Sigma mobile X-treme PQ39 User manual

Smartphone X-treme PQ39
User manual

Dear Client! Thank you for purchasing Sigma
mobile product!
Please read this manual before using the device to ensure safe and proper use and
prevent it from damages.
Software, design features and content of manual may be changed to improve the
product without a prior notice.
Manufactures and distributors are not liable for case damages as well as the
damages caused due to incorrect or improper exploitation.
WARNING!
This phone is water- and dust-resist under standard IP68.
This means water resistance (device was tested according
to the standard IP68 without impurities in pure water) and
protection from dust. This protection is guaranteed
provided tightly closed caps that cover the SIM card slot
and USB Type-C and Audio connectors
The standard does not provide shock resistance.
Telephone, with additional strong seals and fastenings
have higher rates of vibrating stability but requires careful
use.
Be careful with phone plugs and follow general safety.
If the moisture in your phone is not due to factory defects
and mechanical damage or loose plugs closed - warranty of
the device will not be done.

Package Contents:
Smartphone Sigma mobile X-treme PQ39
Network charger
USB Type C cable
Headset
Manual
Warranty Card
Size: 169*86*16 mm
The manufacturer reserves the right to change complement, specifications and
appearance.
Specifications
Android™ 7.0
Popular operating system for smartphones, the
ability to install applications.
Screen
5.5” resolution 1920*1080.
CPU
МТК6753, 8 cores to 1.3 GHz*.
Camera
13 Megapixel on the back and 5 Megapixel on the
front side of device to take photos and record
video.
Memory
Operational –3 GB, built –32 GB**. The possible
storage extension by micro-SD cards up to 32 GB.
Dual SIM, 3G, LTE
2 SIM cards that support 3G technology and LTE –
for using Internet and to make calls.
WI-FI 802.11 B/G/N
Connection Interface to the wireless network
GPS
The ability to determine the location and to use
navigation programs.
Battery
9000 мАh., built-in
* The frequency of the processor program may be limited to lower values.
** The actual memory size may be less due to the pre-installed operating
system and applications.

Content
Safety and security .................................................................................................. 5
Headset usage.................................................................................................... 5
Start......................................................................................................................... 5
Buttons and ports............................................................................................... 6
Standby mode .................................................................................................... 6
Button to additional menu ................................................................................. 7
Connection to 3G/4G network ........................................................................... 7
Indicator icons.................................................................................................... 7
Charging the battery .......................................................................................... 8
Installing a SIM-card and memory card.............................................................. 9
Main techniques .................................................................................................... 10
Touchscreen usage........................................................................................... 10
Account settings............................................................................................... 13
Files transferring .............................................................................................. 14
Device securing ................................................................................................ 14
Settings.................................................................................................................. 15
Connections ..................................................................................................... 15
Device............................................................................................................... 17
Personal ........................................................................................................... 18
System.............................................................................................................. 20
Connection ............................................................................................................ 21
Phone ............................................................................................................... 21
Contacts ........................................................................................................... 22
Messaging ........................................................................................................ 23
Programs ............................................................................................................... 24
Internet ............................................................................................................ 24
Email ................................................................................................................ 24
Camera............................................................................................................. 25
Gallery .............................................................................................................. 26
Google™ programs ........................................................................................... 27
Troubleshooting .................................................................................................... 28

SAFETY AND SECURITY
Do not disassemble device and do not repair it by yourself.
Permitted outside temperature operating mode: -20 to 50*C.
Storage temperature:-5 to +45*C.
Relative humidity: 5% to 90%, non-condensing (25 ° C).
Avoid the contact with fire to avoid explosion or fire.
Do not expose the device or the battery to very cold or very hot temperatures.
Do not drop device and avoid its hitting by other objects.
Do not expose the smartphone to the heavy mechanical impact.
Avoid contacts with sources of electromagnetic radiation.
For cleaning device do not use chemicals or cleaning means; always turn the
device off before cleaning.
Do not disconnect device from the PC while formatting and copying files.
When using the device as a removable disk always follow the instructions. Any
false step may lead to loss of files.
Create a backup copy of important data on the PC, as the device repair or other
causes may result the data loss.
Use only accessories recommended by the manufacturer.
To avoid of getting heavy metals, acids, lye in water or soil, causing significant
damage to the environment, utilize used battery according to the law. The legal
liability arises in case of infraction about the utilization norms.
The phone does not contain harmful substances
The spent battery pack at the end of service life, dispose of in accordance with
law. With the failure of the legislation on the disposal of legal liability arises.
Headset usage
For safety do not use headset while driving the car or bicycle.
Reduce the volume passing roadway.
Using the headset, do not listen to music at a high volume for a long time –
reversely, it may lead to the hearing problems.
Stop using the headset or reduce the volume if you hear the ringing in ears.
START
Turn on: Press and hold a few seconds power button. Wait for the download process
and lock screen appearance.

