SimpleTech Pro Drive FP-UFE/1TB User manual

ProDriveUser
Guide
document version 1.0 (071011)

Copyright © 2007 Fabrik,Inc. All rights reserved.This publication is protected by copyrightand international
treaty. No part of this publication may be reproduced in any form by any means, or provided to any third
party, without prior written authorization from Fabrik, Inc.
Trademarks: Apple, Mac and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft,
Windows 2000, Windows Vista and Windows XP are registered trademarksof Microsoft Corporation. Other
trademarks mentioned in the document are registered trademarks of theirrespective companies
Change notice: The content of this document is for informationonly and is subjectto change without notice.
While reasonable efforts have been made to ensure the accuracy of this document Fabrik assumes no liability
resultingfrom errors or omissions from this document or from the use of the information contained herein.
Fabrik reserves the right to make changes in the product design or the product documentation without
obligation to notify any person of such changes or revisions.
Compliance statements:
Canada: This class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations
USA: (FCC statement) This device complies with part 15 of the FCC Rules. Operation is subject tothe
following conditions:
1. The devices may not cause harmful interference.
2. The devices must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has beentestedand has been found to comply with the limits for a ClassB digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions may cause harmful
interference to radio communications. However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interferenceto radio and televisionreception,
which can be determined by turning the equipment off andon, the user is encouraged totry and correctthe
interference byone or more ofthe following measures.
–Reorient or relocate the receiving antenna
–Increase the separation between the equipment and receiver
–Connect the equipment to an outlet different from that to which the receiver is connected
–Consultthe dealer or an experienced radio/TV technician for help
Modifications to thisproduct not authorized by Fabrik could void theFCC and IndustryCanada regulations
and negate your authority to operate the product.
Japan: This is a class B product based on the standard of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic
environment, it may cause interference. Install and use equipment according to the installation manual.
Manufacturer’s Declarationfor CE conformity: Fabrik declaresthatthis product conforms to following
Europeanstandards: Class B EN60950, EN55022, EN55024, EN6100-3-2:2000, EN61000-3-3: 2001. With
reference to the followingconditions:72/23/EEC Low Voltage Directive,89/336/EEC EMC Directive. The
WEEE symbol (FPO) on the product packaging indicated that this product must not be disposed of with your
other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over
to a designated collection pointfor the recycling electrical and electronic equipment. The separate collecting
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and
ensure that it isrecycled in a manner that protects human health and the environment. For more information
about where you can drop off your wasteequipment for recycling, please contact your local cityoffice,your
household waste disposal service, or the shop where you bought the product.

Pro Drive User Guide iii
Contents
Introduction
Health and Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
General Use Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Understanding Rated Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Liability Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Pro Drive Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the Pro Drive
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Views of the Pro Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
LED Behavior (Front Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
eSATA Cables and Interface Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting and Starting Your Pro Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Backup Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Using the Kensington Lock Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Reformatting for Write-Access on the Mac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Troubleshooting and Support
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Contacting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Index

iv Pro Drive User Guide

Introduction 5
Introduction
Congratulations on your purchase of your new Pro Drive with eSATA and
USB. This high-performance, high capacity hard drive is ideal for your high
performance storage needs whether you are a creative professional or just
trying to protect your digital content.
Health and Safety Precautions
•Do not attempt to modify or disassemble Pro Drive in any way. Doing so
will void the manufacturer warranty
•Never insert any metallic object into the drive. Electrical shock, fire or
short circuiting may result.
•If the Pro Drive appears to be defective or malfunctioning, consult a
qualified SimpleTech Technical Support representative before attempting
to physically repair the drive.
•Never expose Pro Drive to rain or use it near water or in a damp
environment. Doing so may result in risk of electrical shock, fire or short
circuit.
•Make sure that your computer and Pro Drive are electrically grounded to
avoid increased risk of electrical shock.

