Sine Audio SauYin DS6801 User manual

E-mail:[e-mail]
User Manual
by Sine Audio
E N - 1
Powered Bookshelf Speakers
2.0 Channel Stereo

> Important notes
<DS6803> Please turn down the MIC VOL to the minimum, insert the
microphone, and then slowly turn the microphone to a suitable volume.
<DS6803> Treble / bass control knob for music only, and the treble /
bass for music cannot be controlled with the remote control.
<DS6803> Please turn down the MIC VOL to the minimum, then unplug the microphone.
To avoid hearing distorted sound, turn off your TV speakers (except for the headphone
socket connection), check the sound is only coming from the bookshelf speakers.
For optical (SPDIF) connection, please change your TV audio output to optical, and
change the audio format setting to PCM, and make sure the protective caps at the
ends of the optical cable are removed before plugging it in.
Remote control is not compatible with universal or TV remotes, and it is effective within 5
meters. Bass and Treble Not adjustable.
The bookshelf speakers does not support Dolby and DTS, please kindly disable the
Dolby and DTS via your TV audio setting or streaming video APP audio setting.
Lip sync or audio delay issue could be fixed via TVs audio delay settings.
For the better sound quality, please set the volume of the bookshelf speakers to 80
percent of maximum（Note: the maximum volume drop 2 levels is 80 percent） and set
the volume of your source device to a suitable level.
To get a better sound effect, press the movie, music or news button on the remote
control to select a suitable sound mode.
For audio cable connection, you can boost / restore the volume by double clicking the
boost button on the remote control.
The audio output of the bookshelf speakers is affected by the settings of the connected
source.If necessary, adjust the settings of the source to improve the audio output.
Not all remote control function buttons can be found on the bookshelf speakers. Please
keep the remote control properly.
Disconnect the power adapter from the electrical outlet to power off your speakers completely.
Do not make unauthorized alterations to the system, doing so may
compromise safety, regulatory compliance, and may void the warranty.
This system contains magnetic material, contact your physician if you have
questions on whether this might affect the operation of your implantable medical device.
> Warranty information
The warranty period for this product is 12 months from the date of its original purchase. If
manufacturing defects occur, please contact your dealer at the first time, we will instruct
you on how to return the defective unit back to us for repair or replacement.
E N - 2

The following are excluded from the Sine Audio warranty coverage:
Product over warranty.
Damage resulted from misuse and abusive action.
Damage resulted from chemical, fire, radioactive substance, and poison, liquid.
Damage resulted from natural disaster.
Remove all packaging and check for the presence of all parts and for transport damage.
In case of damage or incomplete delivery, please contact your dealer.
Please keep the packaging. The system can be stored in it, if not used for a longer
period of time.
Make sure the power adapter is disconnected from the electrical outlet before making
any mounting and connection.
During operation, if the cables require to be reconnected, the power adapter must be
disconnected first, otherwise damage to the system may result.
> FCC information
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Changers or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of more of the following
measure:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
10mm between the radiator and your body.
E N - 3

> Package Contents
1 X Bookshelf speakers - pair
Accessories:
1 X Power adapter
1 X Optical cable
1 X 3.5mm RCA audio cable
1 X Remote control
1 X User manual
1 X Speaker wire cable
Note: Accessories are subject to change without notice.
> Features
2.0 channel stereo two way speaker system
5 inches woofer and 0.8 inches tweeter
Analog audio interface ( AUX input )
Digital audio interface ( optical input and coaxial input )
Stream music from smart phone or tablet
Full function infrared remote control
Digital controlled audio processing sound mode
Subwoofer output
>> DS6802 / DS6803
6.35mm microphone input and mixing function
Built-in microphone amplifier circuit
Digital frequency shift anti-howling design
Bass /treble control knob for music
Three reverb effects: party, singing, speech (remote control )
Independent mute control for microphone (remote control )
Treble control for microphone input (remote control )
Volume control knob for microphone input
> Specifications
Power adapter Input :
Output :
100-240VAC 50/60Hz
18V 2A OCP 4.2A
Output power :
Signal to noise ratio :
Frequency response :
Total harmonic distortion :
Standby power :
40W X 2
80dB (A-weighting )
45Hz –20KHz
0.5% (20KHz LPF)
< 0.5W
Note: Specifications are subject to change without notice.
E N - 4

> System Overview
D S 6 8 0 1
D S 6 8 0 3 D S 6 8 0 2 ( W i t h o u t K e y P a n e l )
E N - 5

D S 6 8 0 1
D S 6 8 0 3
E N - 6
Connect the left and right speakers
via supplied speaker wire cable.
Connect the left and right speakers
via supplied speaker wire cable.