Turn off: Press and hold for four seconds power button until the switching off
interface appears. Choose the button, which confirms the switching off. The device
turns off
Buttons and ports
1
nanoSIM/microSD slot
7
Front camera
2
Power on/off
8
Audio 3.5mm port
3
USB Type-C
9
Main camera
4
Camera (press and hold to
open Camera)
10
Flash / Torch
5
Volume
11
Fingerprint scanner
6
Light sensor
12
Hole of membrane of
pressure
Standby mode
In operation mode the short pressing on the power button leads the device to the
standby mode, the screen goes dark.
The repeated short pressing on the power button leads the device out from the
standby mode; the lock screen is showed on the display.

To unlock the screen, you may swipe from the bottom in any part of the screen.
It is possible to protect yourself from unauthorized access in several ways:
- Locking by the graphical key;
- Locking by the password or PIN;
- Locking by fingerprint
Button to additional menu
On the main screen and in the different programs might be the icon .
By pressing on it, the additional menu is opened for additional configuration and
management.
Connection to 3G/4G network
To activate 3G/4G* insert SIM-card of mobile operator in special slot on the
smartphone. Only after these actions turn on the phone, search 3G signal appears
automatically.
* Turn off the connection to Wi-Fi before running the 3G function (if the phone was
connected via Wi-Fi).
Attention: To avoid SIM-card damages turn off the phone before changing and removing SIM-card. Use standard
SIM-cards accurately (SIM/Micro-SIM). It is not recommended to use SIM-cards adapter. Insert and remove the
SIM-card without effort. Mechanical damage is not a guarantee case.
Indicator icons
The icons displayed at the top of the screen provide information about the status
of the device. The icons listed in the table below are most common.
No signal
Signal strength
Roaming (outside of normal service area)
GPRS network connected
EDGE network connected
UMTS network connected

HSDPA network connected
HSPA+ network connected
Wi-Fi connected
Bluetooth feature activated
GPS activated
Call in progress
Missed call
Synced with the web
New text or multimedia message
Alarm activated
Mute mode activated
Vibration mode activated
Flight mode activated
Error occurred or caution required
Battery power level
Charging the battery
Charge the battery before using it for the first time.
Use only Sigma mobile approved chargers, batteries, and cables. Unapproved
chargers or cables can cause the battery to explode or damage the device.
When the battery power is low, the battery icon appears as empty.

If the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to charge
for a few minutes before turning on the device.
If you use multiple apps at once, network apps, or apps that need a connection
to another device, the battery will drain quickly. To avoid losing power during a
data transfer, always use these apps after fully charging the battery.
Charging steps
Connect the USB cable to the USB power adaptor, and then plug the end of the USB
cable into the multipurpose jack.
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
The device may be used while charging; in that case charging time is prolonged.
If the device receives an unstable power supply while charging, the touchscreen
may not function. If this happens, unplug the charger from the device.
While charging, the device and the charger may heat up. This is normal and should
not affect the device’s lifespan or performance. If the battery gets hotter than usual,
the charger may stop charging.
If the device is not charging properly, take the device and the charger to a Sigma
mobile Service Centre.
After fully charging, disconnect the device from the charger. First unplug the charger
from the device, and then unplug it from the electric socket. To save energy, unplug
the charger when not in use. The charger does not have a power switch, so you
must unplug the charger from the electric socket when not in use to avoid wasting
power. The charger should remain close to the electric socket and easily accessible
while charging.
Installing a SIM-card and memory card
Install the SIM card (nanoSIM format) provided by the mobile operator and, if
necessary, a microSD card.

