Siefken SBP2020 User manual

20V - 2.0 Ah and 4.0 Ah
Li - ion BATTERIES
SBP2020 - SBP2040
Operating Instructions
Please read the operation instructions meticulously and pay particular attention to the safety instructions.
User´s manual

BRUSHLESS TECH series

Description of Symbols
Technical Abbreviations Key
Specication
Battery Safety
Instructions
Disposal
Warranty
1
1
2
2
3
3
4
This manual contains information necessary for safe and eective operation of this product.
This product has unique features and, even if you are familiar with similar products, it is neces-
sary to read this manual carefully to ensure you fully understand the instructions. Ensure all
users of the tool read and fully understand this manual.
BRUSHLESS TECH series
CONTENT
2.O aH AND 4.O aH Li - ion batteries

1
BRUSHLESS TECH series
2.O aH AND 4.O aH Li - ion batteries
Description of Symbols
Technical Abbreviations Key

2
BRUSHLESS TECH series
2.O aH AND 4.O aH Li - ion batteries
Specication
SBP2020 SBP2040
20V
2.0Ah
Stromspannung //Voltage
Ampere Stunde // Amperes hour
1 HourLadezeit // Charging time
0.40 KgGewicht // weight
117 x 80 x 52mmMaße // Dimensions (LxWxH):
20V
4.0Ah
Stromspannung //Voltage
Ampere Stunde // Amperes hour
1 HourLadezeit // Charging time
0.60 KgGewicht // weight
120 x 80 x 80mmMaße // Dimensions (LxWxH):
Battery Safety
WARNING: Li-Ion batteries, if incorrectly used, stored or charged are a re, burn and explosion hazard.
• Keep the battery out of reach of children.
• Only charge Li-Ion batteries using the charger provided or designed specically for your product.
• Only use Li-Ion batteries provided with a product or specically designed to be compatible.
• Allow batteries to cool for 15 minutes after charging or heavy use. Failure to follow these instructions may
cause overheating or re.
• When not in use batteries should be stored at room temperature (approximately 20˚C/68°F).
• Ensure that battery contacts cannot accidentally short in storage. Keep batteries clean; foreign objects or dirt
may cause a short. Keep away from other metal objects, for example paperclips, coins, keys, nails and screws.
• Under abusive conditions, liquid may be ejected from the battery. This liquid may cause skin irritation or
burns. Avoid contact. If contact accidentally occurs, ush with water. If liquid contacts eyes, seek medical help.
• DO NOT open, disassemble, crush, heat above 60°C or incinerate. Do not dispose of in re or similar.

3
BRUSHLESS TECH series
2.O aH AND 4.O aH Li - ion batteries
Instructions
Please note the following:
• The battery is supplied in a low charge condition. Charge before use.
• Only charge this battery with the charger provided with your power tool.
• Refer to the main manual provided with your charger or power tool for charging instructions.
• Remove the battery as soon as possible from the charger when fully charged.
Disposal
Always adhere to national regulations when disposing of batteries that are no longer functional.
• Discharge batteries before disposal.
• DO NOT dispose of batteries with household waste.
• DO NOT dispose of by incineration, which may release toxic materials or gases plus a risk of explosion.
• Contact your local waste disposal authority for information on the correct way to dispose of batteries.

4
BRUSHLESS TECH series
2.O aH AND 4.O aH Li - ion batteries
Built
to Exceed
Each tool SIEFKEN INDUSTRIELL has warranty to the original buyer from being free of defects in materials and labor.
Its subjected to certain exceptions, SIEFKEN will fix or replace any part of any power tool, after examinated, and if its determined by siefkenn like material
defective or labor by a period of (3) years*, after the date of the purchase, at least theres any other thing pointed out. The power tool must be returned to
the SIEFKEN service center location or the service center authorized by SIEFKEN, the shipment must be paid and secure. Must include a copy of the proof
of purchase with the returned product. This warranty does not apply to damages that SIEFKEN determines that are as a result of maintenance done by
someone who does not belonged to siefken service center or associates, also by incorrect use, alterations, abuse, natural usage nor accidents.
Siefken includes in its tools 5 free preventive maintenance by year during the warranty time of the tool.
Also, any corrective service will have a 1 year warranty. (Does not apply for service done by any person that does not belong to the siefken staff, also like
damaged made by incorrect use, alterations, abuse, natural usage nor accidents)
If the siefken tool do not satisfies the need in work, during the 30 days after your purchase you will be able to change your power tool with on of the same
reference but with more capacity just by paying the difference.
To make this warranty valid you should present the warranty policy sealed or the original invoice and return the entire product, without any damages, with
its accessories and original packaging to the distribution network or service centers.
3 YEAR WARRANTY
FREE SERVICE
TOTAL SATISFACTION
unbeatable
WARRANTY
Unübertrefflich Garantie
3
AÑOS
TOTAL
SATISFACTION
Total Zufrieden
NO COST
SERVICE
Service ohne Kosten