Silicon Solar AquaJet-Pro-PUMP1224 User manual

Installaon Manual
AquaJet 12-24V Solar Pump
AquaJet-Pro-PUMP1224
Technical Specications
Operating Voltage 12-24V
Pump Lift Height (max) 10.5 ft
Flow Rate (max) 412.1 GPH
Dimensions 5.1” x 3.3” 2.8”
Weight 2.1 lbs
Cable Length 16.5 ft
Silicon Solar
2917 State Hwy 7
Bainbridge, MY 13733
P: 1.800.786.0329
www.SiliconSolar.com
Copyright 1997 - 2015 Silicon Solar | All Rights Reserved | Version 1.0.0
* Prices and specicaons subject to change without noce
Read And Follow All Instrucons Before Operang Your Solar Light. Save This Manual For Future Reference.
1. The brushless water pump is designed for outdoor or indoor fountain
use, and is powered by DC power supply such as solar module,
rechargeable battery or AC/DC adapter etc.
2. While using solar power, the solar module needs to be placed in the
sunlight facing the sun, and the performance of the pump depends on
the sunlight intensity and the angle of incident light.
3. The pump introduces the latest DC brushless motor technology with
maximum longevity
4. The pump has built-in function of dry-run protection. Two sensor
points are provided on the side of the housing for this. The pump
works if these points are under water. If a point projects out of the
water, the pump does not work.
1. Overview
2. Components
1. Pump
2. Nozzle (optional)
3. Floating Disc (optional)

Installaon Manual
AquaJet 12-24V Solar Pump
AquaJet-Pro-PUMP1224
Silicon Solar
2917 State Hwy 7
Bainbridge, MY 13733
P: 1.800.786.0329
www.SiliconSolar.com
Copyright 1997 - 2015 Silicon Solar | All Rights Reserved | Version 1.0.0
* Prices and specicaons subject to change without noce
1. Connect the pump to the related DC power supply.
2. For the application of producing waterfall feature in small garden
water decorations, fit the pump outlet to the water inlet of the
decoration.
3. For the application of creating a small spraying up fountain, just fix the
pump at the base of a basin or small shallow pond etc.
4. Connect the fountain nozzles to the pump outlet tube according to
the above photo; the attached nozzles can produce 2 different jet
shapes.
5. To produce excellent fountain effect, please leave the fountain head
above the water surface using the extension tubes. If these 4pcs of
extension tubes are all used and the pump head is still immerged in
the water, please uplift the pump body somehow.
6. It can easily create a floating fountain by the optional floating disk,
according to the above photo.
7. Make sure to place the pump fully underwater when the pump
operates.
3. Assembly Instructions
1. Any altering of the product itself or changing of the components voids
warranty.
2. Do not connect the pump to any AC voltage power directly; it’s ONLY
for DC voltage power.
3. Operate the pump in freshwater only (never above 40C), especially
keep it away from flammable liquids.
4. The most remarkable feature of the pump is dry protection. The pump
will automatically stop when out of water.
4. Cautions

Installaon Manual
AquaJet 12-24V Solar Pump
AquaJet-Pro-PUMP1224
Silicon Solar
2917 State Hwy 7
Bainbridge, MY 13733
P: 1.800.786.0329
www.SiliconSolar.com
Copyright 1997 - 2015 Silicon Solar | All Rights Reserved | Version 1.0.0
* Prices and specicaons subject to change without noce
If the pump starts losing power or stops working after operating for a certain time, please clean the pump following the steps below
(See the above figures for demonstration):
1. Disconnect the pump.
2. Press on the bottom of the filter housing and meanwhile move the filter housing apart form the pump.
3. Turn the impeller cover together with flow valve clockwise to the end and then carefully pull the impeller cover together with
flow valve apart from the pump.
4. Remove the impeller wheel from the pump.
5. Wash every part to clean the debris.
6. Assemble the pump in reverse sequence.
7. Connect the pump.
*Be careful, never drop down the ceramic axis while cleaning the impeller, it breaks easily.
5. Cleaning And Maintenance
Pump does not operate, please check the potential failures listed below:
1. No connection to the power supply.
2. Impeller is blocked—to clean the pump, remove the front plate and the impeller, and use a brush or water to remove any debris.
3. To be sure the pump is fully submerged in water.
*Pump does operate but there is no water running through the tubes: Clear the tube and the filter to make sure the tube is
through completely.
6. Troubleshooting

Installaon Manual
AquaJet 12-24V Solar Pump
AquaJet-Pro-PUMP1224
Silicon Solar
2917 State Hwy 7
Bainbridge, MY 13733
P: 1.800.786.0329
www.SiliconSolar.com
Copyright 1997 - 2015 Silicon Solar | All Rights Reserved | Version 1.0.0
* Prices and specicaons subject to change without noce
Please Note: performance curves and data will vary due to solar panel not being same as unit tested under our QTC (quality test con-
ditions). This pump is designed for solar panel output in range of 6-9V @ 3-500ma. Warranty on pump for non-Silicon Solar Modules
is only 1 Year.
Solar Panel with Junction/Terminal Box on back
1. Find spade terminal adapter
2. Connect spade terminal adapter to pump male connector
3. Connect spade terminals to Junction/Terminal Box (Size may vary)
Solar Panel Wires Only
1. Cut spade terminal adapter.
2. Splice/Strip Wires
3. Twist wires to same color or same polarities + and –
7. Pump Assembly With Dierent Solar Modules