Simplicity 1733092 User manual

Parts Manual
Rev. 8/2008
Citation
Series Zero-Turn Riders & Mower Decks
TP 400-7287-S-CI-S
Mf
g
. No. Descri
p
tion
21HP Product
2690444 Citation, 21HP Briggs & Stratton Zero Turn Rider w/48"
Mower
Mf
g
. No. Descri
p
tion
23HP Product
2690445 Citation, 23HP Briggs & Stratton Zero Turn Rider w/52"
Mower
1733092
Part No.:

Table Of Content
s
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGES
Main Frame & Front Suspension Group .............................................................................................................. 4
Rear Bumper Group ............................................................................................................................................. 6
Engine & PTO Group ........................................................................................................................................... 8
Instrument Control Panel Group .......................................................................................................................... 10
Pump Drive Group ............................................................................................................................................... 12
Motion Control Group - S/N: 201317250 & Below ............................................................................................... 14
Motion Control Group - S/N: 201317251 & Above .............................................................................................. 18
Hydraulic Group ................................................................................................................................................... 22
Hydraulic Mount Group ........................................................................................................................................ 26
Electrical Group .................................................................................................................................................... 28
Seat, Mount & Floor Group .................................................................................................................................. 30
Fuel Supply Hose Group & Tank Replacement Parts Group .............................................................................. 32
Fuel Tank & Mount Group .................................................................................................................................... 34
Parking Brake Group ............................................................................................................................................ 36
Rear Suspension Group ...................................................................................................................................... 38
Deck Lift Group - S/N: 2013202961 & Below ...................................................................................................... 40
Deck Lift Group - S/N: 2013202962 & Above ...................................................................................................... 44
Wheel & Tire Group ............................................................................................................................................. 48
Decals - Brand & Model ....................................................................................................................................... 50
