SignaMax 065-7309POEP-FP User manual

065-7309POEP-FP
8-port 10/100BaseT/TX PoE/PoE+
plus 1 Dual Media
10/100/1000BaseT/TX port Switch
User’s Manual

Overview
The Signamax 065-7309POEP-FP PoE/PoE+ Switch
complies with IEEE 802.3af/at standards, with Power
over Ethernet supplied over Category 5 or better cable
at distances within 100 meters, supporting IEEE
802.3af/at terminal devices as a PoE Power Source
Equiment (PSE). In addition, when a device other than
a PoE Powered Device (PD) is connected to a PoE-
equipped port, the switch will not supply PoE power
to that port, ensuring safety for data-only connections.
This device provides full 30 watt power to all eight
PoE/PoE+-capable ports simultaneously. It has a 1U
rack mount form factor, with the rack mounting
hardware included.
PoE switches supply power and transfer data by
using network cables; network cables do not require a
qualified electrician to install them, and can be located
anywhere, reducing the time and expense of having
electrical power cabling installed.
The Signamax 065-7309POEP-FP is the ideal
choice for those who desire to economically deploy
wireless access points, IP cameras, access control
devices, and IP telephones.

Key features:
•IEEE 802.3af/at Power over Ethernet PoE/PoE+
compliant.
•Supports eight (8) 10/100Mbps Fast Ethernet
10/100BaseT/TX PoE/PoE+ ports with 1 Gigabit
Dual Media uplink port (9 ports total).
•Provides up to 30 watts for each PoE port. (250
watts total power supply).
•Automatically detects presence of and the PoE
Power Class level of a Powered Device.
•3.6 Gbps switching bandwidth. Full wire-speed
non-blocking reception and transmission.
•Forwarding rate:
o1000 Mbps: 1,488,000 pps
o100 Mbps: 148,800 pps
o10 Mbps: 14,880 pps
•Status LEDs:
oSystem power
oPoE
o100 Mbps
oLink / Activity
•Store-and-forward switching method.
•Back pressure Flow Control for Half-Duplex mode.
•IEEE 802.3x Flow Control for Full-Duplex mode.
•Plug and Play.

电 ⼒ 线
PO W+DATA
DATA
User Guide:
1. Check the PoE switch:
1. Please check the enclosure, the RJ-45 ports, and the
LED indicators, making sure they are ok.
2. Connect the PoE switch to AC power, making sure the
initialization of the PoE switch occurs as below:
•POE indicator is off when power is connected.
•POW indicator is on and remains on after
connection to AC power.
•Other indicators will be on, then off after one or
two seconds.
2. Cable connection:
1. Connect the Switch to Computer or other PD (such as
an IP camera or wireless AP) by Cat. 5 or better cables.
2. Connect the external power cord to the Switch and the
power cord to AC plug
3. Turn on the switch
Caution:
1) All operation should be provided only by a qualified
service technician.
2) Make sure the PDs you connected to the Switch are
compliant with IEEE 802.3af or 802.3at.
3) Make sure the power is off before unplugging the AC
power.
4) Makes sure all PoE PDs power consumption is less
than total power
5) Please avoid any heavy thing placed on the Switch.
6) Do not use this product near water, for example, in a
wet basement or near a swimming pool.
7) Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
lightning.
8) For outdoor use, the Switch itself should be housed
inside a protective enclosure.
9) Cutting power during a firmware upgrade can damage
your device.
10) Only use attachments/accessories specified by the
manufacturer.
11) Opening the switch or tampering with the warranty
sticker can void your warranty.

Technical Specifications:
Applicable
Standards
IEEE 802.3i 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000Base–X (via SFP module)
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
Network
ports
10/100 Mbps PoE/PoE+ port (ports 1-8)
10/100/1000 Mbps Uplink (port 9)
10/100M/1000Mbps SFP (shared with port 9)
Speed
PoE/PoE+-capable ports：
：：
：10/100BaseT/TX
High-Speed Uplink Port: 10/100/1000BaseT/TX or 1000Base SFP
Performance
Bandwidth：
：：
：3.6 Gbps
Network delay 100 to 100M bps：
：：
：Max 20 microsecond
Packet buffer memory：
：：
：96 KB
Database size：
：：
：1,024 MAC addresses
Forwarding Rates: 1000 Mbps/ 1,488.000 pps, 100 Mbps / 148,800
pps, 10 Mbps / 14,880 pps
LED indicator Power, PoE, Link / Activity
Power supply Internal 250 Watt power supply
Size
Dimensions: 17.3 x 7.09 x 1.73 in. W x D x H (440 x180 x 44 mm)
Weight：
：：
：6.17 lb. (2.8 kg)
Environment
Operating Temperature: 32°F~104°F (0°C~40°C)
Storage Temperature: 14°F~158°F (-10°C~70°C)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Safety CE/LVD
Certification CE FCC ROHS
Warranty Limited 5-year warranty

Contact Information:
SIGNAMAX, INC


an AESP Company
999 N.W. 159th Drive
Miami, Florida 33169, U.S.A.
Phone: [phone] Fax: [phone]
Sales: 800-446-2377
Tech. Support: 800-446-2377, ext. 201
Http://www.signamax.com
E-mail: [email protected]