XLR plug with a 120 Ohm, 0.25 Watt resistor
soldered between pins 2 and 3, soaks up the control signal so it does not reflect and
cause interference.
Pixel effect function
After reset , the fixture head direction is the position of 1-3 LED chips