Decals - Safety & Operation ................................................................................................................................ 52
48" & 52" Mower Deck - Hanger Chains .............................................................................................................. 54
48" & 52" Mower Deck - Housing, Cover, Spindle & Blade ................................................................................. 56
48" & 52" Mower Deck - Pulleys, Belts & Idler Arm ............................................................................................. 58
48" & 52" Mower Deck - Rollers ........................................................................................................................... 60
48" & 52" Mower Deck - Spindle Service Parts Group ........................................................................................ 62

Main Frame & Front Suspension Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287frm0
The above parts group applies to the following Mfg. Nos.:
4
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Main Frame & Front Suspension Group
Footnotes
MAIN FRAME ASSEMBLY (Serial No.: 2013170250 & Below)1 5400257CSM 1
GREASE SEAL2 5021072SM 2
COTTER PIN, 1/8" X 1-1/4"3 5025203X10SM 2
SCREW, 5/16-18 X 1 FLAT HD SC4 5025303SM 8
NUT, 5/16-18 Hex Nylon Lock5 5025057SM 8
BOLT, 3/8-16 X 1-3/4"6 5025013X14SM 2
NUT, 3/8-16 Hex Nylock Flange7 5025394SM 4
BOLT, 3/8-16 X 4"8 5025013X32SM 2
FRICTION PLATE9 5045990SM 2
SHOCK & SPRING ASSEMBLY10 5023483SM 2
BEARING, Tapered Roller11 5020884SM 4
CAP12 5021073SM 2
CASTER YOKE13 5047049CSM 2
NUT, 3/4-16 Hex Slotted14 5025104SM 2
WASHER, 3/4" SAE15 5025160SM 6
NUT, 3/4-16 Hex Nylon Lock16 5025284SM 1
SPACER, .75 X 1.00 X 2.3817 5047489SM 1
BOLT, 3/4-16 X 6-1/2"18 5025265X52SM 1
ASSM, PIVOTING FRONT END (Includes Ref. #'s 20 and 21)19 5401410SM 1
PIVOT BEARING20 5022852SM 1
PIVOT BEARING21 5100358SM 1
WASHER, 3/8" SAE22 5025156SM 4
WASHER, 3/8" FENDER23 5025165SM 6
WELD, PIVOTING FRONT END - ORG (Serial No.: 2000676809 & Above)24 5402536CSM 1
CAP, CASTER SPINDLE LOW PROFILE (Serial No.: 2000676809 & Above)25 5100882SM 2
NUT, 3/4-16 HEX JAM NYLON LOCK (Serial No.: 2000676809 & Above)26 5025448SM 2
BELLEVILLE WASHER, 1.500 X .755 (Serial No.: 2000676809 & Above)27 5025449SM 4
BEARING CUP (Serial No.: 2000676809 & Above)28 5020883SM 4
WELD, CASTER YOKE - ORG. (Serial No.: 2000676809 & Above)29 5402208CSM 2
BOLT, 1/4-28 X 1/2, GD5 YZ (Serial No.: 2000676809 & Above)30 5025457SM 2
WELD, Main Frame Assembly (Serial No.: 2013170251 & Above)31 5404316CSM 1
The above parts group applies to the following Mfg. Nos.:
5
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Rear Bumper Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287bmp1
The above parts group applies to the following Mfg. Nos.:
6
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Rear Bumper Group
Footnotes
MAIN FRAME1- -
HEAT SHIELD2 5401174CSM 1
BUMPER3 5403268CSM 1
PLATE, SEAT BELT ANCHOR - LH4 5400844CSM 1
PLATE, SEAT BELT ANCHOR - RH5 5400847CSM 1
WASHER, 1/2" SAE6 5025158SM 4
NUT, 1/2-13 HEX NYLOCK FLANGE7 5025396SM 6
BOLT, 1/2-13 X 3-1/4" GD58 5025017X26SM 4
CARB PROTECTOR PLATE9 5061725CSM 1
PLUG, PANEL, 1.25 BLACK10 5023484SM 6
ROLL BAR TOP LOOP11 - 1
ROLL BAR POST, RH12 - 1
