SIIG JU-MR0A11-S1 User manual

1
USB 3.0 Internal Bay Multi
Card Reader
Quick Installation Guide
04-0723B
Introduction
The USB 3.0 Internal Bay Multi Card Reader is the
perfect choice for computer users looking for a
multi-format flash memory card reader/writer
that installs into a front drive bay of the computer.
Key Features and Benefits
• Compliant with USB 3.0 Specification
• Front access USB 3.0 port
• Fits into any standard 3.5" drive bay
• Power & Activity LEDs
• Supports SD, SDHC, SDXC, microSD,
MMC, Memory Stick, Memory Stick Pro,
Memory Stick Duo, CF and xD memory
cards

2
System Requirements
• An available internal USB 3.0 20-pin Header
• An available 3.5" drive bay
• Windows® 8 (32-/64-bit) / 7 (32-/64-bit) /
Vista (32-/64-bit) / XP (32-/64-bit) / Server
2003 & 2008 (32-/64-bit) / Server 2008 R2
Package Contents
•USB 3.0 Internal Bay Multi Card Reader
• Mounting screws
• Quick installation guide
Layout
Figure 1: Layout
Power LED
Memory Stick
xD
SD/MMC
CF
microSD/M2
USB 3.0 port
Activity LED
USB 3.0 20-pin connector
(to motherboard)

3
Power LED
This LED will be on whenever the power supply
is supplying power to the motherboard.
Activity LED
This LED will be on when the computer is turned
on and will blink when memory card write
activity is detected.
USB 3.0 Port
A convenient front access USB 3.0 port. Plug any
USB device into this connection.
USB 3.0 20-pin Connector
Plugs into the motherboard's USB 3.0 20-pin
Header. The connector is keyed to ensure proper
insertion into the motherboard's header.
Figure 2: USB 3.0 20-pin Connector
Tab

4
Motherboard's USB 3.0 20-pin Header
The motherboard's USB 3.0 20-pin Header
consists of 19 pins arranged in 2 rows. Make sure
the Cut out on the motherboard's USB 3.0
20-pin Header is aligned with the Tab on the
reader's USB 3.0 20-pin connector, see Figure 2
on page 3 for more information or refer to your
system's users manual for proper installation.
Figure 3: USB 3.0 20-pin Header
Cut out
No pin
Note: Connecting the card reader's USB
3.0 20-pin Connector to your
motherboard's USB 3.0 20-pin Header
improperly will damage your system.
WARNING

5
Hardware Installation
Important:In order for the USB 3.0 Internal Bay
Multi Card Reader to work properly, the driver of
your existing USB 3.0 host adapter must be
installed properly.
1. Turn OFF the power to your computer and
all connected peripheral devices.
2. Unplug the power cord from the back of the
computer.
3. Remove the computer cover.
4. Select an available 3.5" drive bay for
mounting the card reader, remove the cover
plate from the selected drive bay.
5. Secure the card reader to the drive bay by
using the supplied mounting screws.
6. Insert the card reader's 20-pin connector
into the motherboard's USB 3.0 20-pin
Header. Align the Tab on the card reader's
20-pin connector with the Cut out on the
motherboard's 20-pin header and press
firmly, yet gently for a solid connection. See
Figure 5 on page 6.

6
Figure 5: Align the Cut out and the Tab
Driver Installation
Windows will detect and install the drivers for
the USB 3.0 Internal Bay Multi Card Reader
automatically. No additional driver installaton is
needed.
Cut out
Tab
Motherboard's
20-pin header

7
To Verify Windows Installation
1. Check Device Manager to verify successful
installation.
Windows 8 / 7 / Server 2008 R2: Right click
Computer, click Manage, then click Device
Manager.
Windows Vista: Right click Computer, click
Manage, click Continue, then click Device
Manager.
Windows XP / Server 2003 / 2000: Right click
My Computer, click Manage, then click
Device Manager.
Windows Server 2008: Right click Computer,
click Manage, double click Diagnostics,
then click Device Manager.
2. Double click Universal Serial Bus
controllers, USB Mass Storage Device
should be displayed, in addition to others
that may come with your system.
3. Double click Disk drives, Generic Storage
Device... should be displayed five times.

8
Using the Card Reader
To prevent damage to the card reader or memory
card, please read this section.
Inserting Memory Cards
For Memory Stick, MMC, SD, microSD and xD
memory cards, insert with the pins facing forward
and the top label facing up. For CF memory card,
insert with the pins facing forward and the top
label facing down.
Accessing Memory Cards
For Windows 8 / 7 / Server 2008 R2: A Removable
Disk icon will appear in Computer only when a
memory card is inserted into the corresponding
memory card slot. Otherwise, no Removable
Disk icons will appear in Computer. If you prefer
to have the disk icons appear, regardless, follow
the steps below.
1. Double click Computer, click Organize,
click Folder and search options.
2. Select the View tab, uncheck Hide empty
drives in the Computer folder.
3. Click OK to save the changes.

9
For other Windows OS: Five Removable Disk
icons will appear in Computer/My Computer.
To access any one drive, double click the icon that
corresponds to the inserted memory card. The
memory card slots appear in the following order,
CF, xD, SD/MMC, Memory Stick and
microSD/M2 respectively.
Removing Memory Cards
To prevent data loss, data corruption or memory
card failure, do not remove memory cards while
the Activity LED is FLASHING.

10
Blank Page