Silux control Spektra globe User manual

III. What Silux Control®will do to correct any problems:

Silux Control®will repair or replace, at its option, any defective

product free of charge (except for shipping charges for this product).

Silux Control®reserves the right to discontinue any of its products

without notice and disclaims any limited warranty to repair or replace

any such discontinued products.

IV. What is not covered by this warranty

Upon claiming this warranty, all above warranties are null and void if

the purchased Silux Control®product is not returned for an authorized

inspection, at the sole expense of the purchaser, or if Silux Control®

determines that the Silux Control®product has been improperly

installed, altered in any way, or opened/tampered with. The Silux

Control®product warranty does not protect against instances of

uncontrollable natural disasters such as flood, lightning, earthquake,

war, vandalism, theft, normal use wear and tear, erosion, depletion,

obsolescence, physical damage, water damage, damage due to low

voltage disturbances (i.e. brownouts or sags), non-authorized

program, or system equipment modification or alteration.

3. Support

Please visit our website at www.siluxcontrol.com for any other

support, products, future products, and updated user manuals.

4. Disclaimer of Liability

Please read this user manual thoroughly before using the

IntelliHub®. Follow all safety precautions when installing this

product. It is always recommended to use a qualified electrician.

Under no circumstances shall Silux Control®or its associates be

liable for any direct, indirect, incidental, special or consequential

damage that results from the use of or inability to use the Silux

Control®products. By using the IntelliHub®or any other Silux

Control®Automation products, you expressly agree that the use

of these products are at own risk. Neither Silux Control®nor its

affiliates, subsidiaries, or designees nor each of their respective

officers, directors, employees, agents, third party content

providers, designers, contractors, distributors, merchants,

sponsors or licensors can be held responsible for any injury,

death or damages this product might have caused.

OPERATION MANUAL

SC-SPG01

Spektra

Globe

Appendix I:

1. Introduction to Silux Control

2. Introduction to the Collector

3. Applications

4. Electrical Specifications

5. Instructions

I. Installing the Spektra Globe

II. How to Begin Pairing

III. How to pair with Silux Control

Devices

IV. Hubcentric topology

V. Factory Reset

6. Safety precautions

7. Versions, Changes and Updates

8. More Silux Control

automation products

Appendix II:

1. Troubleshooting

2. Warranty

I. What this warranty covers

II. What period does this warranty cover

III. What Silux Control

will do to correct any

problems

IV. What is not covered by this warranty

3. Support

4. Disclaimer of Liability

Appendix I:

1. Introduction to Silux Control

2. Introduction to the Collector

3. Applications

4. Electrical Specifications

5. Instructions

I. Installing the Spektra Globe

II. How to Begin Pairing

III. How to pair with Silux Control

Devices

IV. Hubcentric topology

V. Factory Reset

6. Safety precautions

7. Versions, Changes and Updates

8. More Silux Control

automation products

Appendix II:

1. Troubleshooting

2. Warranty

I. What this warranty covers

II. What period does this warranty cover

III. What Silux Control

will do to correct any

problems

IV. What is not covered by this warranty

3. Support

4. Disclaimer of Liability

Appendix I:

1. Introduction to Silux Control®

PLEASE NOTE: You are not able to connect directly to the

Spektra Globe®.You will be required to connect directly to

the Intellihub®to ensure you can control all devices via the

Intellihub®and Silux Control®app.

The idea behind the Silux Control® automation series is to

have a fully automated lifestyle. No longer will you need to

push a button to switch on appliances or lights; it will simply

be switched on for you with motion, schedules and scenes.

You can schedule your geyser or water heater to turn on

and set it to the temperature you wish. Your irrigation

system can be automated, and so much more can be

controlled. The sky is the limit, and all this under one app,

all controlled from one place. You can create scenes or

even control a couple of appliances from the convenience of

your living room or anywhere across the world using any

smart device running Android or iOS. At Silux Control®, we

tried to keep our products as affordable as possible, without

compromising quality. Our devices are specially designed to

make it as easy as possible to install with easy usability and

a wide range of applications. With encrypted data control,

you are also protected from the outside world, providing you

with peace of mind. We have thought of everything. What

are you waiting for? Install Silux Control®and let us help you

control your world safely, securely, and efficiently.

2. Introduction to the Spektra Globe®

The Spektra Globe® is one of the many useful and wonderful

products that form part of the the Silux Control®automation

series. There are various options available with the Spektra

Globe®including a large color range, sunrise and sunset,

colour cycling and more.The Spektra Globe® can also be

controlled with the Touch Lamina®and the Seeker® which

will be explained at a later stage.

Warning: Please follow all safety precautions when

installing this product. Silux Control®and its

distributors and resellers cannot be held responsible

for any injury or death.

3. Application

The Spektra Globe®was designed to control and set the

mood of your home/office. The Spektra Globe® can be

installed in a lamp or ceiling socket.

4. Electrical Specifications

The Spektra Globe®

Fittings: E27 / B22

Operating Voltages: 110V AC – 230V AC

Frequency Range: 50Hz ~ 60Hz

Maximum Switching Power: 10W

Lumens: 800lm Approx.

Lighting Angle: 120º

Operating Temperatures: -5°C –

60°C

Layout

5. Instructions

I. Installing the Spektra Globe®

1. Please make sure that the power to the socket of the

device you want to control is off.

2. Screw in(E27)/push turn(B22) the globe into the lamp or

ceiling socket.

3. Turn the power of the socket to the device back on.

The device is now ready for pairing

Warning: Please follow all safety precautions when

installing this product. Silux Control®and its distributors

and resellers can not be held responsible for anyinjury

or death.

IntelliHub®

Smart Device

Running

Silux Control®App

5. Instructions

I. Installing the Spektra Globe®

1. Please make sure that the power to the socket of the

device you want to control is off.

2. Screw in(E27)/push turn(B22) the globe into the lamp or

ceiling socket.

3. Turn the power of the socket to the device back on.

The device is now ready for pairing

Warning: Please follow all safety precautions when

installing this product. Silux Control®and its distributors

and resellers can not be held responsible for anyinjury

or death.

Ø33.5

E27 Socket

Ø28

B22 Socket

OFF

II. How to pair with your smart device:

Please remember that the IntelliHub®needs to be installed to

be able to control the Spektra Globe®from your smart

device. Please refer to the user manual of the IntelliHub®for

pairing the Spektra Globe®to your Android or iOS device.

III.How to pair with Silux Control®Devices:

1. Install and power on your Spektra Globe®.

2. Open the Silux Control®app and navigate to “Add

device”.

3. This will begin the discovery process where your

IntelliHub®will search for the Spektra Globe®. Depending

on the environment it could take a few minutes before

your device is discoverable. Once you see your Spektra

Globe® in the list, tap on it to add it.

4. You will be required to scan or type in the QR code to

confirm that the device can be joined to your network.

IV. How to pair with the Touch Lamina®:

1. Open you Silux Control®app and navigate to “Edit

devices” menu.

2. Select the Spektra Globe®you wish to pair and tap the

“Pair” botton. The Spektra Globe®will now be in teach mode.

3. Ensure the Touch Lamina®has power. Press the Teach

button on the Touch Lamina®. The green light on the Touch

Lamina®will start flashing.

4. Tap the button on the Touch Lamina®corresponding to the

Spektra Globe®you wish to pair with this device. The green

light will switch off after successfully paired.

If the green light stays on, the pairing was unsuccessful and

you should wait for 30 seconds for the green light to

go off before trying again.

Please refer to the Touch Lamina®and Seeker®manuals

regarding controlling your Spektra Globe®from network

paired devices.

5. Instructions

I. Installing the Spektra Globe®

1. Please make sure that the power to the socket of the

device you want to control is off.

2. Screw in(E27)/push turn(B22) the globe into the lamp or

ceiling socket.

3. Turn the power of the socket to the device back on.

The device is now ready for pairing

Warning: Please follow all safety precautions when

installing this product. Silux Control®and its distributors

and resellers can not be held responsible for anyinjury

or death.

II. How to pair with your smart device:

Please remember that the IntelliHub®needs to be installed to

be able to control the Spektra Globe®from your smart

device. Please refer to the user manual of the IntelliHub®for

pairing the Spektra Globe®to your Android or iOS device.

III.How to pair with Silux Control®Devices:

1. Install and power on your Spektra Globe®.

2. Open the Silux Control®app and navigate to “Add

device”.

3. This will begin the discovery process where your

IntelliHub®will search for the Spektra Globe®. Depending

on the environment it could take a few minutes before

your device is discoverable. Once you see your Spektra

Globe® in the list, tap on it to add it.

4. You will be required to scan or type in the QR code to

confirm that the device can be joined to your network.

IV. How to pair with the Touch Lamina®:

1. Open you Silux Control®app and navigate to “Edit

devices” menu.

2. Select the Spektra Globe®you wish to pair and tap the

“Pair” botton. The Spektra Globe®will now be in teach mode.

3. Ensure the Touch Lamina®has power. Press the Teach

button on the Touch Lamina®. The green light on the Touch

Lamina®will start flashing.

4. Tap the button on the Touch Lamina®corresponding to the

Spektra Globe®you wish to pair with this device. The green

light will switch off after successfully paired.

If the green light stays on, the pairing was unsuccessful and

you should wait for 30 seconds for the green light to

go off before trying again.

Please refer to the Touch Lamina®and Seeker®manuals

regarding controlling your Spektra Globe®from network

paired devices.

IV. Hubcentric topology.

Your Silux Control®automation system uses a technology

known as Hubcentric topology. This means that all your

devices communicate with each other. In larger areas, it is

possible that a device might be too far from the

IntellihHub®to communicate reliably. Your IntelliHub®will

then use other devices which are more in range to create

a more reliable connection to the out of range device. The

distance at which your IntelliHub®can communicate with

your Silux Control®devices varies according to the

environment. The IntelliHub®has been developed to

achieve a distance of 20m, however, thick walls, large

electrical appliances and long distances are 3 factors that

can limit communication with Silux Control®devices. Use

the “diagnostics” section of your Silux Control®app to

diagnose any issues you might be experiencing with

communication on your Silux Control®Network.