6Pro Drive User Guide
GeneralUse Precautions
General Use Precautions
•Do not expose the Pro Drive to temperatures outside the range of 5c to 35c
(41f to 95f); or to operational humidity beyond 5-80%, non-condensing, or
non-operating humidity beyond 10-90%, non-condensing. Doing so may
damage the Pro Drive or damage its casing. Avoid placing the drive near
a source of heat or exposing it to direct sunlight.
•Rated cooling designed for altitudes up to 2000 meters.
•Use only with the power adapter supplied with the drive.
•Do not use the Pro Drive near other electrical appliances such as
televisions, radios or speakers. Doing so may cause interference which
will adversely affect the operation of those devices.
•Do not place the Pro Drive near sources of magnetic interference such as
computer displays, televisions or speakers as it can affect the operation of
your Pro Drive.
•Do not place heavy objects on top of the Pro Drive.
•Do not expose your Pro Drive to excessive dust.
•Please replace defective materials directly through Fabrik/SimpleTech.
Any unauthorized opening or modifications to the case will void the
manufacturer’s warranty.
Understanding Rated Capacity
A disk drive requires a little space for internal housekeeping so the usable
capacity for your data is slightly less than what is advertised on the box. The
difference is very small but this explains why your computer may report that
your drive has slightly less capacity than you expected.
Liability Disclaimer
Any loss, corruption or destruction of data while using any
Fabrik/SimpleTech hard drive is the sole responsibility of the user and
under no circumstances will Fabrik Inc. be held liable for the recovery
or restoration of data stored on a Fabrik drive.

Introduction 7
ProDriveFeaturesandBenefits
Pro Drive Features and Benefits
SimpleTech’s USB and eSATA II Pro Drive is a great place to store and protect
your massive digital photo, video and HD movie libraries. SimpleTech
designed this monster to set up in a flash, and with eSATA II you’ll get data
transfer rates up to 3Gbits/sec.
With local backup and Fabrik Ultimate Backup, you get the same two-level
protection the pros use. So, no matter what happens to your drive–a spilled
drink, a curious toddler, a theft or a natural disaster–you know your files are
still safe and secure online and off-site. Fabrik Ultimate Backup keeps
encrypted copies of your files on our dedicated off-site servers. And it’s always
working even when you’re not, so you get constant, near real time backup that
won’t slow down your system.
And, Pro Drive ’s secure stackable design ensures a snug fit with Fabrik’s
SimpleDrive and Duo Pro drive so you can always add more storage without
taking up more desk space.
Features:
•High Performance Storage and Backup
•High Speed USB 2.0 and 3Gb/sec eSATA
•Smart fan for quiet reliability
•Fabrik Local Backup - easy backup to Pro Drive
•Fabrik Ultimate Backup service protects data online
•Security lock slot
•Stackable design also stands vertically

8Pro Drive User Guide
Pro Drive Features and Benefits

Using the Pro Drive 9
UsingtheProDrive
System Requirements
Windows:
•Windows 2000/XP/Vista
•USB 1.1 or 2.0 port
•eSATA II port (may require optional eSATA card upgrade)
Mac:
•OS 10.3 or higher
•USB 1.1 or 2.0 port
•eSATA II port (may require optional eSATA card upgrade)
Power requirements:
•100-240 V – 1.5A, 50-60 HZ power
•Supply voltage fluctuations should not exceed +- 10% of the nominal and
transient over-voltages according to over-voltage category II
Package Contents
•7200RPM external hard drive
•USB 2.0 Cable

10 Pro Drive User Guide
Views of the Pro Drive
•Fabrik Ultimate Backup (downloader)
•Fabrik Local Backup (preloaded)
•Warranty Card
•AC Adapter
•Quick Installation Guide
•Mac Formatting Notes
Views of the Pro Drive
All of the connectors, switches, and security lock are located on the rear panel
of the Pro Drive and are described in the following illustration.
Model No.: xxxx-xxxxx-xxx
DC input
socket for
AC adapter
Security
lock slot
(optional)
Power
ON/OFF
Connect
USB OR
eSata cable
between
drive and
computer
Rear Panel View

Using the Pro Drive 11
LEDBehavior(FrontPanel)
The front panel contains the LED status indicator.
LED Behavior (Front Panel)
The LED on the front panel of the drive has two states:
•Steady glow: The drive is on and ready for use
•Blinking: The drive is active (read, write, rebuild)
eSATA Cables and Interface Cards
In order to use your Pro Drive with eSATA it may be necessary to install a
SATA II PCI, PCI X or PCI Express card. Most computers do not ship with
external SATA ports so a PCI card must be installed to use this feature. For
more info on expansion cards, visit www.simpletech.com/support.
LED Status
Steady Glow: Ready
Blinking: Drive active (read/write)
Front Panel View

