Siemens IQ500 HB578G5S6B User manual

Oven
HB.78…6B
en User manual and installation instructions
Register your product on My Siemens and discover exclusive ser-
vices and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

en Safety
2
For further information, please refer to the Digital User
Guide.
Table of contents
USER MANUAL
1 Safety....................................................................2
2 Preventing material damage ...............................5
3 Environmental protection and saving en-
ergy .......................................................................5
4 Familiarising yourself with your appliance ........7
5 Accessories..........................................................9
6 Before using for the first time ...........................11
7 Basic operation ..................................................11
8 Rapid heating .....................................................12
9 Time-setting options..........................................12
10 Meat thermometer..............................................14
11 Programme.........................................................15
12 Childproof lock...................................................18
13 Sabbath mode ....................................................18
14 Basic settings.....................................................18
15 HomeConnect ...................................................19
16 Cleaning and servicing......................................21
17 Self-cleaning ......................................................23
18 Shelf supports....................................................24
19 Appliance door...................................................26
20 Troubleshooting.................................................29
21 Disposal..............................................................31
22 Customer Service...............................................31
23 Declaration of Conformity .................................31
24 How it works.......................................................32
25 INSTALLATION INSTRUCTIONS .......................36
25.1 General installation instructions.......................36
1 Safety
Observe the following safety instructions.
1.1 General information
¡Read this instruction manual carefully.
¡Keep the instruction manual and the
product information safe for future refer-
ence or for the next owner.
¡Do not connect the appliance if it has been
damaged in transit.
1.2 Intended use
This appliance is designed only to be built
into kitchen units. Read the special installation
instructions.
Only a licensed professional may connect ap-
pliances without plugs. Damage caused by in-
correct connection is not covered under the
warranty.
Only use this appliance:
¡To prepare meals and drinks.
¡In private households and in enclosed
spaces in a domestic environment.
¡Up to an altitude of max. 4000m above
sea level.
1.3 Restriction on user group
This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad-
equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Children must not play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.

Safety en
3
1.4 Safe use
Always place accessories in the cooking com-
partment the right way round.
→"Accessories", Page9
WARNING‒Risk of fire!
Combustible objects that are left in the cook-
ing compartment may catch fire.
▶Never store combustible objects in the
cooking compartment.
▶If smoke is emitted, the appliance must be
switched off or the plug must be pulled out
and the door must be held closed in order
to stifle any flames.
Loose food remnants, fat and meat juices
may catch fire.
▶Before using the appliance, remove the
worst of the food residues and remnants
from the cooking compartment, heating ele-
ments and accessories.
Opening the appliance door creates a
draught. Greaseproof paper may come into
contact with the heating element and catch
fire.
▶Never place greaseproof paper loosely
over accessories when preheating the ap-
pliance and while cooking.
▶Always cut greaseproof paper to size and
use a plate or baking tin to hold it down.
WARNING‒Risk of burns!
The appliance and its parts that can be
touched become hot during use.
▶Caution should be exercised here in order
to avoid touching heating elements.
▶Young children under 8 years of age must
be kept away from the appliance.
Accessories and cookware get very hot.
▶Always use oven gloves to remove ac-
cessories or cookware from the cooking
compartment.
When the cooking compartment is hot, any al-
coholic vapours inside may catch fire.
▶Only use small quantities of drinks with a
high alcohol content in food.
▶Open the appliance door carefully.
WARNING‒Risk of scalding!
The accessible parts of the appliance become
hot during operation.
▶Never touch these hot parts.
▶Keep children at a safe distance.
Hot steam may escape when you open the
appliance door. Steam may not be visible, de-
pending on the temperature.
▶Open the appliance door carefully.
▶Keep children at a safe distance.
If there is water in the cooking compartment
when it is hot, this may create hot steam.
▶Never pour water into the cooking compart-
ment when the cooking compartment is
hot.
WARNING‒Risk of injury!
Scratched glass in the appliance door may
develop into a crack.
▶Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass
on the oven door, as they may scratch the
surface.
The hinges on the appliance door move when
the door is opened and closed, which could
trap your fingers.
▶Keep your hands away from the hinges.
Components inside the appliance door may
have sharp edges.
▶Wear protective gloves.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶Repairs to the appliance should only be
carried out by trained specialist staff.
▶Only use genuine spare parts when repair-
ing the appliance.
▶If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
If the insulation of the power cord is dam-
aged, this is dangerous.
▶Never let the power cord come into contact
with hot appliance parts or heat sources.
▶Never let the power cord come into contact
with sharp points or edges.
▶Never kink, crush or modify the power
cord.
An ingress of moisture can cause an electric
shock.
▶Do not use steam- or high-pressure clean-
ers to clean the appliance.

en Safety
4
If the appliance or the power cord is dam-
aged, this is dangerous.
▶Never operate a damaged appliance.
▶Never operate an appliance with a cracked
or fractured surface.
▶Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶Call customer services. →Page31
WARNING‒Danger: Magnetism!
Permanent magnets are used in the control
panel or in the controls. These may affect
electronic implants, e.g. heart pacemakers or
insulin pumps.
▶Wearers of electronic implants must stay at
least 10 cm away from the control panel.
WARNING‒Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶Keep packaging material away from chil-
dren.
▶Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
1.5 Halogen bulb
WARNING‒Risk of burns!
The bulbs in the cooking compartment get
very hot. There is still a risk of burning for
some time after they have been switched off.
▶Do not touch the glass cover.
▶Avoid contact with your skin when cleaning.
WARNING‒Risk of electric shock!
When changing the bulb, the bulb socket con-
tacts are live.
▶Before replacing the bulb, ensure that the
appliance is switched off in order to pre-
vent a potential electric shock.
▶Also unplug the appliance from the mains
or switch off the circuit breaker in the fuse
box.
1.6 Meat probe
WARNING‒Risk of electric shock!
Using the wrong meat probe could damage
the insulation.
▶Only use the meat probe for this specific
appliance.
1.7 Cleaning function
WARNING‒Risk of fire!
Loose food remnants, fat and meat juices
may catch fire when the cleaning function is in
progress.
▶Before you start the cleaning function, al-
ways remove coarse dirt from the cooking
compartment.
▶Never clean accessories at the same time.
The outside of the appliance gets very hot
when the cleaning function is in progress.
▶Never hang combustible objects, e.g. tea
towels, on the door handle.
▶Leave the front of the appliance clear.
▶Keep children at a safe distance.
If the door seal is damaged, a large amount
of heat is generated around the door.
▶Do not scrub or remove the seal.
▶Never operate the appliance if the seal is
damaged or missing.
WARNING‒Risk of serious harm to
health!
The appliance gets very hot when the clean-
ing function is in progress. The non-stick coat-
ing on baking trays and tins is destroyed and
noxious gases are released.
▶Never clean non-stick baking trays or bak-
ing tins using the cleaning function.
▶Never clean accessories at the same time.
WARNING‒Risk of harm to health!
The cleaning function heats up the cooking
compartment to a very high temperature so
that food left over from roasting, grilling and
baking will burn off. This process releases va-
pours, which can irritate mucous membranes.
▶Keep the kitchen well ventilated while the
cleaning function is running.
▶Do not remain in the room for long periods.
▶Keep children and pets away.

Preventing material damage en
5
WARNING‒Risk of burns!
The cooking compartment gets very hot when
the cleaning function is in progress.
▶Never open the appliance door.
▶Allow the appliance to cool down.
▶Keep children at a safe distance.
The outside of the appliance gets very hot
when the cleaning function is in progress.
▶Never touch the appliance door.
▶Allow the appliance to cool down.
▶Keep children at a safe distance.
2 Preventing material damage
2.1 General
ATTENTION!
Objects on the cooking compartment floor at over
50°C will cause heat to build up. The baking and
roasting times will no longer be correct and the enamel
will be damaged.
▶Do not place any accessories, greaseproof paper or
foil of any kind on the cooking compartment floor.
▶Only place cookware on the cooking compartment
floor if a temperature above 50°C has been set.
When the cooking compartment is hot, any water in-
side it will create steam. The change in temperature
may cause damage.
▶Never pour water into the cooking compartment
when it is still hot.
▶Never place cookware containing water on the
cooking compartment floor.
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶Allow the cooking compartment to dry after use.
▶Do not keep moist food in the cooking compartment
for a long time with the door closed.
▶Do not store food in the cooking compartment.
Leaving the appliance to cool down with the door open
will damage the front of neighbouring kitchen units over
time.
▶Always allow the cooking compartment to cool
down with the door closed after cooking at high
temperatures.
▶Take care not to trap anything in the appliance
door.
▶Only leave the cooking compartment to dry with the
door open if a lot of moisture was produced during
operation.
Fruit juice dripping from the baking tray leaves stains
that cannot be removed.
▶When baking very juicy fruit flans, do not pack too
much on the baking tray.
▶If possible, use the deeper universal pan.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶Never use oven cleaner in the cooking compartment
when it is still warm.
▶Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
If the seal is very dirty, the appliance door will no
longer close properly during operation. This may dam-
age the front of adjacent kitchen units.
▶Keep the seal clean at all times.
▶Never operate the appliance if the seal is damaged
or missing.
Sitting or placing objects on the appliance door may
damage it.
▶Do not place or hang objects on the appliance door.
▶Do not place cookware or accessories on the appli-
ance door.
With certain models, accessories may scratch the door
pane when closing the appliance door.
▶Always push accessories fully into the cooking com-
partment.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Only preheat the appliance if the recipe or the recom-
mended settings tell you to do so.
¡Not preheating the appliance can reduce the en-
ergy used by up to 20%.
Use dark-coloured, black-coated or enamelled baking
tins.
¡These types of baking tin absorb the heat particu-
larly well.