ROLL BAR POST, LH13 - 1
WASHER 3/8" SAE14 5025156SM 2
BOLT, 3/8-16 X 1" GD515 5025013X8SM 2
NUT, 3/8-16 X 1" GD516 5025394SM 2
BOLT, 5/16-18 X 3/4" GD517 5025011X6SM 4
NUT, 5/16-18 HEX NYLOCK FLANGE18 5025392SM 4
BOLT, 1/2-13 X 1-3/4 GD5 YZ19 5025017X14SM 2
NUT, 1/2 X 13 HEX NYLOCK FLANGE20 5025396SM 2
SEAT BELT ASSEMBLY, STANDARD21 5100139SM 1
SEAT BELT ASSEMBLY, EXTRA LONG21 5100397SM 1
ROLL BAR HARDWARE BAG22 5100377SM 1
PIN, HITCH, BLACK W/ PLASTIC LANYARD23 5100079SM 2
RUBBER BUMPER24 5100383SM 2
SCREW, 1/2-13 X 1.00, SHCS25 5100267SM 2
*BOLT26 - 2
*NUT27 - 2
ROPS COMPLETE IN BOX, IS150028 5100186SM 1
WASHER, 5/16"SAE29 5025155SM 4
SPACER, .52 X 1.00 X .7530 5045178SM 1
SPACER, .515 X 1.00 X .21831 5100520SM 1
CAP, VINYL32 5101049SM 1
RUBBER WASHER (Not shown)33 5100545SM 2
The above parts group applies to the following Mfg. Nos.:
7
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Engine & PTO Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287engb0
The above parts group applies to the following Mfg. Nos.:
8
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Engine & PTO Group
Footnotes
MAIN FRAME1- -
ENGINE, 21HP Briggs & Stratton (Model 385777)2- 1
ENGINE, 23HP Briggs & Stratton (Model 386777)2- 1
CRANKSHAFT PULLEY3- 1
SPACER, 1.13 X 1.75 X .974 5046845SM 1
CLUTCH5 5023432SM 1
SPACER, .45 X 1.88 X .386 5045475SM 1
BOLT, CRANKSHAFT, 7/16" X 2"7 5044853SM 1
KEY, 1/4" SQ. X 3-1/2"8 5050407X28SM 1
MUFFLER9 5100361SM 1
CLUTCH ANCHOR PLATE10 5061857CSM 1
SPACER, .51 X .75 X .5611 5047027SM 2
CLUTCH ANCHOR PAD12 5043636SM 1
WASHER, 5/16" SAE13 5025155SM 11
BOLT, 5/16-18 X 1"14 1921333SM 5
WASHER, Clutch Anchor15 5044617SM 3
NUT 5/16-18 Hex Nylon Lock16 5025057SM 3
NUT, 5/16-18 Hex Nylock Flange17 5025392SM 8
OIL DRAIN HOSE18 5048681SM 1
CLAMP, Vinyl Insulated19 5021500SM 1
BOLT, 1/4-20 X 3/4"20 1923341SM 1
NUT, 1/4-20 Hex Serrated Flange21 5025126SM 1
BOLT, 5/16-18 X 1-3/4"22 1922127SM 4
BOLT, 5/16-18 X 1-1/2"23 502501112SM 2
WASHER, 5/16" Internal Tooth Lock24 5025188SM 4
GROMMET, 7/8"25 5021379SM 1
SCREEN, SPARK ARRESTER (NOT SHOWN)26 5101641SM 1
The above parts group applies to the following Mfg. Nos.:
9
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Instrument Control Panel Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287ins0
The above parts group applies to the following Mfg. Nos.:
10
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Instrument Control Panel Group
Footnotes
SWITCH RETAINER RING1 5022222SM 1
NUT, 3/8-24 Hex2 5025039SM 1
SWITCH, LIGHT3 1703799SM 1
SCREW, Allen Head, 1/4-20 x 1/24 5025299X4SM 3
BOLT, 1/4-20 X 5/8" GD5 YZ (S/N: 2012617338 & Below)5 5025010X5SM 2
NUT, 1/4-20 Hex Nylon Lock (S/N: 2012617338 & Below)6 5025095SM 2
SWITCH, Ignition, Complete7 1686734SM 1
CABLE, Choke Control, 47"8 5046501SM 1
SWITCH, PTO9 1722887SM 1
CABLE, Throttle Control, 40" (S/N: 2012617338 & Below)10 5048231SM 1
HOURMETER, Digital11 5100978SM 1
CONTROL PANEL (S/N: 2012617338 & Below)12 5061361ASM 1
O-RING, 7/8" ID X 1/16" W13 5022269SM 1
PLATE, CONTROL PANEL - BLACK (S/N: 2012617339 & Above)14 5403402ASM 1
LEVER, THROTTLE CONTROL (S/N: 2012617339 & Above)15 5101118SM 1
CABLE, THROTTLE, 42" (S/N: 2012617339 & Above)16 5101073SM 1
KNOB, THROTTLE CONTROL (SV) (S/N: 2012617339 & Above)17 5046360X1SM 1
SCREW, #10-24 X 3/4" ROUND PHILLIPS (S/N: 2012617339 & Above)18 5025179X6SM 2
