SI Zero Edge User manual

1
Zero Edge / Fixed
Parts in the Box
INSTALLERS: PLEASE LEAVE THIS MANUAL WITH THE OWNER.

2
PARTS IN THE BOX - HARDWARE KIT
(2) Wall Brackets
Note: For screens
above 133” - 3 brackets
shall be provided
(4) Mounting
Screws
(4) 1/4-20 x 1/4’’
Screws
(Small Trim Only)
(4) Thin Corner
Brackets with Set
Screws
(4) Thick Corner
Brackets with Set
Screws
1/8’’ & 5/32’’
Hex Keys
(4) Gloves (4) Corner Flat
Metal Plates
(For both Standard and Split frame)
(2) Flown
Ceiling Mount
(2) Flown
Cables
LED Remote LED Foam
(2) Flown
Screen Mount
Flying Mount Only
(Purchased Separately)
LED IR Controlled Only
(Purchased Separately)
(4) Corner
Brackets for Trim
Assembly
Mounting
Screws

3
(Frame Asembly Parts)
(1) Horizontal Frame Bottom with Lights
(1) Horizontal Frame Top with No Lights
(2) Vertical Frames
(2) Horizontal Trims
(2)Vertical Trims
(LED Lights Only)
Installation requires three or more people. The product weighs up to 225 lbs.
Please use safe lifting and rigging techniques.
2+
PARTS IN THE BOX – STANDARD FRAME (BELOW 120”)
3/4” Small
Trim Option
1 1/2” Trim Option – Standard
Vertical Support Bar (used only for some
standard frames)
(1 )Material Roll
Note: Trim for Fixed screen will be 2” thick, v/s the Zero Edge will be 0.5”.

4
Installation requires three or more people. The product weighs up to 225 lbs.
Please use safe lifting and rigging techniques.
2+
(2) Horizontal Frame Bottom
(2) Horizontal Frame Top
(2) Vertical Frames
(2) Horizontal Trims
(2) Vertical Trims
PARTS IN THE BOX – SPLIT FRAME (ABOVE 120”)
3/4” Small
Trim Option
1 3/4” Trim Option - Split Frame
(1) Material Roll Vertical Support Bar (used only for some
Standard frames)
(Frame Asembly Parts)
Screen Innovations
9715-B Burnet Rd, Suite 400 Austin, TX 78758
512.832.6939 | www.screeninnovations.com
Note: Trim for Fixed screen will be 2” thick, v/s the Zero Edge will be 0.5”.