Siemens HiPath 500 User manual

HiPath 500
HiPath 3000
HiPath 5000
optiPoint 500 entry
Operating Instructions

Before You Begin
2
Before You Begin
These operating instructions describe the optiPoint 500 entry telephone on your
HiPath 500 and HiPath 3000 / 5000.
They describe all functions you can use from your telephone. You may find that some func-
tions you wish to use are not available on your telephone. This may be due to one of the
following reasons:
• The function has not been configured for your telephone - please contact your service
personnel.
• Your communications platforms does not support this function - please contact your
service personnel.
Important Notes
CE (customer equipment) does not continue to support emergency dialing after loss of
mains power, if battery back up and power fail switchover to emergency analogue phones
is not available.
Never allow the telephone to come into contact with staining or aggressive liquids such as
coffee, tea, juice, or soft drinks.
For information on telephone maintenance ÆPage 59.
The information provided in this document contains merely general descriptions or charac-
teristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed
in the terms of contract.
The trademarks used are owned by Siemens AG or their respective owners.
Do not operate the telephone in environments where there is a danger of
explosions.
Use only original Siemens accessories. Using other accessories may cause
a hazard and will invalidate the warranty and the CE mark.
Never open the telephone or a key module. If you encounter any problems,
contact the service personnel.

Before You Begin
3
Marks
The device conforms to the EU guideline 1999/5/EG, as attested by the CE
mark.
This device has been manufactured in accordance with our certified environ-
mental management system (ISO 14001). This process ensures that energy
consumption and the use of primary raw materials are kept to a minimum,
thus reducing waste production.
All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
The correct disposal and separate collection of your old appliance will help
prevent potential negative consequences for the environment and human
health. It is a precondition for reuse and recycling of used electrical and elec-
tronic equipment.
For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service, the shop where you pur-
chased the product or your sales representative.
The statements quoted above are only fully valid for equipment which is in-
stalled and sold in the countries of the European Union and is covered by
the directive 2002/96/EC. Countries outside the European Union may have
other regulations regarding the disposal of electrical and electronic equip-
ment.

Contents
4
Contents
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic operating instructions . . . . . . . . . . . . . . . . . . . .8
optiPoint 500 entry control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
How to Use these Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . 9
Accessing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
... With Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
... With Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Making Calls – Basic Functions . . . . . . . . . . . . . . . .11
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Open Listening in the Room During a Call . . . . . . . . . . . . . . . . . . . . . . 11
Dialing Numbers/Making Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Answering a Call With the Handset. . . . . . . . . . . . . . . . . . . . . . . . . 12
On-Hook Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ending the call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turning the Microphone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Calling a Second Party (Consultation Hold) . . . . . . . . . . . . . . . . . . . . . . 13
Switching to the Party on Hold (Toggle) . . . . . . . . . . . . . . . . . . . . . 14
Transferring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using Variable Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Call Forwarding in the Carrier Network
and Forwarding Multiple Subscriber Numbers (MSN) (Not for U.S.) 15
Using Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Storing a Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Answering a Callback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Deleting (All) Stored Callbacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Telephone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the Receiving Volume During a Call. . . . . . . . . . . . . . . . . 17