en Environmental protection and saving energy
6
Open the appliance door as little as possible during
operation.
¡This will maintain the temperature in the cooking
compartment and eliminate the need for the appli-
ance to reheat.
When baking multiple dishes, do so in succession or
in parallel.
¡The cooking compartment is heated after baking
the first dish. This reduces the baking time for the
second cake.
If the cooking time is relatively long, you can switch
the appliance off 10minutes before the cooking time
ends.
¡There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡This will save the energy that would otherwise be
required to defrost it.

Familiarising yourself with your appliance en
7
4 Familiarising yourself with your appliance
4.1 Controls
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Note:On certain models, specific details such as col-
our and shape may differ from those pictured.
1
2 3
1
Buttons and display
The buttons are touch-sensitive surfaces. To se-
lect a function, simply press lightly on the relev-
ant field.
The display shows symbols for active functions
and the time-setting options.
→"Buttons and display", Page7
2
Function selector
Use the function selector to set the types of
heating and other functions.
You can turn the function selector clockwise or
anti-clockwise from the zero setting .
Depending on the appliance, the function se-
lector can be pushed in. Press on the function
selector to click it into or out of the zero set-
ting .
→"Types of heating and functions", Page7
3
Temperature selector
Use the temperature selector to set the temper-
ature for the type of heating and select settings
for other functions.
You can turn the temperature selector clock-
wise and anti-clockwise; it does not have a zero
setting.
Depending on the appliance, the temperature
selector can be pushed in. Press on the tem-
perature selector to click it in or out.
→"Temperature and setting levels", Page8
4.2 Buttons and display
You can use the buttons to set various functions for your appliance. The display shows the settings.
If a function is active, the corresponding symbol lights up in the display. The clock symbol only lights up when you
change the time.
Symbol Function Use
Time-setting options Select the time , timer , cooking time and the end time ⁠.
To select the individual time-setting options, press the button sev-
eral times.
The arrows above and below a symbol indicate the function to
which the setting in the display corresponds.
Minus
Plus
Decrease the setting values.
Increase the setting values.
Oven light Switch the lighting in the cooking compartment on and off.
Rapid heating Preheat the cooking compartment rapidly without accessories.
Childproof lock Activate or deactivate the childproof lock.
4.3 Types of heating and functions
To ensure that you always use the right type of heating to cook your food, we have explained the differences and ap-
plications below.
When you select a type of heating, the appliance suggests a suitable temperature or setting. You can use these val-
ues or change them within the specified range.

en Familiarising yourself with your appliance
8
Symbol Type of heating and
temperature range
What it's used for/how it works
3Dhot air
30-275°C
Bake and roast on one or more levels.
The fan distributes the heat from the ring-shaped heating element in the back
wall evenly around the cooking compartment.
Hot air gentle
125-275°C
Cook selected dishes gently on one level without preheating.
The fan distributes the heat from the ring-shaped heating element in the back
wall evenly around the cooking compartment. The food is cooked in phases us-
ing residual heat.
Always keep the appliance door closed when cooking.
This type of heating is used to determine the energy consumption in air recircu-
lation mode and the energy efficiency class.
coolStart function
30-275°C
Prepare frozen products quickly, without preheating.
Align the temperature and the cooking time according to the manufacturer's
specifications on the packaging. Set the highest temperature indicated, set the
cooking time as indicated or set a shorter time. Place the food in at level 3.
Pizza setting
30-275°C
Cook pizza or dishes that require a lot of heat from below.
The bottom heating element and the ring-shaped heating element in the back
wall heat the cooking compartment.
Slow cooking
70-120°C
Slowly and gently cook seared, tender pieces of meat in uncovered cookware.
The heat is emitted evenly from above and below at a low temperature.
Full-surface grill
Grill settings:
1 = low
2 = medium
3 = high
Grill flat items such as steak and sausages, or make toast. Gratinate food.
The entire area underneath the grill element becomes hot.
Hot air grilling
30-275°C
Roast poultry, whole fish and larger pieces of meat.
The grill element and the fan switch on and off alternately. The fan circulates the
hot air around the food.
Top/bottom heating
30-275°C
Traditionally bake or roast on one level. This type of heating is ideal for cakes
with moist toppings.
The heat is emitted evenly from above and below.
This type of heating is used to measure the energy consumption in the conven-
tional mode.
Other functions
Here, you can find an overview of other functions of your appliance.
Symbol Function Use
Programme Use programmed setting values for various types of food.
→"Programme", Page15
Self-cleaning Set the cleaning function, which cleans the cooking compartment virtually inde-
pendently.
→"Self-cleaning ", Page23
Remote start Start and operate the appliance via the Home Connect app. →Page19
Note:If you operate your appliance with the
HomeConnect app, even more functions are available
for you. You can find more information about this in the
app.
4.4 Temperature and setting levels
There are different settings for the types of heating and
functions.
The settings appear in the display.
The temperature can be set in 1 degree increments up
to 100°C, and in 5 degree increments thereafter.
Note:For grill setting3, the appliance lowers the set-
ting to grill setting1 after approx. 20minutes.
Heat-up indicator
The appliance indicates when it is heating up.
When the appliance is heating, the symbol fills with
colour on the display.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
as soon as the symbol is completely filled with colour.
Residual heat indicator
If you switch off the appliance, the symbol on the dis-
play shows the residual heat in the cooking compart-
ment. The lower the temperature in the cooking com-
partment, the less the symbol is filled.

