Simpli Home LOWRY User manual

LOWRY / MITCHELL / FULTON
TV MEDIA STAND
MODEL # AXCLRY-08RNAB
/211
TM
TM
SI
M P HOME®
LIFE BY DESIG N

/212
TM
TM
SI
M P HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

/213
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

/214
Wood Furniture Care
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the
components of wooden objects are continually pushing and pulling against each other. This
pressure often results in parts of furniture no longer fitting together closely or becoming
distorted or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense
the humidity level and adjust itself accordingly. Don't over-humidify; that can
damage wood by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece
3 to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber ON SURFACE (FOOT PADS, ETC)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaner.
IMPORTANT : Keep this manual for future reference.
CARE and MAINTENANCE

/215
PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCLRY-08RNAB
.A.B
.E
TOP
QTY 1 BOTTOM SHELF
QTY 1 LEFT SIDE
QTY 1
.
L
C
RIGHT SIDE
QTY 1
.
RC. LD. RD
LEFT DIVIDER
QTY 1 RIGHT DIVIDER QTY 1
.F.G
DOOR (L&R Same)
QTY 2 SIDE SHELF
QTY 2
BACK PANEL
QTY 1
.I .H
MIDDLE SHELF
QTY 1
LEG
QTY 2
Warning Label
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

/216
PRE-ASSEMBLY INFORMATION MODEL # AXCLRY-08RNAB
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
ALLEN KEY BOLT
M8 x 20 mm
QTY 12
.1.2.3.4
.5.6.7.8
.9.10 .11
ALLEN KEY SCREW
M6 X 30mm
QTY 24
ALLEN KEY
QTY 1
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 20
MAGNET AND PLATE
QTY 2 SETS SHELF SUPPORT
QTY 18
PHILLIPS SCREW
M3 X 15mm
QTY 8
PHILLIPS SCREW
M4 X 15mm
QTY 24
WOOD DOWEL
Ø8 X 30mm
QTY 12
ADJUSTABLE HINGE
QTY 4 SETS
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
.12
.13
LOCK WASHER
Ø12 / Ø8 x 1.5 mm
QTY 12
WASHER
Ø19 / Ø8 x 1 mm
QTY 12

COMPONENTS-KEY DIAGRAM MODEL # AXCLRY-08RNAB
/217
A
C L
C R
D L
D R
B
E
E
FGF
I
I
H
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/218
STEP-1 11
11
D L D R
&
D L
D R
1. Insert two Dowels 11 into drilled holes on each Left Divider DL and Right Divider DR .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
1. Insert four Dowels 11 into drilled holes on Bottom Shelf B .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
11
11
11
B
B
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/219
STEP-2
4
5
D
L
B
B
D
R
D L
D R
B
1. Attach Right Divider DR and Left Divider DL to Bottom Shelf B using six Allen
Key Screws 4 .
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/2110
STEP-3
C L C R
&
11
C
L
C R
1. Insert two Dowels 11 into drilled holes on each Left Side CL and Right Side CR .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
11
STEP-4
1. Attach Bottom Shelf B to Left Side CL using three Allen Key Screws 4 .
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
B
C L
4
5
4
Front /
Avant
Front /
Avant
Front /
Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/2111
STEP-5
B
C
R
4
5
C R
B
1. Repeat Step-4 for Right Side CR .
Front / Avant
Front / Avant
Front / Avant
Front / Avant Front / Avant
Front / Avant
Front / Avant
Front / Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/2112
STEP-6
A
D R
D L
C L
C R
4
5
4
5
1. Attach Top A to Sides CL , CR using six Allen Key Screws 4
( three Screws / each Side ).
2. Attach Top A to Dividers DL , DR using six Allen Key Screws 4
( three Screws / each Side ).
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
Front / Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/2113
STEP-7
1
5
I
I
B
B
I
I
1. Attach Legs I to Bottom Shelf B .
2. Use twelve Allen Key Bolts 1 , twelve Lock Washers 2 and twelve Washers 3 to
secure part I and B (six Bolts, six Lock Washers and six Washers on each Leg).
3. Use Allen Key 5 to tighten Bolts. Do not over-tighten.
2
3
P
X

ASSEMBLY MODEL # AXCLRY-08RNAB
/2114
STEP-8
NOTE: The screwdriver is not
included in the hardware pack.
H
H
6
1. Attach the Top Back Panel H to back frame by using Phillips Screws 6 .
Warning Label
Front /
Avant
Front /
Avant

ASSEMBLY MODEL # AXCLRY-08RNAB
/2115
STEP-9
10
12
E
E
1. Attach Adjustable Hinges 12 to Doors E using Phillips Screws 10 into guide
holes on Doors E .

ASSEMBLY MODEL # AXCLRY-08RNAB
/2116
STEP-10
D R
D L
C L
12
10
C R
E
E
EE
C R
C L
D L
D R
1. Attach Adjustable Hinges 12 on Doors E to Sides CL , CR using Phillips
Screws 10 into guide holes on Sides CL , CR .
2. Attach Magnets 7 using Phillips Screws 9 into guide holes on Left Divider DL and
Right Divider DR .
3. Use Phillips screwdriver to snugly tighten screw.
7
9
79

ASSEMBLY MODEL # AXCLRY-08RNAB
/2117
Tighten the Screw marked II to fasten hinge. The door may need to
be adjusted so that all the spaces between the door and the unit sides are equal.
To adjust, follow instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 10 , adjust door to desired position, re-tighten screw .
IMPORTANT NOTE:
II I
10

ASSEMBLY MODEL # AXCLRY-08RNAB
/2118
STEP-11
shelf support
anti - tipping
shelf level 1
shelf level 2
shelf level 3
G
8
8
F
1. Use four Shelf Supports 8 for each Shelf F , G in desired location .
2. Two Shelf Supports 8 may be used on back top of each Shelf F , G as a
tipping restraint.
G
F
F&

/2119
STEP-12
FURNITURE TIP OVER RESTRAINT ASSEMBLY
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
13
13

/2120
FURNITURE TIP OVER RESTRAINT ASSEMBLY
Furniture Tip Over Restraint Instructions:
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
Bring both ends together and slide the smooth side upright
through the square-shaped end and pull through to create the
“locked” position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
·DO NOT put a TV or other heavy objects on top of a chest of
drawers or any other furniture not intended for use with a TV
·DO NOT place heavy objects in top drawers
·DO NOT let children climb or hang on drawers, doors or shelves
Px
P
P
x
x