V. Factory Reset:

This function will remove all paired devices and restore

the settings to the original state. Open you Silux Control®

app and navigate to “Edit devices” menu. Select the

Spektra Globe®you wish to reset and tap the “Reset”

botton. The Spektra Globe®will now be reset back to

factory mode.

Water Heater

IntelliHub

Tier 1 Tier 2 Tier 3

6. Safety precautions

• Always make sure the power source is off before

installing or repairing electrical products. Switch the main

power off at the circuit breaker if uncertain.

• Treat this device as if it’s live or energized even if there

is no power or indication lights on.

• Avoid cold rooms or other areas with a high humidity.

• If water or any chemical is spilt on this device, please

shut the main switch or circuit breaker off.

• Never handle this product when hands, feet or body are

wet or when standing on a wet floor.

• When electrocuted, consult a doctor.

• Keep highly flammable liquids away from this device.

• Do research about wire insulating colour codes for your

country.

• Please consult a qualified electrician.

Warning: Please follow all safety precautions when

installing this product. It is always recommended to

use a qualified electrician. Silux Control®and its

distributors and resellers cannot be held responsible

for any injury or death.

7. Versions, changes and updates:

Currently, there is only one variant of this product. In the

future, this might change or new types of Spektra Globe®’s

may join the family.

At Silux Control® , we implemented an over-the-air

firmware update for the Spektra Globe® to ensure that the

Spektra Globe®is always compatible with the latest Silux

Control®devices.

The Spektra Globe®Model no: SC-SPG01

User Manual Revision No: SPG01.1

6. Safety precautions

• Always make sure the power source is off before

installing or repairing electrical products. Switch the main

power off at the circuit breaker if uncertain.

• Treat this device as if it’s live or energized even if there

is no power or indication lights on.

• Avoid cold rooms or other areas with a high humidity.

• If water or any chemical is spilt on this device, please

shut the main switch or circuit breaker off.

• Never handle this product when hands, feet or body are

wet or when standing on a wet floor.

• When electrocuted, consult a doctor.

• Keep highly flammable liquids away from this device.

• Do research about wire insulating colour codes for your

country.

• Please consult a qualified electrician.

Warning: Please follow all safety precautions when

installing this product. It is always recommended to

use a qualified electrician. Silux Control®and its

distributors and resellers cannot be held responsible

for any injury or death.

7. Versions, changes and updates:

Currently, there is only one variant of this product. In the

future, this might change or new types of Spektra Globe®’s

may join the family.

At Silux Control® , we implemented an over-the-air

firmware update for the Spektra Globe® to ensure that the

Spektra Globe®is always compatible with the latest Silux

Control®devices.

The Spektra Globe®Model no: SC-SPG01

User Manual Revision No: SPG01.1

This user manual may be outdated. Please visit our

website at www.siluxcontrol.com for updated models &

versions, updated user manuals, future products and to

see the rest of the wonderful products Silux Control®has

to offer.

8. More Silux Control®automation products

Product Silux Control®Name

Hub IntelliHub®

Relay Module Dry contact Collector®

Relay Module Collector Relay®

Relay Module Dimmable Collector Dimmable®

Repeater/Range Extender Silux RPT®

PIR Sensor Seeker®

Touch Plate EU/SA Touch Lamina Altus®

Touch Plate USA Touch Lamina Artatus®

Plug Electrifier®

Smoke/Gas Detector Halitus®

Water Heater / Geyser Thermo Stabilizer®

High Power Appliances Tolleno®

Irrigation Saturizer®

Garage Tilt Tylten Pro®

Smart Switch Smart Module®

RGB Globe Spektra Globe®

RGB Downlight Spektra Downlight®

*Please note: Not all the products on this list are

available yet, but will become available in the near

future. This list can change at any time. Please refer to

www.siluxcontrol.com for new and discontinued

products. New products will be added in time to come

as well.

Appendix II

1. Troubleshooting

Please visit our website at www.siluxcontrol.com/FAQ for detailed

list of all the Frequently Asked Questions.

• Ensure that the power going to the device is on.

• Verify you have the latest app installed on your device

and that you’re connected to your local network.

• Verify that your IntelliHub®is on and connected to your

local network.

• Verify that this device is added to your device list when

using the app.

• Verify that you have the correct device selected when

using the app.

• Ensure that the Touch Lamina®is correctly paired when

using it.

2. Warranty

I. What this warranty covers:

Silux Control®warrants to the original purchaser of this Silux

Control®product that the product shall be free from defects in

design, assembly, material, or workmanship under normal use and

operation.

Silux Control®‘s sole and exclusive obligation under the foregoing

warranty shall be to repair or replace, at its option, any defective

product that fails during the warranty period.

The expense of removal and reinstallation of any item is not

included in this warranty.

WARNING: Silux Control® and its distributors and resellers

cannot be held responsible for any damages this product might

have caused including 3rd party damages.

II. What period does this warranty cover: Silux Control®warrants

this product for 12 months.