SideTrak Solo Guide

SIDETRAK SOLO FREESTANDING 4K MONITORS

7

Type-C USB Input
On/ Off & Menu
Button
3.5mm Headphones
Input
3
Power on and off / Menu Button
HDMI Input
USB-C type power and
graphics connector
HDMI type power connector
External audio connector,
headset
3
SideTrak Solo 4K Portable Monitor
15.6 inches
Type-C USB Input
USB-C type power only
LED Indicator LED Light Indicator
8
8
9
9
Volume / Menu
Button
Increase (+) Volume / Upward
selection in the menu
Decrease (-) Volume / Downward
selection in the menu and return
USB input for external
keyboard, mouse, U disk, etc.
USB Input
10
11
10
Remote Sensor
11
11
Protective Case/
Kickstand
Volume / Menu
Button
Receives signal from a remote
controller
Screen protector that doubles
as a kickstand

Protective Case/
Kickstand
HDMI Cable

If the monitor won’t turn on, connect the USB-A to USB-C cable along with the HDMI cable.
Check the USB-C port on your laptop for the symbols
shown in the table below. If you have one of the green checked symbols, then your USB-C port will provide data and enough
power to the monitor. Note, MacBook ports are compatible even if there are no symbols next to it.
Watch the installation video here

If you are connecting to other devices, be sure to connect to an external power supply first by using the secondary USB-C
port, then connect the HDMI cable to ensure a smooth transition of signal.
Flip the protective cover over to the back of the monitor and bend the lower half of the protective cover to a 45 degree
angle in order to use the protective cover as your monitor’s kickstand.
3. Using Your Kickstand
monitor screen
protective cover
flipped back and bent
45º angle

You can adjust the volume and back-light without bringing up the main menu by pressing the “+” and “-” buttons
to adjust volume. Press and hold “+” and “-” buttons to adjust the back-light.
To bring up the main menu press the power button once. When inside the menu use the “+” and “-” buttons to
highlight the desired option, and press the power button once to select the highlighted option. Once the option is
highlighted, use “+” and “-” buttons to adjust the values. Press and hold “-” button to return to the previous menu.
+
_
To prevent any damage to the monitor, please turn off and unplug the monitor when left unattended for long periods of time.

Brightness: Adjust from 0-10
Contrast: Adjust between 1-100
Eco: Choose between Standard,
game, movie, photo, and vivid
DCR (Dynamic Contrast): turn
on or off
Sharpness: Adjust between 0-4
Color temp: Change between
9300K, 6500K, and SRGB
Hue & Saturation: Adjust
between 0-100
Low blue light: Adjust
between 0-10
PCM: Change between
Native, SRGB, and ADOBE
Volume: Adjust between 0-10
Mute: Turn sound on or off
Language: Change language
Display rotate: Change screen
between landscape and portrait
HDR (High Dynamic Range):
Change between off, auto, 2084.
Reset: Reset all settings
Battery: See battery power
Change input between auto,
type-c, and HDMI
Menu settings are the same for both touch and
non-touch monitors. However, the menus look
different on each model. This is what the menu
for the touchscreen model will look like.
MENU SETTINGS
Brightness
Contrast
ECO
DCR
Sharpness

A: Press the power button once to bring up the main menu. Move up or down with the “+” and “-” buttons to find the
brightness option. Select the brightness option by pressing on the power button. Once option has been selected, use
“+” to increase brightness or “-” to decrease brightness.
FAQ
Q: Is my laptop compatible with SideTrak Solo 4K?
A: Check the ports on your laptop. If you have a USB-C port with any of the symbols shown on page 3, then your laptop
is compatible and you will only need to use one cord. If you don’t have a compatible USB-C port, then you will need to
plug in the HDMI cord and the USB-C to USB-A cord. If your laptop doesn’t have an HDMI port, you may need to
purchase and additional adapter, a hub, or a dongle.
A: • If you are not using a USB-C to USB-C cord, then make sure your monitor is connected properly to your laptop with
both the HDMI cord and the USB-A to USB-C cord.
• Try using a different port on your laptop or device. You can also try using a different cord.
• Make sure you have turned the monitor on by pressing the power button for three (3) seconds.
• Make sure the correct input source is selected through the input source menu.
Q: The touch feature will not work while connected with an HDMI cable
A: If you are using the HDMI cable, you will also need to use the USB-C cable in order for the touch function to work.
Touchscreen capabilities do not work with mobile phones and might not work on some

SideTrak Solo 4K Portable Monitor
STFR4K15BL / STFR4KTC15BL
320-340cd/m2
H 178º/ V 178º
Typical 6W, Max 13W
355 x 224 x 9.6mm
760g
G+FF glass / Hard Coating
3840 x 2160
1000:1
25ms
PPI
0.09(H) x 0.09(V)
104.136 square inch
16.7M
282.42
Refresh Rate

9