Accessories en
9
Notes
¡The heat-up indicator will only show the temperature
increasing for types of heating for which a temperat-
ure is set. For grill settings, for example, the heat-up
indicator shows a full line from the beginning.
¡If the temperature in the cooking compartment is
too high when the appliance is started, appears in
the display for some types of heating. Switch off the
appliance and allow it to cool down. Then restart op-
eration of the appliance.
¡Due to thermal inertia, the temperature displayed
may differ slightly from the actual temperature inside
the cooking compartment.
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→"Accessories", Page9
Your appliance has five shelf positions. The shelf posi-
tions are numbered from bottom to top.
Depending on the appliance, the shelf supports are fit-
ted with pull-out rails or clip-on pull-out rails. The pull-
out rails are fixed in place and cannot be removed. The
clip-on pull-out rails allow you to use them as you wish
at all free shelf positions.
You can remove the shelf supports, e. g. for cleaning.
→"Shelf supports", Page24
Lighting
The oven light lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. The lighting goes off when
operation ends.
You can switch on the lighting without heating the oven
using the Oven light button.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
▶Ensure that the ventilation slots are unobstructed.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
appliance stops heating. When you close the appliance
door, the appliance continues to heat again.
5 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note:Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
The accessories supplied may differ depending on the
appliance model.

en Accessories
10
Accessories Use
Wire rack ¡Cake tins
¡Ovenproof dishes
¡Cookware
¡Meat, e.g. roasting joints or steak
¡Frozen meals
Universal pan ¡Moist cakes
¡Baked items
¡Bread
¡Large roasts
¡Frozen meals
¡Catching dripping liquids, e.g. fat when
grilling food on the wire rack.
Meat thermometer High-precision roasting or cooking.
→"Meat thermometer", Page14
5.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
5.2 Sliding accessories into the cooking
compartment
Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.
1. Turn the accessories so that the notch is at the
rear and is facing downwards.
2. Insert accessories between the two guide rods for
the shelf position.
Wire rack Insert the wire rack with the open
side facing the appliance door and
the curved lip facing downwards.
Baking tray
E.g. univer-
sal pan or
baking tray
Slide the tray, e.g. the universal pan,
in with the sloping edge facing the
appliance door.
3. Place the accessory at the shelf positions with the
pull-out rails and pull out the pull-out rails.
Wire rack
or baking
tray
Position the accessory so that its
edge is behind the lug on the pull-
out rail.
Note:The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
4. Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note:Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
1. Place the wire rack on the universal pan so that
both spacers are on the rear edge of the univer-
sal pan.
2. Insert the universal pan between the two guide rods
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan

Before using for the first time en
11
5.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
You need to make settings for initial use before you
can use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:The function selector must be set to the
"Off" position ⁠.
1. Use the or button to set the time.
2. Press the button.
aThe time that is set appears on the display.
Tip:You can go to the basic settings →Page18 to
specify whether or not the time should be shown on
the display.
6.2 Cleaning the appliance before using
it for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1. Remove any accessories and leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2. Before heating the appliance, wipe the smooth sur-
faces in the cooking compartment with a soft, damp
cloth.
3. Keep the room ventilated while the appliance is
heating.
4. Set the type of heating and temperature.
→"Basic operation", Page11
Type of heat-
ing
3Dhot air
Temperature Maximum
Cooking time 1 hour
5. Switch off the appliance after the specified cooking
time.
6. Wait until the cooking compartment has cooled
down.
7. Clean the smooth surfaces with soapy water and a
dish cloth.
8. Clean the accessories using soapy water and a dish
cloth or soft brush.
7 Basic operation
7.1 Switching on the appliance
▶Turn the function selector to any position other than
the "Off" position ⁠.
aThe appliance is switched on.
7.2 Switching off the appliance
▶Turn the function selector to the "Off" position ⁠.
aThe appliance is switched off.
7.3 Setting the type of heating and
temperature
1. Use the function selector to set the type of heating.
2. Use the temperature selector to set the temperature
or grill setting.
aThe appliance starts heating after a few seconds.
aDepending on the appliance type, rapid heating
automatically switches off for set temperatures of
200°C and above for certain types of heating.
→"Rapid heating", Page12
3. When your food is ready, switch off the appliance.
Tips
¡The most suitable type of heating for your food can
be found in the description of the type of heating.
→"Types of heating and functions", Page7
¡You can also set a cooking time and end time on
the appliance.
→"Time-setting options", Page12
Changing the type of heating
You can change the type of heating at any time.
▶Use the function selector to set the required type of
heating.
Changing the temperature
You can change the temperature at any time.

