Simpnic SiMP Plug User manual

SiMP Plug
Quick Installation Guide
SPG-US-SW

1. Package Content
2. Get Started
2.1 Preparation
2.2 Power On and Installation
2.3 Pairing
2.4 Reset
3. FAQ
4.Support

1. Package Content
Smart Plug
Quick Installation Guide
Warranty Card
SiMP Plug can only work with SiMPNiC SiMP
Keeper. Please make sure you already have
SiMPNiC SiMP Keeper. Otherwise SiMP Plug
can’t work.
For safety, please don’t use electric appliance
over 1600W on SiMP Plug.

2. Get Started
2.1 Preparation
Get your SiMPNiC SiMP Keeper ready and
download SiMPNiC App in advance.
To make SiMP Plug work,you need to set up
SiMPNiC SiMP Keeper first.Please refer to
SiMPNiC Smart Home Kit Quick Installation
Guide or tutorial in SiMPNiC App.
You can scan QR code below to download
SiMPNiC App from APP Store (iOS) or
Google Play (Android).

2.2 Power On and Installation
Plug SiMP Plug in socket.
After plugged in the socket, the LED indicator
of SiMP Plug will blink in blue rapidly (for 4
minutes).If it is not blinking, refer to “Reset”
section to return it to factory default settings.
2.3 Paring
Pairing SiMP Plug with your SiMP Keeper in
SiMPNiC App.
If your SiMP Plug is from Smart Home Kit,it
can be automatically added in your SiMPNiC
App.You can tap the "Room" icon at the
navigation bar and then you will see it.

① Make sure your smartphone is
connected to Home Wi-Fi (2.4GHz).
② Open SiMPNiC App.
③ Select "Room" icon.
④ Select "+" to add device.
⑤ Select "SiMP Plug".
⑥ SiMP Keeper will beep 2 times and
begin searching. The process lasts
about 45 sec (remember to check
indicator of SiMP Plug is blinking
during this period). And then
SiMP Plug will appear in the list.
⑦ If SiMP Plug is not found, select
"Cancel" and search again.

2.4 Reset
When power is on, please press the
side button for 5 seconds to reset it to
default settings. SiMP Plug indicator
will start blinking in blue (for about 4
minutes). During this period of time,
you can pair it.
Attention:
Once you reset, SiMP Plug will return
to factory default settings. Only if you
want remove it from SiMPNiC App,
otherwise it’s not suggested to reset.

3. FAQ
Q: Why SiMP Plug indicator is not
blinking?
A: If so, reset it to factory default
settings by press side button for
5 seconds.
Q: Why SiMP Plug can not be found
in the list?
A: First, make sure SiMP Plug indicator
is blinking in blue before pairing.
If it still can’t be found, try to
search again.
Q: How do I know SiMP Plug is paired
with SiMP Keeper successfully?
A: If SiMP Plug is paired successfully,
you will see it in your SiMPNiC App
after 45 seconds.

Q: Why the indicator light in Red?
A: If the indicator light in Red, for
safety, please reset it.

For more product information, FAQ, and
tutorials, please visit SiMPNiC website:
4. Support
Facebook pageYoutube

For More support, please contact us via
[email protected]

Ver. 201910