1. Remove the tray that has SIM and microSD cards installed.
2. Insert the SIM card and, if necessary, a microSD card.
Attention! It is possible to use either two SIM cards or one SIM card and microSD card at the same time.
Do not insert the memory card into the SIM card slot. If the memory card is stuck in the SIM card slot,
contact the authorized Sigma mobile service center for safe removal. Be careful not to lose your SIM card
and do not let others use it. Sigma mobile is not liable for any damage or inconvenience caused by the
loss or theft of the cards.
3. Place the tray in the
appropriate slot and secure it.
Your device accepts memory cards with maximum capacities of 32 GB.
Depending on the memory card manufacturer and type, some memory cards
may not be compatible with your device.
Some memory cards may not be fully compatible with the device. Using an
incompatible card may damage the device or the memory card, or corrupt the
data stored in it.
Use caution to insert the memory card right-side up.
The device supports the FAT and the exFAT file systems for memory cards. When
inserting a card formatted in a different file system, the device asks to reformat
the memory card.
Frequent writing and erasing of data shortens the lifespan of memory cards.
Attention! Take a look at the two ways of using the memory card that will be
proposed, after turning on the smartphone. Choose the best suited variant.
MAIN TECHNIQUES
Touchscreen usage
It is recommended to use fingers when you use the touchscreen.

Attention! Do not allow the touchscreen to come into contact with other electrical devices. Electrostatic
discharges can cause the touchscreen to malfunction. To avoid damaging the touchscreen, do not tap it with
anything sharp or apply excessive pressure to it with your fingertips. The device may not recognize touch inputs
close to the edges of the screen, which are outside of the touch input area. Leaving the touchscreen idle for
extended periods may result in afterimages (screen burn-in) or ghosting. Turn off the touchscreen when you do
not use the device.
Operate with fingers
Tapping
To open an app, to select a menu item, to press an on-screen button, or to enter a
character using the keyboard on the screen, tap it with your finger.
Tapping and holding
Tap and hold an item or the screen for more than 2 seconds to access available
options.
Dragging
To move an item, tap and hold it and drag it to the target position.
Double-tapping
Double - tap on a webpage or image to zoom in. Double –tap again to return.
Swiping
Swipe to the left or right on the Home screen or the Apps screen to view other
panels. You may swipe upwards or downwards to scroll through a webpage or a list
of items such as contacts.
Spreading and pinching
Spread two fingers apart on a webpage, map, or image to zoom in a part. Pinch to
zoom out.
Screen turning
Many programs support the interface displaying in landscape or portrait format. If
the device turns, the display turns automatically according to the new screen
position.
Open notification panel and cancel the option Screen turning if you do not want the
screen to turn.
Attention! Some programs do not support the Screen turning option. Some programs display different screen
positions depends on the device position.
Notifications
When you receive new notifications, such as messages or missed calls, indicator
icons appear on the status bar. To see more information about the icons, open the
notification panel and view the details. To open the notification panel, drag the

status bar downwards. To close the notification panel, swipe upwards on the
screen. Scroll down to see additional notifications.
On the notifications panel you may view current device settings
Settings : switch to device settings
Wi-Fi: Wi-Fi function on/off
Connection data: on/off mobile data
Battery
Do not disturb function switch
Bluetooth: on/off Bluetooth
Flight mode: on/off Flight mode
Screen Rotation: on/off automatically screen rotation
Torch: on/off Torch
Location: on/off GPS function
Adjust the screen brightness Home screen
Home screen is the starting point for accessing all of the device’s features. It displays
widgets, shortcuts to apps, and more. To view other panels, swipe to the left or
right.
Objects managing
Moving items
Tap and hold an item on the Home screen, and then drag it to a new location. To
move the item to another panel, drag it to the side of the screen.
Removing items
Tap and hold an item, and then drag it to remove at the top of the screen. When
the basket is red, let it off.
Folder usage
You can combine multiple shortcuts in folders on the home screen.
On the Home screen, tap and hold an app, and then drag it over another app. Drop
the app when a folder frame appears around the apps. A new folder containing the
selected apps will be created.
To move apps from a folder to the Home screen, tap the folder, and then drag an
app to the Home screen.
To delete apps in a folder, tap the folder, and then drag the app you want to delete
to Remove at the top of the screen.
To rename the folder, tap the name.

Panels managing
Adding new panel
New panel is added automatically when the new object is added beyond the existing
panels.
Moving the panel
On the Home screen, tap and hold an empty area to add, move, or remove a panel.
Delete the panel
In order to delete the panel, delete first all of the objects of its panel. And the
panel will be removed automatically.
Background settings
Setting pictures and photos, saved on the device, as a background for home screen.
1.Press and hold empty space on the home screen and then press Wallpapers.
2.Swipe left or right and chose one of the proposed pictures, showed down the
screen. To choose the photo, made by the camera, or other images press Choose
image.
3.Choose the necessary image, change the frame (as you wish) and install as a
wallpaper.
Widgets usage
Widgets –are the short programs, because of them a lot of small functions places
on the home screen. In order to use them, add widgets to the home screen.
Attention! Some widgets are connected to network. The usage of web-widget may lead to additional costs.
The widgets availability depends on country or mobile operator.
On the home screen press and hold empty space and then press Widgets.
Scroll left and right on the widget panel and then touch and hold widget to add it to
the home screen. Place it on the proper place, change size by dragging (if you wish)
and then touch any part of screen to save the widget location.
Account settings
You need Google™account to use Google programs such as Play Store, Gmail and
ext. Create Google account for using all phone possibilities.
Adding accounts
To set up Google account follow the instructions, which are displayed when the
Google is opened without signing in.

To enter the system by the Google account or register Google account touches the
program menu - Settings → Accounts →Add account→ Google. It is possible
to use a few Google accounts.
Removing accounts
On the program menu press Settings → Accounts, choose the account that should
be removed then press → Remove account.
Files transferring
Transferring of the audio, video, images and other file types from the device to
computer and reversely.
Connecting with Windows media player
Make sure that Windows media player is installed on your computer.
1. Connect the device to computer by USB-cable.
2. Open the record player Windows and synchronize music files.
Connecting as a media device
1. Connect the device to the computer using the USB cable.
2. Open the notifications panel, and then tap Connected as a media device → Media
device (MTP).
Tap Camera (PTP) if your computer does not support Media Transfer Protocol (MTP)
or not have any appropriate driver installed.
3. Transfer files between your device and the computer.
Device securing
Prevent others from using or accessing personal data and information stored in the
device by using the security features. The device requires an unlock code whenever
unlocking it.
Setting a pattern
On the Applications screen, tap Settings → Security → Lock
screen → Pattern.
Draw a pattern by connecting four dots or more, and then draw
the pattern again to verify it.
Set a backup unlock PIN to unlock the screen when you forget the pattern.
Setting a PIN
On the Applications screen, tap Settings → Security → Lock screen → PIN.

Enter at least four numbers, and then enter the password again to verify it.
Setting a password
On the Applications screen, tap Settings → Security → Lock screen → Password.
Enter at least four characters including numbers and symbols, and then enter the
password again to verify it.
Setting a Fingerprint lock
This phone has the ability to set up protection with a fingerprint scanner.
On the Applications screen, tap Settings → Security→Fingerprint for settings. You
will need to scan one or more fingerprints and specify a backup method for locking
the screen. When you set the fingerprint every time you unlock it, you will need to
touch the fingerprint sensor to unlock the phone.
SETTINGS
Use this application to configure the device, set application options, and add
accounts.
Tap Settings on the Applications screen.
Connections WI-FI
Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or
other network devices.
To use options, tap :
• Add network –adding WI-FI network;
• Saved network –saved networks list;
• Update –update list networks;
• Additional settings:
1) Network notifications (switch) –available networks notifications;
2) Scan for Nearby Devices: Search for devices that have media sharing activated,
even with Wi-Fi mode off;
3) WI-FI in the sleep mode –3 variants:
- Do not turn off;
- Only with power connection;
- Always turn off.
4) Certificate installing;
5) WI-FI Direct –searching and connection to devices that support this technology;
6) WPS button - WPS-router connection;

7) Enter by PIN-code with WPS;
8) MAC-address and IP-address.
After all installation is done, icon of connection with the wireless network appears
at the top of the screen
Bluetooth
Use Bluetooth to exchange data or media files with other Bluetooth-enabled
devices. To use other options, press
SIM cards
Enable / disable SIM cards, configure the card by default for:
Getting mobile data
Calls
Message
Data usage
Keep track of your data usage amount, and customize the settings for the limitation.
Mobile data: Set the device to use data connections on any mobile network.
Set mobile data limit: Set a limit for the mobile data usage.
To use more options, tap .
Restrict background data: Set the device to disable sync in the background while
using a mobile network.
Wi-Fi usage: Set the device to show your data usage via Wi-Fi.
More
Airplane mode
This disables all wireless functions on your device. You can use only non-network
services.
Tethering
Mobile hotspot: Use the portable Mobile hotspot to share the device’s mobile
network connection with computers or other devices through the Wi-Fi network.
USB tethering: Use USB tethering to share the device’s mobile network connection
with a computer via USB. When connected to a computer, the device is used as a
wireless modem for the computer.

