Sievert PMPX User manual

CONTENTS GUIDE
MANUAL KITS
Kit code
Regulator
Hose Length, m
Hand le
Neck tube
Burner
PMPX
S305401
4
S3486
S3511
S2941
PMPTBX
S305401
4
S3486
N/A
S3524
PMPHX
N/A
4
S3486
S3511
S2941
P9NFT670X
S305401
4
S3486
S3501
P8842
P3444KITX
S305401
4
S3444*
N/A
N/A
P3444KIT10X
S305401
10
S3444*
N/A
N/A
P3460KITX
S305401
4
S3460*
N/A
N/A
P3460KIT10X
S305401
10
S3460*
N/A
N/A
P9RFMAN1X
S306111
4
S3488
S3510
S2944
P9RFMAN2X
S306111
4
S3488
S3506
2 x S2944
AUTOMATIC KITS
Kit Code
Regulator
Hose length, m
Handle
Combined burner & neck
PAUTOKITX
S305401
4
S3366
S3343
P3366KITX
S305401
4
S3366
S335302
P3366KIT10X
S305401
10
S3366
S335302
P9PGKIT01
S309121
2
S3366
S3351-01
P9PGKIT02
S306311
4
S3366
S3351-01
*The S3444 & S3460 are complete handle, neck tube &
burner and are non-interchangeable.
Regulator spec: S305401 1.5-4bar; S306111 1-4bar adjustable
S309121 2bar fixed; S306311 1-4 bar adjustable with HFV
Torch Kit
Instructions
Sievert UK Ltd,
Bridge Street, Holloway Bank,
Wednesbury, West Midlands. WS10 0AW
Tel: [phone] Fax: [phone]
email: [e-mail]
Web: www.sievertuk.co.uk

Congratulations on purchasing your Sievert torch kit. You have
purchased a first class product, and used correctly it will serve
you for many years to come. Please read these instructions first,
to ensure the maximum lifetime for your equipment. You will
need to purchase either an 11kg, 19kg or 47kg Propane cylinder
from your local LPG dealer.
Assembly
Ensure all parts are in good condition. Ensure all bull nose
connections are clean & undamaged. Tighten all connections
with spanners. (PMPX, PMPHX, P9RFMAN1X & P9RFMAN2X -
Check that the necessary washers are in place and are in good
condition)
Connection to a gas supply
Make sure the torch control valve and the cylinder valve are
turned off. Connect to a suitable gas cylinder and tighten all
connections with spanners. Open the cylinder valve and if fitted
press the black button on the Hose Failure Valve to charge the
system. Check for leaks with leak detecting fluid. Do this every
time the equipment is used.
NEVER CHECK FOR LEAKS USING A NAKED FLAME
Operation
Single valve torches: With a match or lighter ready, open the
torch control valve to allow a small flow of gas and light the edge
of the burner. (Newly assembled systems may take a few
moments to light due to air in the pipe) Once the burner is lit, the
control valve can be opened to allow the required level of flame.
Double valve torches: With a match or light ready, open the large
main valve and then open the smaller pilot valve. Light the
burner and adjust the pilot flame to the desired size. NB it must
not be sooty. Pull the trigger and adjust the main flame to the
desired size with the larger main valve. When the trigger is
released the flame returns to the “pilot flame” size.
To shut off the torch, first close the cylinder valve allowing the
flame to die. NB. This may take a while depending on the length
of hose or the burner in use. Then close the torch control valve(s)
Disassembly and Storage
With the cylinder valve closed, disconnect the torch kit from the
cylinder. Never transport the cylinder with the torch kit attached.
Safety Instructions
Always use and store in a well ventilated area, ensuring that
there is an adequate permanent ventilation. Never use or store
a cylinder below ground. Site the cylinder away from any heat
source. Always use, store and transport the cylinder in the
upright position.
Fire
In the event of a fire, keep the cylinder upright, if possible turn
off the cylinder valve and extinguish the fire using a dry powder
extinguisher. Never use a water jet on an LPG fire. If in any
doubt, move all people away from the area and call the fire
brigade.
Servicing and maintenance
Check the kit regularly and maintain in a clean and undamaged
condition. The kit must be maintained by a responsible person.
If in any doubt, consult your equipment supplier for advice,
spares or repair.
Advice or problems
For further advice we can be contacted by telephone on 0121
506 1818 or by email [email protected]
Please keep these instructions for future reference.