en Rapid heating
12
▶Use the temperature selector to set the required
temperature.
8 Rapid heating
To save time, rapid heating can shorten the preheating
time for set temperatures over 100°C.
Rapid heating is possible for the following types of
heating:
¡3Dhot air
¡Top/bottom heating
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:Do not set a cooking time until rapid heating has
come to an end.
1. Set a suitable type of heating and a temperature of
at least 100°C.
Rapid heating automatically switches off at temper-
atures of 200°C and above.
2. If rapid heating does not switch off automatically,
press the button.
a appears in the display.
aRapid heating starts after a few seconds.
aOnce rapid heating has ended, a signal tone
sounds and the symbol goes out on the display.
3. Place the food in the cooking compartment.
Cancelling rapid heating
▶Press the button.
aThe symbol disappears from the display.
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the button, select the different time-setting op-
tions.
Time-setting
option
Use
Timer The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time You can set the time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
1. Press the button repeatedly until is highlighted
in the display.
2. Use the or button to set the timer duration.
Button Default value
5minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. Above 10 minutes, the
time increments become longer the higher the
value.
aThe timer starts and the timer duration begins to
count down after a few seconds.
aAn audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
3. Once the timer duration has elapsed:
‒Press any button to switch off the timer.
Changing the timer
You can change the timer duration at any time.
Requirement: is highlighted on the display.
▶Use the or button to change the timer duration.
aThe appliance applies the change after a few
seconds.
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted on the display.
▶Use the button to reset the timer duration to zero.
aAfter a few seconds, the appliance applies the
change and goes out.
9.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement:The type of heating and temperature or
setting are set.
1. Press the button repeatedly until is highlighted
in the display.
2. Use the or button to set the cooking time.

Time-setting options en
13
Button Default value
10 minutes
30minutes
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
aThe appliance starts heating and the cooking time
counts down after a few seconds.
aIf the cooking time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
3. When the cooking time has elapsed:
‒Press any button to end the audible signal before
it sounds.
‒To set a cooking time again, press the button.
‒When your food is ready, switch off the appli-
ance.
Changing the cooking time
You can change the cooking time at any time.
Requirement: is highlighted on the display.
▶Change the cooking time using the or button.
aThe appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
Requirement: is highlighted on the display.
▶Reset the cooking time to zero using the button.
aAfter a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
9.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡Food will spoil if you leave it in the oven cavity too
long.
Requirements
¡The type of heating and temperature or setting are
set.
¡A cooking time is set.
1. Press the button repeatedly until is highlighted
in the display.
2. Press the or button.
aThe display shows the calculated end time.
3. Use the or button to delay the end time.
aAfter a few seconds, the appliance applies the set-
ting and the display shows the set end time.
aOnce the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
aOnce the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
4. When the cooking time has elapsed:
‒Press any button to end the signal prematurely.
‒To set another cooking time, press the button.
‒When your food is ready, switch off the appli-
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement: is highlighted on the display.
▶Use the or button to delay the end time.
aThe appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end at any time.
Requirement: is highlighted on the display.
▶Reset the end time to the current time plus the set
cooking time using the button.
aAfter a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
9.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:The function selector must be set to the
"Off" position ⁠.
1. Use the or button to set the time.
2. Press the button.
aThe time that is set appears on the display.
Tip:You can go to the basic settings →Page18 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement:The function selector must be set to the
"Off" position ⁠.
1. Press the button repeatedly until is highlighted
in the display.
2. Use the or button to change the time.
aThe appliance applies the change after a few
seconds.