12 Pro Drive User Guide
Connecting and Starting Your Pro Drive
Connecting and Starting Your Pro Drive
Setting up your Pro Drive is quick and easy.
◗To set up your drive:
1Plug the AC power into the appropriate AC outlet, connect the power
cable to the power port on the back of the drive (see illustration) and turn
on the Pro Drive using the power button (see illustration)
2Connect a data cable (only one) between the drive and your computer.
a. eSATA connections: Make sure you have an available eSATA port on
your PC and connect an eSATA cable (not provided) between your
drive and the computer. For more information about eSATA, refer to
eSATA Cables and Interface Cards on page 11.
a. USB connections: Connect the USB cable (provided) between your
drive and a USB port on your computer.
Your Pro Drive should be ready to access in My Computer (Windows) or on
your Mac desktop as a new disk drive volume.
Backup Solutions
Your Pro Drive comes with unbeatable online and local backup software.
•Fabrik Local Backup (FLB)
FLB is an easy to use local backup program for backing up and restoring
files from an external hard drive. Information on how to use FLB is
available in the online help which can be accessed from any screen within
the software. Once you have set up your initial backup, you can schedule
regular backups to occur at the time of your choice.
•Fabrik Ultimate Backup (FUB)
FUB is a powerful offsite backup service that enables you to backup your
files to an offsite server securely. You are entitled to a free limited storage
account with an option to upgrade to an unlimited storage plan for a low
monthly fee. For more information on Fabrik Ultimate Backup, visit
backup.fabrik.com.
To begin the installation, double-click the launcher located in the Fabrik
Backup Solutions folder of the Pro Drive. For additional information visit
www.simpletech.com/support

Using the Pro Drive 13
UsingtheKensingtonLockSlot
Using the Kensington Lock Slot
Included on the Pro Drive is a Kensington security lock slot. This slot is
compatible with Kensington locking devices (sold separately). For more
information on the Kensington Security Slot and available products visit
www.kensington.com.
Reformatting for Write-Access on the Mac
Pro Drives come pre-formatted with NTFS. For full read/write access to Pro
Drive on a Mac computer you must reformat your Pro Drive.
◗To format your Pro Drive for a Mac:
1If your Pro Drive is not turned on and connected to your Mac (remember:
Mac OS 10.3 and later are required), do that now.
2Double-click the Pro Drive icon on your desktop.
3Drag the Backup Solutions folder to your desktop.
4Double-click the MacHD on your desktop.
5Double-click Applications.
6Double-click Utilities.
7Double-click Disk Utility.
8Find your Pro Drive on the list of hard drives on the left and select the line
that shows disk capacity (in GB).
9Click Erase.
10 Select the desired format – MacOS Extended for Mac use only; MS-DOS
for use on both Mac and Windows computers. Note: choosing MS-DOS
format assures maximum platform compatibility, but performance is
reduced so it should only be selected if you really need read-write
compatibility on both platforms.
11 If desired, you can change the drive label too.
12 Click Erase and click Erase again in the second window that appears.
Reformatting begins and typically lasts 2-4 minutes.
13 When formatting is complete, drag the Backup Solutions folder from the
desktop (from Step 3 ) back to your Pro Drive.

14 Pro Drive User Guide
Reformatting for Write-Access on the Mac

Troubleshooting and Support 15
Troubleshooting
andSupport
Troubleshooting
Troubleshooting information is based on real customer experience and is being
gathered now by our Support organization. This document will be updated
online soon with the new information.
Contacting Technical Support
Technical Support is available Monday through Friday from 6:30 AM to 5:30
PM (PST).
Phone: [phone] or 877-486-1555
E-mail: Go to www.simpletech.com/support and click the Technical
Support/RMA request and choose Need Technical Support.

16 Pro Drive User Guide
Contacting Technical Support

Pro Drive User Guide 17
Index