Contents
5
Making Calls – Convenience Functions . . . . . . . . . 18
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Accepting a Specific Call for Your Colleague . . . . . . . . . . . . . . . . . . 18
Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Answering Calls from the Entrance Telephone
and Opening the Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Dialing Numbers/Making Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Speed-Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using Mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Talking to Your Colleague With a Speaker Call . . . . . . . . . . . . . . . . 22
Automatic Connection Setup (Hotline). . . . . . . . . . . . . . . . . . . . . . . 22
Reserve Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Assigning a Station Number (Not for U.S.) . . . . . . . . . . . . . . . . . . . 24
Associated Dialing/Dialing Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Accepting a Waiting Call (Camp-On) . . . . . . . . . . . . . . . . . . . . . . . . 25
Preventing and Allowing Call Waiting (Automatic Camp-On). . . . . . 26
Turning the Call Waiting Tone On and Off . . . . . . . . . . . . . . . . . . . . 26
Parking a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Picking up (Retrieving) a Held Call . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Conducting a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Activating Tone Dialing/DTMF Suffix-Dialing . . . . . . . . . . . . . . . . . . 28
After a Speaker Call (Announcement) in a Group . . . . . . . . . . . . . . 29
Trunk Flash (Not for HiPath 500) . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
If You Cannot Reach a Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Call Waiting (Camp-On) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Busy Override - Joining a Call in Progress . . . . . . . . . . . . . . . . . . . . 30
Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Saving Function, Procedures and Appointment . . 32
Appointments Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Saving Appointments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using Timed Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Displaying and Assigning Call Charges . . . . . . . . . 33
Dialing with Call Charge Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Private Sphere/Security . . . . . . . . . . . . . . . . . . . . . . . 34
Turning Do Not Disturb On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Caller ID Suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Silent Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Monitoring a Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Contents
6
Trace Call: Identifying Anonymous Callers (Not for U.S.) . . . . . . . . . . . 36
Locking the Telephone to Prevent Unauthorized Use . . . . . . . . . . . . . . 36
Locking Another Telephone to Prevent Unauthorized Use . . . . . . . . . . 37
Saving Your PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using Other Functions/Services . . . . . . . . . . . . . . . .38
Sending a Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Deleting Sent Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Answering Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using Another Telephone Like Your Own for a Call . . . . . . . . . . . . . . . 39
Change call number (relocate). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Resetting Services and Functions
(System-Wide Cancellation for a Telephone). . . . . . . . . . . . . . . . . . . . . 41
Activating Functions for Another Telephone . . . . . . . . . . . . . . . . . . . . . 42
Using System Functions from the Outside
(DISA: Direct Inward System Access) . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Controlling Connected Computers or Other Programs and Telephone
Data Service (Not for HiPath 500) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Controlling Relays (Not for HiPath 500) . . . . . . . . . . . . . . . . . . . . . . . . . 45
Radio Paging (Not for U.S., Not for HiPath 500) . . . . . . . . . . . . . . . . . . 45
Simple Paging Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Enhanced Paging Equipment (HiPath 3700/3750/3800 Only) . . . . . 46
Using Team Functions. . . . . . . . . . . . . . . . . . . . . . . . .47
Turning Group Call On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Accepting a Call for Another Member of Your Team . . . . . . . . . . . . . . 48
Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . 48
Uniform Call Distribution (UCD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Team and Executive/Secretary Functions With
Assigned Trunk Lines . . . . . . . . . . . . . . . . . . . . . . . . .50
Forwarding Calls on Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Transferring Calls Directly to the Executive (Only in an Executive/Secretary
Group) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Testing the Telephone. . . . . . . . . . . . . . . . . . . . . . . . .51
Testing the Telephone Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Contents
7
Special Functions in the LAN
(Not for HiPath 500) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Leaving a Hunt Group/Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Transferring Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . 55
Controlling Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Opening the Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Fixing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Telephone Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Overview of Functions and Codes (Alphabetical) . 63
FCC and Industry Canada Compliance. . . . . . . . . . . 69
FCC Certification and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Equipment Attachment Limitations. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Basic operating instructions
8
Basic operating instructions
optiPoint 500 entry control panel
Keys for
telephone settings
Keypad
Handset
Speaker
for ring tones
Eight fixed function keys:
Consultation
Redial
Message Waiting
Callback
Speed Dial
Mute
Speaker
Release
LEDs
Your service personnel can customize the default assignment to meet your
preferences and requirements following order placement.

Basic operating instructions
9
Step by Step
How to Use these Operating
Instructions
You will find a graphic representation of the steps in log-
ical sequence in the left column. Below is an explana-
tion of the symbols:
nLift the handset (off-hook).
tReplace the handset (on-hook).
sConduct a call.
oEnter a telephone number or code.
dd Enter the PIN.
uor vPress volume controls on the telephone.
wYou hear a tone.
A long tone (positive confirmation tone) confirms that
you have successfully activated a function or procedure.
A short tone (negative confirmation tone) indicates that
the function or procedure was rejected.
Press the key.
Press the illuminated key.
Press the flashing key.