en Meat thermometer
14
10 Meat thermometer
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. Once the set core temperature has been
reached in the food, the appliance stops automatically.
10.1 Suitable types of heating with the
meat thermometer
Only certain types of heating are suitable for use with
the meat thermometer.
Suitable heating functions include:
¡3Dhot air
¡Hot air gentle
¡Pizza setting
¡Hot air grilling
¡Top/bottom heating
Note:If the meat thermometer is being used and you
select an unsuitable type of heating, a signal sounds.
10.2 Inserting the meat thermometer
Use the meat thermometer supplied or order a suitable
meat thermometer from our after-sales service.
WARNING‒Risk of electric shock!
Using the wrong meat probe could damage the insula-
tion.
▶Only use the meat probe for this specific appliance.
ATTENTION!
Otherwise the meat probe may be damaged.
▶Do not trap the cable of the meat probe.
▶To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
1. Insert the meat thermometer at an angle into the
thickest part of the meat.
Ensure that the tip of the meat thermometer is
correctly positioned in the meat:
– The tip must be roughly in the middle of the
food.
– The tip must not be inserted in the fat.
– The tip must not touch any cookware or bones.
2. Place the food with the meat thermometer into the
cooking compartment.
It is best to place the food in cookware into the
centre of the wire rack.
3. Plug the meat thermometer into the socket on the
left-hand side of the cooking compartment.
Notes
¡If you remove the meat thermometer while the food
is cooking, all the settings will be reset.
¡Do not remove the meat thermometer when turning
the food. Once you have turned the food, check that
the meat thermometer is correctly positioned in the
food.
10.3 Setting the meat probe
The meat probe measures the temperature inside the
food between 30 °C and 99 °C.
Requirements
¡The food with the meat probe is in the cooking com-
partment.
¡The meat probe is plugged in inside the cooking
compartment.
1. Use the function selector to set a suitable type of
heating.
a lights up in the display and the core temperature
display appears next to the temperature of the cook-
ing compartment.
2. Use the or button to set the core temperature.
The current core temperature of the food is shown
on the left, while the set core temperature is shown
on the right, e.g. 15°C|75°C.
Note:The current core temperature only appears
once it reaches 10°C.
3. Use the temperature selector to set the temperature
of the cooking compartment.
Set the cooking compartment temperature at least
10°C higher than the core temperature.
Do not set the cooking compartment temperature to
higher than 250°C.
aThe appliance starts heating after a few seconds.
aOnce the food reaches the core temperature, an
audible signal sounds and, in the display, the cur-
rent core temperature is equal to the set core tem-
perature, e.g. 75°C|75°C.
4. WARNING‒Risk of burns!
The cooking compartment, accessories and meat
probe become very hot.
▶Always use oven gloves to remove hot accessor-
ies and the meat probe from the cooking com-
partment.
When the core temperature is reached:
‒Switch off the appliance.
‒Pull the meat probe out of the socket in the
cooking compartment.
‒Pull the meat probe out of the food remove it
from the cooking compartment.

Programme en
15
11 Programme
The programmes help you to use your appliance to
prepare different dishes by selecting the optimum set-
tings automatically.
11.1 Cookware for programmes
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300°C.
Glass or glass ceramic cookware is best. The joint
should cover approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡Bright, shiny aluminium
¡Unglazed clay
¡Plastic or plastic handles
11.2 Programme table
The programme numbers are assigned to specific foods.
No. Food Cookware Weight range
Weight setting
Add liquid Shelf
posi-
tion
Information
01 Pizza, thin base
Frozen, prebaked
Universal pan with
greaseproof paper
0.28 - 0.4kg
Total weight
No 3 For a second pizza,
follow the instructions
on the packaging
02 Pizza, deep-pan
Frozen, prebaked
Universal pan with
greaseproof paper
0.28 - 0.6kg
Total weight
No 3 For a second pizza,
follow the instructions
on the packaging
03 Lasagne
Frozen
Original packaging 0.3 - 1.2kg
Total weight
No 3 -
04 Chips
Frozen
Universal pan. 0.2 - 0.75kg
Total weight
No 3 Spread out beside
each other on the uni-
versal pan
05 Prebaked bread rolls
Frozen, prebaked
Universal pan with
greaseproof paper
0.1–0.8kg
Total weight
No 3 -
06 Potato gratin Ovenproof dish
without lid
0.5–3.0kg
Total weight
No 2 -
07 Pasta bake
With precooked pasta
Ovenproof dish
without lid
0.4 - 3.0kg
Total weight
No 2 -
08 Baked potatoes,
whole
Unpeeled, starchy
potatoes
Universal pan 0.3–1.5kg
Total weight
No 3 -
09 Vegetable stew
Vegetarian
Deep roasting dish
with lid
0.5–2.5kg
Total weight
As per recipe 2 Cut vegetables that
take longer to cook
(e.g. carrots) into
smaller pieces than
vegetables that take
less time to cook
(e.g. tomatoes)
10 Meat stew Deep roasting dish
with lid
0.5–3.0kg
Total weight
As per recipe 2 Do not sear the meat
beforehand
11 Goulash
Beef or pork, diced
with vegetables
Deep roasting dish
with lid
0.5–2.5kg
Total weight
As per recipe 2 Place the meat at the
bottom and cover
with vegetables
Do not sear the meat
beforehand
12 Fish, whole
Ready to cook,
seasoned
Roasting dish with
lid
0.3–1.5kg
Weight of fish
Cover the
bottom of the
roasting dish
2 -

en Programme
16
No. Food Cookware Weight range
Weight setting
Add liquid Shelf
posi-
tion
Information
13 Chicken, unstuffed
Ready to cook,
seasoned
Roasting dish with
glass lid
0.6 - 2.5kg
Chicken weight
No 2 Place in the cook-
ware with the breast
facing up
14 Chicken pieces
Ready to cook,
seasoned
Roasting dish with
lid
0.1–0.8kg
Weight of the
heaviest piece
Cover the
bottom of the
roasting dish
2 -
15 Turkey breast
Whole, seasoned
Roasting dish with
glass lid
0.5–2.5kg
Turkey breast
weight
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 -
16 Duck, unstuffed
Ready to cook,
seasoned
Roasting pan
without lid
1.0 - 2.7kg
Duck weight
No 2 -
17 Goose, unstuffed
Ready to cook,
seasoned
Roasting pan
without lid
2.5 - 3.5kg
Goose weight
No 2 -
18 Pot-roasted beef
E.g. prime rib,
shoulder, rump or mar-
inated beef roast
Roasting dish with
lid
0.5–2.5kg
Weight of meat
Almost cover
the meat with
liquid
2 Do not sear the meat
beforehand
19 Sirloin, medium
Ready to cook,
seasoned
Roasting pan
without lid
0.5–2.5kg
Weight of meat
No 2 Place in the cook-
ware with the fatty
side up
Do not sear the meat
beforehand
20 Beef roulades
Stuffed with vegetables
or meat
Roasting dish with
lid
0.5–2.5kg
Total weight of all
of the stuffed roul-
ades
Add stock or
water, for ex-
ample, to the
dish until the
roulades are
almost
covered
2 Do not sear the meat
beforehand
21 Meat loaf, fresh
Minced beef, pork or
lamb
Roasting dish with
lid
0.5–2.5kg
Weight of the joint
No 2 Do not sear the meat
beforehand
22 Leg of lamb, medium
Boned, seasoned
Roasting dish with
lid
0.5–2.5kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Do not sear the meat
beforehand
23 Leg of lamb, well-
done
Boned, seasoned
Roasting dish with
lid
0.5–2.5kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Do not sear the meat
beforehand
24 Joint of veal, marbled
E.g. saddle or topside
Roasting dish with
lid
0.5–3.0kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Do not sear the meat
beforehand

Programme en
17
No. Food Cookware Weight range
Weight setting
Add liquid Shelf
posi-
tion
Information
25 Joint of veal, lean
E.g. tenderloin or eye
Roasting dish with
lid
0.5–2.5kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Do not sear the meat
beforehand
26 Leg of roe venison
Boned, seasoned with
salt
Roasting dish with
lid
0.5–2.0kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 -
27 Rabbit, whole
Ready to cook,
seasoned
Roasting dish with
glass lid
1.0 - 2.5kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 -
28 Pork neck joint
Boned, seasoned
Roasting dish with
glass lid
0.5–3.0kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Do not sear the meat
beforehand
29 Joint of pork, with
crackling
E.g. shoulder,
seasoned, and scored
rind
Roasting dish with
glass lid
0.5–3.0kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Place in the cook-
ware fatty side up;
salt the rind well
30 Pork tenderloin steak
Seasoned
Roasting dish with
glass lid
0.5–2.5kg
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250g ve-
getables if re-
quired
2 Do not sear the meat
beforehand
11.3 Preparing food for the programme
Use fresh and, ideally, chilled food. Use frozen food
straight from the freezer.
1. Weigh the food.
The weight of the food is required in order to cor-
rectly set the programme.
2. Add the food to the cookware.
3. Place the cookware onto the wire rack.
Always place the cookware into the cooking com-
partment while it is cold.
11.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡You can set the weight only in the intended area.
¡After the programme starts, you can no longer
change the programme and the weight.
1. Use the function selector to set Programme ⁠.
2. Use the or button to set the required pro-
gramme.
3. Use the temperature selector to set the weight of
your food. Always set the next higher weight.
‒To call up the programme's cooking time, press
the button. The cooking time cannot be
changed.

