Sim-Lab GT1-PRO User manual

GT1-PRO INTEGRATED SINGLE MONITOR MOUNT
VERSION 1.0
Last updated: 12-07-2023
INSTRUCTION MANUAL

2|2 11
BEFORE YOU START:
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (page 10) and make sure all the parts are delivered.
We encourage you to read the product manuals for included products if this one doesn’t answer all of
your questions. Please refer to the following if needed:
www.sim-lab.eu/vario-vesa-manual
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.
6MM
Tools needed:

3|3 11
BUILD 2X
Slot-Nut M8
1X
500MM
1X
Profile 40X40
End-Cap
2X
A2
A6
A11

4|4 11
Corner
Bracket
2X
M8 X 16
2X
Slot-Nut M8
2X
600MM
1X
Washer M8
2X
A1
A4
A11
A10
A8

5|5 11
M8 X 16
2X
Washer M8
2X
A10
A8

6|6 11
Cap-Washer
M8
Slot-Nut M8
4X
Integrated Bracket
2X
M8 X 25
4X 4X
A3
A9 A7
A11

7|7 11
Cap-Washer
M8
Slot-Nut M8
4X
M8 X 25
4X 4X
A7 A9 A11

8|8 11
M8 X 16
2X
Vario VESA
Holder
1X
Corner Bracket
Cap
2X
Washer M8
2X
Slot-Nut M8
4X
A5
B15
B14
B9
B1

9|9 11
Vario VESA
Plate
1X
Vario VESA
Pin Holder
2X
M8 X 40
(Set Screw)
2X
M5 X 20
(Set Screw)
2X
M5 X 20
4X
Vario VESA
Pin
1X
B3
B2
B12
B6
B13
B13
B12
B4
When parts B12 and B13 are installed like above,
monitors are easy to install in a neutral
position. Parts B12 can be adjusted to change
the tilt and/or height.
Parts B13 can be adjusted to adjust the monitor
sideways if needed, and fix it in place.

10 |10 11
BOX A - GT1-Pro Integrated Monitor Mount
PROFILE KIT
#Part QTY Note
A1 40X40 Length=600mm 1
A2 40X40 Length=500mm 2
HARDWARE KIT
A3 Integrated bracket 2
A4 Corner bracket 40x40 2
A5 Corner bracket 40x40 cap 2
A6 Profile 40x40 end-cap 4
A7 Bolt M8 X 25 DIN 912 8
A8 Bolt M8 X 16 DIN 912 4
A9 Cap-Washer M8 8
A10 Washer M8 DIN 125-A 4
A11 Slot-Nut M8 12
BOX B - Vario VESA single adapter set
HARDWARE KIT
#Part QTY Note
B1 Vario VESA holder 1
B2 Vario VESA plate 1
B3 Vario VESA pin holder 2
B4 Vario VESA pin 1
B5 Bolt M6 X 12 DIN 7991 4 Used with VESA 100/200 adapter.
B6 Bolt M5 X 20 DIN 7991 4
B7 Bolt M4 X 16 DIN 7985 4 Philips head.
B8 Bolt M4 X 10 DIN 7985 4 Philips head.
B9 Bolt M8 X 16 DIN 912 2
B10 Bolt M6 X 16 DIN 912 4
B11 Bolt M5 X 16 DIN 912 4
B12 Set screw M8 X 40 DIN 916 3
B13 Set screw M5 X 20 DIN 916 2
B14 Washer M8 DIN 125-A 2
B15 Slot-Nut M8 2

11 |11 11
If you still have some questions regarding assembly of this product or about the manual itself,
please refer to our support department. They can be reached at
suppor[email protected]
Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab
customers hanging out. They might just help you along if you ask them nicely ;)
www.sim-lab.eu/discord
If you feel like printing this manual, please consider the environment before doing so. For the best
results, make sure you print at 100% scale without borders.
Product page on the Sim-Lab website: