SIBER® DRY BALL SIPHON DFSYV3
Example installation
Siphon
IMPORTANT! A removable connector is necessary
for assembly (Not included).
removable connector
IMPORTANT! The Siphon must be installed at
a level below the equipment drain.
Connections Accessories position
Condensate
evacuationpipe
connection
PA -
PA + Equipment drain
connection
1/2”
Equipment drain
connection
Attention!
In vertical installation, it is essential to
position the group leaving the connection
plate in its upper part. The plate should
never be at the bottom.
Condensate evacuation
pipe connection
Attention!
In the case of ceiling installation: install the condensate
siphon in the drain on the side of the ducts that
communicate with the outside. The other drain must be
covered with the stopper.
In the case of wall installation: install the condensate
siphon in the lower drain of the equipment. The other
drain must be covered with the stopper.
Attention!
For enthalpy models, the two drains must be
closed with plugs as the siphon is not
necessary.
Phone: 902 02 72 14 Siber Zone, SLU
Int. Tel.: 0034 93 861 62 61 Fax:
902 02 72 16 Int.
Fax: 0034 93 781 41 08
siber@siberzone.es
www.siberzone.es
Factory and Central Offices PO
Box n.9 c/ Can Maciá n.2
08520 Les
Franqueses del Vallés Barcelona - Spain
v.22.0323