en Childproof lock
18
‒For some programmes, the button can be
used to delay the end.
→"Setting the end time", Page13
aAfter a few seconds, the programme starts and the
cooking time counts down.
aIf the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
4. When the programme ends:
‒Press any button to end the audible signal pre-
maturely.
‒To set a cooking time for further cooking, press
the button. The appliance continues to heat
using the programme settings.
‒When your food is ready, switch off the appli-
ance.
12 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note:You can go to the basic settings →Page18 to
specify whether you want the option to set the child-
proof lock.
12.1 Activating and deactivating the
childproof lock
Requirement:The function selector must be set to the
"Off" position ⁠.
▶To activate the childproof lock, press and hold the
button until appears in the display.
‒To deactivate the childproof lock, press and hold
the button until goes out in the display.
13 Sabbath mode
You can set a time of over 70hours using Sabbath
mode. You can use Top/bottom heating to keep food
warm between 85°C and 140°C during this time
without having to switch the appliance on or off.
13.1 Starting Sabbath mode
Notes
¡If you open the appliance door during operation, the
appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
¡Once it has started, you can no longer change or in-
terrupt Sabbath mode.
¡You cannot delay the end time for Sabbath mode.
Requirement:Sabbath mode is activated in the basic
settings.
→"Basic settings", Page18
1. Use the function selector to set the programmes ⁠.
a appears in the display.
2. Use the temperature selector to set the temperature.
3. Press the button repeatedly until is highlighted
on the display.
4. Use the or button to set the time.
aAfter a few seconds, the appliance starts heating
and the cooking time counts down.
5. Once the time has elapsed, the display shows the
time as zero. The appliance stops heating up and
responds again as usual outside of Sabbath mode.
‒Switch off the appliance.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
14 Basic settings
You can configure the appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
⁠ ⁠ Signal duration upon completion of a time or
timer period
= 10 seconds
= 30 seconds1
= 2 minutes
⁠ ⁠ Waiting time until a setting is applied = 3 seconds1
= 6 seconds
= 10 seconds
1Factory setting (may vary according to model)
2Depending on the appliance specifications

HomeConnect en
19
Display Basic setting Selection
⁠ ⁠ Button tone when pressing a button = off
= on1
⁠ ⁠ Brightness of the display illumination = dark
= medium1
= bright
⁠ ⁠ Time display = hide the time
= display the time1
⁠ ⁠ Childproof lock can be adjusted = no
= yes1
= yes, with locked door
⁠ ⁠ Interior lighting during operation = no
= yes1
⁠ ⁠ Cooling fan run-on time = short
= medium1
= long
= extra-long
⁠ ⁠ Telescopic shelves retrofitted2 = no 1 (for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
⁠ Sabbath mode available = no1
= yes
⁠ Automatic rapid heating from 200°C2 = no
= yes1
⁠ Reset all values to factory settings = no1
= yes
.. HomeConnect Settings →"HomeConnect ", Page19
1Factory setting (may vary according to model)
2Depending on the appliance specifications
14.2 Changing basic settings
Requirement:The appliance is switched off.
1. Press and hold the button for approximately
fourseconds.
aThe first basic setting appears in the display,
e.g. ⁠ ⁠ ⁠ ⁠.
2. Use the temperature selector to change the setting.
3. Use the or button to switch to the next basic
setting.
4. To save the changes, press and hold the button
for approx. fourseconds.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
14.3 Discarding changes to the basic
settings
▶Turn the function selector.
aAll changes are discarded and not saved.
15 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡Please consult the documents supplied by
HomeConnect.
¡Please also follow the instructions in the HomeCon-
nect app.
Notes
¡Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡In networked standby mode, the appliance requires
a maximum of2W.

en HomeConnect
20
15.1 Setting up HomeConnect
Requirements
¡The appliance is connected to the power supply and
is switched on.
¡You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1. Download the HomeConnect app.
2. Open the HomeConnect app and scan the follow-
ing QR code.
3. Follow the instructions in the HomeConnect app.
15.2 HomeConnect Settings
You can adjust the settings and network settings for HomeConnect in the basic settings for your appliance.
Setting Selection or display Explanation
Connection to the network
– Not connected
– Connect automatically
– Connect manually
– Connected
and are displays that you cannot set.
Connection to the HomeConnect
app
– Ready
– Connect
– Connected
and are displays that you cannot set.
Wi-Fi
– Off
– Activate
– On
If Wi-Fi is activated, you can use HomeConnect.
In networked standby mode, the appliance requires a max-
imum of 2W.
is a display that you cannot set.
Remote start
– Deactivated
– Manual1
– Permanent
When remote start is deactivated, you can only view the oper-
ating status of the appliance in the app.
For manual remote start, you must activate the remote start
each time before you can start the appliance via the app. If
you open the appliance door within 15minutes of activating
remote start or of the operation ending, remote start is deactiv-
ated.
For permanent remote start, you can start and operate the ap-
pliance remotely at any time.
Software update
– Update available
– Start update
The setting is only displayed if an update is available.
is a display that you cannot set.
Remote Diagnostics
– Not authorised1
– Authorised
The setting is only displayed if after-sales service is attempting
to access the appliance.
1Factory setting