Bluetooth tethering: Use Bluetooth tethering to share the device’s mobile network
connection with computers or other devices via Bluetooth.
VPN
Set up and connect to virtual private networks (VPNs).
Cellular networks
Mobile data: Use to allow packet switching data networks for network services.
Data roaming: Set the device to use data connections when you are roaming.
Access Point Names: Set up access point names (APNs).
Network mode: Select a network type.
Network operators: Search for available networks and manually register a
network.
Device Display
Screen settings:
Miravision for display picture quality optomozation
Wallpaper
Brightness level
Time for activating sleep mode
Font size
Screen Rotation
Cast. For broadcast screen to other devices
Notification
Application setting to show notification
Sound
Review and files configure: tunes and its volume for different kinds of notifications,
vibration on/off, key sound and ext. Storage
The memory displaying installed in the device: total amount and free space.
Battery
Battery usage is showed in this menu, power saving mode on/off.
Memory
Displaying the application usage of the RAM

Apps
There is program list installed in the device. If any program is touched, the additional
features appear available for it:
Turn off
Delete
Force stop
Clear the data
Attention! Standard programs that come with device cannot be deleted. Also, some downloaded
applications and some standard programs cannot be deleted. All the out-of-work programs no longer are
displayed, but still saved in memory, in case of using this functions.
Intelligent assistant
Additional special functions settings, which make phone controlling simpler. These
include:
Smart somatosensory. Settings for controlling the phone without touching the
screen: unlocking, scrolling the desktop screens, capturing photos, answering an
incoming call
Gesture motion: off screen gestures for making screenshots, starting camera
and adjust volume
Gesture wake: off screen gestures for waking up the phone, unlocking,
launching applications
Personal Location
The setting changing is for applying to the location information.
Mode: collection of information about the location mode.
Last requests: viewing programs that use information about location and its
battery usage.
Security
There is a changing of security settings of device and SIM- or USIM-card.
Locking the screen. Type setting screen lock
Fingerprint. Setting up screen unlock with fingerprint.
Device administrators: view device administrators, installed on it. Administrators
may be allowed to use on the device new policy.

Unknown sources: permission to install applications from unknown sources.
To encrypt device: set a password to encrypt data stored on the device. Password
must be entered each time when activate the device. Charge the battery before
activate this option, as data encryption takes time more than an hour.
External memory card encryption: files encryption on the device, saved on
memory card. If you reset your device to the factory defaults with this setting
enabled, the device will not be able to read your encrypted files. Disable this
setting before resetting the device.
Setting of SIM-card locking:
–To lock SIM-card: enable or disable the lock option with the help of PIN-
code to request PIN-code before using the device.
–To change the PIN-code of the SIM-card: PIN-code changing that is used for
the access on the SIM-card.
Make password visible: set up passwords displaying while entering it on the
device.
Type of storage: set up the type of storage for account data saving.
Trusted account data: certificate and account data usage to ensure secure use of
various applications.
Certificates installation: to install encrypted certificates stored on USB-drives.
Remove account data: remove account data from the device and reset the
password. Accounts
Manage (adding, editing and ext.) the device account data.
Language and input
Change the settings for text input. Some options may not be available depending
on the selected language.
Language
Language selection will be displayed on the all menus and programs.
Keyboard and input methods
Google keyboard
Number of available options depends on country and operator
Languages: to choose input language
Parameters: various keyboard settings
Text corrections: text checking and correcting according to existing dictionaries.
Gesture typing
Dictionary

Additional settings
Google voice typing
There is changing of the voice command settings.
Languages: language list for texting.
To block offensive words: prohibition against recognizing by the device abusive
words entered by voice data.
Offline speech recognition: downloading and installation of the voice data for
voice input offline. Backup and recovery
Change the settings for managing settings and data.
Back up my data: Set the device to back up settings and app data to the Google
server.
Backup account: Set up or edit your Google backup account.
Automatic restore: Set the device to automatically restore settings and app data
from the Google server when apps are reinstalled.
Reset settings: Return the device’s settings to the factory default settings without
deleting data.
System Date and time
Access and alter the following settings to control how the device displays the time
and date.
If the battery remains fully discharged or removed from the device, the time and
date is reset.
Automatic date and time: Automatically update the time and date when moving
across time zones.
Automatic time zone: Set the device to receive time zone information from the
network when you move across time zones.
Set date: Set the current date manually.
Set time: Set the current time manually.
Use 24-hour format: Display time in 24-hour format.