NUT, #10-24 HEX NYLON LOCK (S/N: 2012617339 & Above)19 5025271SM 2
The above parts group applies to the following Mfg. Nos.:
11
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Pump Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287pdr0
The above parts group applies to the following Mfg. Nos.:
12
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Pump Drive Group
Footnotes
MAIN FRAME1- -
KEY, 5MM SQ. x 25MM w/ Round Ends2 5023254SM 2
CRANKSHAFT PULLEY3 5047075SM 1
BELT, PUMP DRIVE, BANDED4 5100555SM 1
NUT, 3/8-16 Hex5 1916950SM 2
EYE BOLT, 3/8-16 X 6"6 5021812SM 1
BOLT, 3/8-16 X 4"7 5025013X32SM 1
BUSHING, Brass8 5022157SM 2
NUT, 3/8-16 Nylock Flange9 5025394SM 3
WASHER, 3/8" GR. 9 FLAT10 5025293SM 1
BOLT, 3/8-16 X 2-1/4"11 5025013X18SM 1
BOLT, 3/8-16 X 1-3/4"12 5025013X14SM 1
SPACER, .45 X 1.88 X.3813 5045475SM 1
NUT, 3/8-16 Hex Side Lock14 5025100SM 1
SPRING, Extension, Swivel End15 5022847SM 1
PULLEY, Idler (Single Flange)16 5022621SM 1
PUMP DRIVE IDLER ARM17 5046430CSM 1
SPACER, .39 X 1.00 X 2.5518 5045135SM 1
WASHER, 3/8 x 1-3/419 5025305SM 1
BOLT, 1/4-20 X 1"20 5025010X8SM 4
PULLEY, Pump Drive21 5022586SM 2
BUSHING, Tapered Hub22 5022587SM 2
The above parts group applies to the following Mfg. Nos.:
13
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Motion Control Group - S/N: 201317250 & Below
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287mcg0
The above parts group applies to the following Mfg. Nos.:
14
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - S/N: 201317250 & Below
Footnotes
MAIN FRAME1- -
BOLT, 5/16-18 X 1"2 5025011X8SM 6
WASHER, 5/16" Lock3 5025170SM 4
WASHER, 5/16" SAE4 5025155SM 8
CLEVIS PIN, 3/8" X 1-1/4"5 5025213X10SM 2
HAIRPIN CLIP6 5025211SM 2
BOLT, 5/16-18 X 1-1/4"7 5025011X10SM 4
BOLT, 5/16-18 X 1-1/8"8 5025011X9SM 4
BOLT, 3/8-16 X 2-1/2"9 5025013X20SM 4
BOLT, 3/8-16 X 3"10 5025013X24SM 2
WASHER, 3/8" SAE11 5025156SM 6
NUT, 3/8-16 Hex Nylock Flange12 5025394SM 10
NUT, 3/8-16 Hex Nylon Lock13 5025096SM 4
BOLT, 1/4-20 X 3/4"14 5025010X6SM 4
WASHER, 1/4" SAE15 5025154SM 4
BOLT, 3/8-16 X 1"16 5025013X8SM 2
BOLT, 3/8-16 X 1-1/4"17 5025013X10SM 2
BOLT, 3/8-16 X 1-3/4"18 5025013X14SM 4
SCREW, #10-24 X 1/2"19 5025179X4SM 4
NUT, #10-24 Hex20 5025029SM 4
MOTION CONTROL GUARD21 5061838CSM 2
BALL JOINT, 5/16-24 Female22 5021146SM 2
HYDRO CONTROL ROD23 5046420SM 2
BUSHING, Flange24 5023260SM 2
NEUTRAL CONTROL ROD25 5049969SM 2
CLEVIS, 3/8-24, Plastic26 5021171SM 2
COLLAR, 3/8" Set27 5010546SM 2
SPRING, Compression28 5022645SM 2
NUT, 3/8-24 Hex29 5025035SM 2
DAMPENER (S/N: 2012619803 & Below)30 5100728SM 2
SPACER, .39 X .63 X 1.5031 5048264SM 6
NEUTRAL LOCK PLATE, RH32 5049872CSM 1
NEUTRAL LOCK PLATE, LH33 5049873CSM 1
SWITCH, Plunger, NO/NC34 5022095SM 2
CONTROL ARM MOUNT35 5047004SM 2
BEARING, Flange36 5021499SM 2
BALL JOINT, 5/16-24 Female LH37 5022628SM 2
NUT, 5/16-24 Hex LH38 5023212SM 2
NUT, 5/16-24 Hex39 5025033SM 6
BODY CLIP, 1/4-2040 5022665SM 4
NUT, 5/16-18 Hex Nylon Lock41 5025057SM 2
BOLT, M8-1.25 x 35MM (S/N: 2012619803 & Below)42 5025335SM 4
NUT, M8-1.25 Hex Nylon Lock (S/N: 2012619803 & Below)43 5025354SM 4
NUT, M8-1.25 Hex Serrated Flange (S/N: 2012619803 & Below)44 5025355SM 4
The above parts group applies to the following Mfg. Nos.:
15
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Motion Control Group - S/N: 201317250 & Below
