SI Nano Box 275 User manual
INSTALLERS: Please leave this manual with the owner.
Nano Box
V1 & V2
(275 / 375 / 475)
Installation Instructions
®
Screen Innovations warrants its products, to the original purchaser only, to be free from defects in materials and
workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are
properly operated according to Screen Innovations' instructions and are not damaged due to improper handling
or treatment after shipment from the factory.
This warranty does not apply to equipment showing evidence of misuse, abuse, or accidental damage, or which
has been tampered with or repaired by a person other than authorized Screen Innovations personnel.
Screen Innovations’ sole obligation under this warranty shall be to repair or to replace (at Screen Innovations’
option) the defective part of the merchandise. Returns for service should be made to your Screen Innovations'
dealer. If it is necessary for the dealer to return the screen or part to Screen Innovations, transportation
expenses to and from Screen Innovations are payable by the purchaser and Screen Innovations is not
responsible for damage in shipment. To protect yourself against damage or loss in transit, insure the product
and prepay all transportation expenses.
This warranty is in lieu of all other warranties, express or implied, including warranties as to tness for use and
merchant ability. Any implied warranties of tness for use, or merchantability, that may be mandated by statute
or rule of law are limited to the one (1) year warranty period. This warranty gives you specic legal rights, and
you may also have other rights, which vary from state-to-state. No liability is assumed for expenses or damages
resulting from interruption in operation of equipment, or for incidental, direct, or consequential damages of any
nature.
In the event that there is a defect in materials or workmanship of a Screen Innovations product, you may contact
our Sales Partners at 9715-B Burnet Road Suite 400, Austin, TX 78758, (512) 832-6939.
Important: this warranty shall not be valid and screen innovations shall not be bound by this warranty if the
product is not operated in accordance with screen innovations' written instructions.
Keep your sales receipt to prove the date of purchase and your original ownership.
Limited 1 year warranty
on Screen Innovations products
Technical Support:
Hours of Support:
TABLE OF CONTENTS
Parts in the Box – Nano Box .................................................................4
Spacer Blocks And Leveling Shims (Optional)................................................5
Installation – Nano Box ....................................................................6 – 7
Power Options – Nano Box ................................................................8 – 10
Installation – Nano Box ......................................................................11
AC, Low Voltage (DC) & Control – Wiring .................................................... 12
Low Voltage Power & 485 Control Wiring (DC Motor) ....................................... 12
AC Wiring (AC Motor)....................................................................... 12
Low Voltage Power (DC Motor) ............................................................. 12
485 Control Wiring (AC Motor).............................................................. 12
Wire Considerations – Nano Box ............................................................ 13
24v DC – Using 5 Conductor Wire........................................................... 13
24v DC – Using UTP Wire ................................................................... 13
Termination For 4 – Conductor Third Party Cable ........................................... 13
Commisioning Guide Reference ...........................................................14
Controls Guide Reference ..................................................................14
Servicing Nano V2 Box ..................................................................... 15
Servicing Nano V2 Box – Wireless Sleep Mode ..............................................24
4
Spacer Blocks (Optional – 4 per Shade)
Longer Screws Included
Terminal Block Brackets
(only low voltage and/or 485)
Leveling Shims
(4 per Shade)
Shades Wall Brackets
Screws Included
(3 per Bracket)
OR
Terminal Blocks
PARTS IN THE BOX – NANO BOX
Installation Remotes
(1 per RTS shade)
Included remotes form factor may
vary, however functionality and
performance is consistent.”
5
Spacer Blocks –
NOTE: Do not use more than four (4) spacer blocks per bracket.
Leveling Shims –
NOTE: Do not use more than two (2) leveling shims per bracket.
SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL)
2–4” 2–4”
NOTE:
Data For 485 Only
Header
+ 24 VDC
- 24 VDC
Data +
Data -
Data ground
V+
V-
+
-
G
Jamb
INSTALLATION – NANO BOX
7
Proper position for installing Box
INSTALLATION – NANO BOX
POWER OPTIONS – NANO BOX
Header
Jamb
Jamb
2–4” 2–4”
Power Setup:
For 24v DC – Zigbee/RTS/485 Power
For 110v AC – RTS Power
For 110v AC – 485 Power
POWER OPTIONS – NANO BOX
NOTE:
NOTE:
10
POWER OPTIONS – NANO BOX
Narrow
NOTE:
2” - 4” 2” - 4”
For Wirefree Power
1Narrow
1 ”
2
9 ”
16
1 ”
2
9 ”
16
NOTE:
11
Servicing Nano V2 Box
INSTALLATION – NANO BOX
12
Low - Voltage Power (DC Motor)
AC, LOW VOLTAGE (DC) & CONTROL – WIRING
AC Wiring (AC Motor)
Marking
G
Description
24v DC Power Supply
RS485 Data+
RS485 Data-
RS485 Ground
Low - Voltage Power & 485 Control Wiring (DC Motor)
Marking
G
Description
24v DC Power Supply
RS485 Data+
RS485 Data-
RS485 Ground
485 Control Wiring (AC Motor)
Pigtail
L (Brown)
N (Blue)
(Green/Yellow)
Pre-wire Shade
Wire Gauge (AWG)
14
Maximum Supported Wire
Length (FT.)
250
150
100
Wire between Janus terminal block face and the motor only.
Wire Gauge (AWG)
Supported Wire Length (FT.)
275 Shade)
375 Shade)
275 Shade)
375 Shade)
Shade
Blue
Blue White
Green
Green White
Brown
Orange
Brown White
Orange White
WIRE CONSIDERATIONS – NANO BOX
14
Motor Quick Commissioning Guide:
COMMISIONING GUIDE REFERENCE
Fontus Screen Control Guide (Dry Contact, 12v Trigger, IR):
TRO.Y Installation Instructions (RS232, IP Control, 3rd party Control system):
LinkPro Z Installation Instructions (IP Control, 3rd party Control system):
CONTROLS GUIDE REFERENCE
Technical Support:
Hours of Support:
15
SERVICING NANO V2 BOX– DIFFERENTIATE YOUR SHADE
By removing the cover during installation, inspection of the roll and tracking the fabric are possible.
SERVICING NOTES:
•
•
•
•
SERVICING NANO V2 BOX – INSPECTING THE ROLL
17
SERVICING NANO V2 BOX – INSPECTING THE ROLL
NOTE: Retain the safety spacer for reinstallation after service completion.
SERVICING NANO V2 BOX – TUBE REMOVAL
x1
NOTE: At least two people are required to safely perform tube removal.
NOTE: The shade system is now ready for any service.
If any concerns on swapping the motors or fabric tube arise, call SI Shade Support at
SERVICING NANO V2 BOX – TUBE REMOVAL
20
SERVICING NANO V2 BOX – TUBE INSTALLATION
NOTE: Reverse roll shade end caps have additional channels; should the idler engage one of these
channels, use a screw driver to depress the idler and shift into the correct bearing.
This manual suits for next models
2
Table of contents
Other SI Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Closet Maid
Closet Maid MAXIMUM LOAD 4380 installation instructions
OEM Tools
OEM Tools 24829 Operating instructions and parts manual
parktool
parktool PRS-33.2 instructions
TW Audio
TW Audio SBM6 Assembly instructions
VOGELS
VOGELS PPA 370 Mounting instructions
King Slide
King Slide 1B89 Installation instruction