Step by Step
Basic operating instructions
10
Accessing Functions
... With Codes
You can activate the functions of your system by enter-
ing codes such as:
qmk DND (do not disturb) on.
rmk DND (do not disturb) off.
All codes to activate or enable functions are always in-
troduced by pressing the star key, and all codes to de-
activate, disable or delete functions are always entered
starting with the pound key.
An alphabetically ordered overview of all functions and
their corresponding codes can be found in the
Appendix (Quick-Reference Operating Instructions).
... With Function Keys
Functions for which a key has been set up can be ac-
cessed directly as follows.
Press the "consultation hold" key. The function is exe-
cuted, provided this is possible in the current situation.
If your service personnel has changed the default
assignments and saved functions on keys in ac-
cordance with your requests or requirements,
you can execute these functions by pressing the
appropriate keys.
Consultation

Making Calls – Basic Functions
11
Step by Step
Making Calls – Basic Functions
Making and Answering Calls
Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone se-
quence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
Answering a Call
The telephone rings.
nLift the handset.
uor vTo raise or lower the volume, keep pressing the keys un-
til the desired volume is set.
Open Listening in the Room During a
Call
You can let other people in the room join in on the call.
Let the other party know that you have turned on the
speaker.
Precondition: You are conducting a call with the hand-
set.
Activating this function:
Press the key. The LED lights up.
Deactivating this function:
Press the key. The LED goes out.
Speaker
Speaker

Step by Step
Making Calls – Basic Functions
12
Dialing Numbers/Making Calls
Answering a Call With the Handset
nLift the handset.
oInternal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The called party does not answer or is busy:
tReplace the handset.
or
Press the key.
On-Hook Dialing
oInternal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The other party answers with speaker:
nLift the handset.
The called party does not answer or is busy:
Press the key. The LED goes out.
or
Press the key.
Ending the call
tReplace the handset.
or
Press the key.
Release
Speaker
Release
Release

Making Calls – Basic Functions
13
Step by Step
Redialing a Number
The last three external telephone numbers dialed are
stored automatically.
You can redial them simply by pressing a key.
nLift the handset.
Press this key.
Turning the Microphone On and Off
To prevent the other party from listening in while you
consult with someone in your office, you can temporari-
ly switch off the handset microphone or the handsfree
microphone.
Precondition: You are conducting a call. The
microphone is switched on.
Press the key. The LED lights up.
Turning off the mute:
Press the illuminated key. The LED goes out.
Calling a Second Party
(Consultation Hold)
You can call a second party while engaged in a call. The
first party is placed on hold.
Press the key. LED flashes.
oCall the second station.
Return to the first party:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.
Redial
If this feature is configured (contact the service
personnel), accounts codes entered are also
saved ÆPage 33.
Mute
Mute
Consultation
Consultation
Consultation

Step by Step
Making Calls – Basic Functions
14
Switching to the Party on Hold (Toggle)
qf Press the key. Enter the code. LED continues to flash.
Combining the calling parties into a three-party
conference
qg Press the key. Enter the code. The LED goes out.
Connecting the other parties to each other
tReplace the handset.
Transferring a Call
If the person you are speaking to wants to talk to anoth-
er colleague of yours, you can transfer the call that col-
league.
Press the key. LED flashes.
oEnter the number of the party to which you want to
transfer the call.
sAnnounce the call, if necessary.
tReplace the handset.
Call Forwarding
Using Variable Call Forwarding
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
nLift the handset.
qe Enter the code.
eor for gEnter the line type you wish to use: 1 = all calls,
2 = external calls only, 3 = internal calls only
ow Enter the destination number (without the external code).
Consultation
Consultation
Consultation
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) ÆPage 53!