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287mcg0
The above parts group applies to the following Mfg. Nos.:
16
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - S/N: 201317250 & Below
Footnotes
NUT, 5/16-18 Hex Large Serrated Flange45 5025139SM 4
NUT, 5/16-18 Hex Small Serrated Flange46 1931277SM 8
GRIP, Foam47 5022068SM 2
BEARING, Flange48 5021098SM 2
CONTROL SHAFT, RH (S/N: 2012619803 & Below)49 5049843CSM 1
CONTROL SHAFT, LH (S/N: 2012619803 & Below)50 5049842CSM 1
MOTION CONTROL HANDLE, RH51 5047056CSM 1
MOTION CONTROL HANDLE, LH52 5047055CSM 1
HYDRAULIC PUMP53 - -
NUT, 5/16" -18 NYLOCK FLANGE54 5025392SM 6
DAMPENER, CONTROL, #(P6709/P3610) (S/N: 2012619804 & Above)55 5100940SM 2
BALL STUD, 5/16 X .50, (# PC-477-2) (S/N: 2012619804 & Above)56 5100941SM 4
WELD, CONTROL SHAFT, LH - ORG (S/N: 2012619804 & Above)57 5403640CSM 1
WELD, CONTROL SHAFT, RH - ORG (S/N: 2012619804 & Above)58 5403641CSM 1
The above parts group applies to the following Mfg. Nos.:
17
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301479
The above parts group applies to the following Mfg. Nos.:
18
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - S/N: 201317251 & Above
Footnotes
ROD, NEUTRAL RETURN1 5100947SM 2
SPRING, REVERSE RETURN2 5022645SM 2
BUSHING, NYLON3 5023260SM 2
BUSHING, FLANGED .375 X .630 X 2.004 5100942SM 2
COLLAR, 3/8" SET5 5010546SM 4
WASHER, 3/8 SAE6 5025156SM 2
PIN, HAIR, .0915 X 1-7/87 5025210SM 2
BALL STUD, 5/16 X .50,# PC-477-2)8 5100941SM 4
DAMPENER, CONTROL,#(P6709/P3610)9 5100940SM 2
NUT, 5/16-18 HEX NYLOCK FLANGE10 5025392SM 2
ROD, HYDRO LINKAGE11 5100946SM 2
NUT, 5/16-24 HEX, LH12 5023212SM 2
BALL JOINT, 5/16-24, LH FEMALE13 5022628SM 2
WELD, SHAFT MOTION CONTROL-RH-IS500-ORG14 5402589CSM 1
BOLT, 5/16-18 X 1 GD5 YZ15 5025011X8SM 6
WASHER, 5/16" SAE16 5025155SM 8
BOLT, 5/16-18 X 1-1/4" GD5 YZ17 5025011X10SM 2
BALL JOINT, 5/16-24, FEMALE18 5021146SM 2
NUT, 5/16-24 HEX19 5025033SM 6
BEARING, BRONZE FLANGE, 3/420 5021098SM 2
BOLT, 3/8-16 X 1" GD5 YZ21 5025013X8SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE22 5025394SM 14
BEARING, FLANGE23 5021499SM 2
BOLT, 3/8-16 X 1-1/4" GD524 5025013X10SM 2
NUT, 3/8-16 HEX NYLON LOCK25 5025096SM 4
BOLT, 3/8-16 X 1-3/4" GD526 5025013X14SM 8
MOUNT, CONTROL ARM27 5047004SM 2
WELD, NEUTRAL LOCK - RH - IS500-ORG28 5402595CSM 1
WELD, NEUTRAL LOCK - LH - IS500-ORG29 5402594CSM 1
SWITCH, PLUNGER, N.O./N.C.30 5022095SM 2
SCREW, #10-24 X 1/2 ROUND PHILLIPS31 5025179X4SM 4
NUT, #10-24 HEX32 5025029SM 4
BOLT, 5/16-18 X 1-1/8" GD533 5025011X9SM 2
NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)34 5025127SM 8
BOLT, 3/8-16 X 2-1/2" GD5 YZ35 5025013X20SM 4
SPACER, .39 X .63 X 1.5036 5048264SM 6
BOLT, 3/8-16 X 3" GD5 YZ37 5025013X24SM 2
WELD, HANDLE MOTION CONTROL-LH38 5047055CSM 1
WELD, HANDLE MOTION CONTROL-RH39 5047056CSM 1
WASHER, 5/16" LOCK40 5025170SM 4
GRIP, FOAM, 3/4 ID, 16 LONG41 5022068SM 2
GUARD, RUBBER MOT CTRS - IS500Z42 5100948SM 2
PUSH RIVET (TREE TYPE), BLACK43 5025431SM 4
SPRING, EXTENSION44 5020639SM 2
The above parts group applies to the following Mfg. Nos.:
19
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S

Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301479
The above parts group applies to the following Mfg. Nos.:
20
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690444 - Citation
2690445 - Citation
TP 400-7287-S-CI-S