Making Calls – Basic Functions
15
Step by Step
Deactivating call forwarding:
nLift the handset.
re wEnter the code.
Call Forwarding in the Carrier Network
and Forwarding Multiple Subscriber Num-
bers (MSN) (Not for U.S.)
If this function has been configured (contact the service
personnel), you can forward calls to your assigned
multiple subscriber number (MSN) (DID number)
directly within the carrier network.
For example, you can forward your phone line to your
home phone after business hours.
nLift the handset.
qjh Enter the code.
eor for gEnter the line type you wish to use:
1= immediate, 2 = on no answer, 3 = on busy
oEnter your DID number.
owEnter the destination number (without the external
code).
Deactivating call forwarding:
nLift the handset.
rjh Enter the code.
eor for gEnter the activated call forwarding type.
1= immediate, 2 = on no answer, 3 = on busy
owEnter your DID number.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact the service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.

Step by Step
Making Calls – Basic Functions
16
Using Callback
If a user is busy or is not answering, you can store an
automatic callback. This feature saves you from having
to make repeated attempts to reach the user.
You receive a callback,
• When the other party is no longer busy
• When the user who did not answer has conducted
another call.
Storing a Callback
Precondition: You have reached a busy line or noone
answers.
Press the key. The LED lights up.
or
qil
Press the key. LED flashes. Enter the code.
Answering a Callback
Precondition: A callback was saved. Your telephone
rings. The Callback key lights up (if present).
nLift the handset. You hear a ring tone.
Deleting (All) Stored Callbacks
nLift the handset.
ril wEnter the code.
Callback
Consultation

Making Calls – Basic Functions
17
Step by Step
Telephone Settings
Adjusting the Ring Volume
uor vPress one of these keys while the phone is idle.
ePress the key.
uor vTo raise or lower the volume, keep pressing the keys un-
til the desired volume is set.
uvsimultaneously Save.
Adjusting the Ring Tone
uor vPress one of these keys while the phone is idle.
fPress the key.
uor vTo adjust the ring tone, keep pressing the keys until the
desired ring tone is set.
uvsimultaneously Save.
Adjusting the Receiving Volume During a Call
You are engaged in a call.
uor vTo raise or lower the volume, keep pressing the keys un-
til the desired ring tone is set.
uvsimultaneously Save.

Step by Step
Making Calls – Convenience Functions
18
Making Calls – Convenience
Functions
Making Calls
Accepting a Specific Call for Your Colleague
You hear another telephone ring.
nLift the handset.
qim Enter the code.
oEnter the number of the telephone that is ringing.
Rejecting Calls
You can reject calls which you do not wish to take. The
call is then signaled at another definable telephone
(contact the service personnel).
The telephone rings.
Press the key.
If a call cannot be rejected, your telephone will continue
to ring.
Using the Speakerphone
A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement.
You can respond with the handset or in speakerphone
mode.
nLift the handset and answer the call.
Accepting calls in a team ÆPage 48.
Release
Placing a speaker call to a colleague ÆPage 22.

Making Calls – Convenience Functions
19
Step by Step
Answering Calls from the Entrance Telephone
and Opening the Door
If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the
entrance telephone and to activate a door opener.
If you are authorized to activate a door opener (contact
the service personnel), visitors can open the door them-
selves by entering a 5-digit code (e.g. using a DTMF
transmitter or installed keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
nLift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
nLift the handset after more than thirty seconds.
oDial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
qje
Press the key. LED flashes. Enter the code.
owDial the entrance telephone number.
Opening the door with a code (at the door):
oAfter ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Consultation
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) ÆPage 57!

Step by Step
Making Calls – Convenience Functions
20
Activating the door opener:
nLift the handset.
qlm Enter the code.
oDial the entrance telephone number.
owEnter the five-digit code. Default code = "00000" (con-
tact the service personnel).
eor fEnter the type of door opener. 1 = enable with ring,
2 = enable w/o ring = You can also open the door with-
out a doorbell ring.
Deactivating the door opener:
nLift the handset.
rlm Enter the code.
owDial the entrance telephone number.