>> Buttun Panel
Power Mode Vol - Vol +
(Play Pause / Mute) (Source)
Press the Mode (Source) button to toggle between the AUX, BT, COAX, OPT sources,
The AUX, BT, COAX, OPT source indicator will light up red accordingly.
>> Knob panel （DS6802 / DS6803）
Music treble control
Music bass control
MIC volume control
6.35mm MIC input
Power on / off : Press and hold 1S
Play Pause / Mute : Short click
E N - 7
Please turn down the MIC volume to
the minimum, insert the microphone,
and then slowly turn the microphone to
a suitable volume.
Treble/bass control knob for music
only, and the bass/treble for music
cannot be controlled with the remote
control.
Please turn down the MIC volume to the
minimum, then unplug the microphone.

>> Source indicators
Remote sensor
AUX BT Standby COAX OPT
>> Rear Panel
Connect the left and
right speakers via supplied
speaker wire cable.
Speaker wire Terminal Clip
3.5mm AUX input
RCA(L/R) input
Coaxial input
Optical input
DC18V input
Subwoofer out
Subwoofer output
The subwoofer output is
only used to connect the
powered subwoofer.
E N - 8

>> Remote control
Caution!
Not all remote control function buttons can be found on the bookshelf
speakers. Please keep the remote control properly.
30 degree
Approx. 16.5 feet (5 meters)
Operation Range
When there is an obstacle
between the remote sensor of the
bookshelf speakers and the remote
control, the remote control may not
operate.
Notes:
When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the remote sensor of
the bookshelf speakers, the
operation of the remote control
may be unstable.
30 degree
20. Power
21. Bluetooth
23. Volume +
24. Previous
27. Volume -
28. Movie
31. Optical
33. AUX / boost
22. Mute
25. Play Pause / Mute
26. Next
29. Music
30. News
32. COAX
For audio cable
connection, you can
boost / restore the
volume by double
clicking the boost
button.
Press and hold the BT button for
about 2 seconds to disconnect the
current Bluetooth device.
E N - 9
Mic Treb - (DS6802/3)
Mic Treb + (DS6802/3)
Music Vol + (DS6802/3)
Music Vol - (DS6802/3)
Mic Mute (DS6802/3)
Music Mute (DS6802/3)
Party movie (DS6802/3)
Singing music (DS6802/3)
Speech news (DS6802/3)

> Setting up the system
>> Digital audio (SPDIF) connection
Use the supplied optical cable or Coaxial cable ( not supplied ) to connect the bookshelf
speakers to a TV, DVD, Blu-Ray Player or other suitable devices.
Connect one end to the optical or coaxial (SPDIF) out socket of the TV, DVD, Blu-Ray
Player or other suitable devices.
Connect the other end to the optical or coaxial input socket of the bookshelf speakers.
Note: For optical (SPDIF) connection, please change your TV audio output to optical, and
change the audio format setting to PCM, and make sure the protective caps at the ends of
the optical cable are removed before plugging it in.
> Setting up the system
>> Audio cable connection
Use the supplied 3.5mm RCA Audio cable to connect the bookshelf speakers to a TV,
DVD, Blu-Ray Player or other suitable devices.
Connect one end to the audio out or line out sockets of the TV, DVD, Blu-Ray Player or
other suitable devices.
Digital OUT
(SPDIF)
Coaxial
Optical
I N P U T
OPT
COAX
R AUX L
AUX
Optical cable
Coaxial cable
( not supplied )
E N - 1 0
The bookshelf speakers does not
support Dolby and DTS, please kindly
disable the Dolby and DTS via your TV
audio setting or streaming video APP
audio setting.
Lip sync or audio delay issue could be
fixed via TVs audio delay settings.

Connect the other end to the 3.5mm AUX input sockets of the bookshelf speakers.
Note: For audio cable connection, you can boost / restore the volume by double clicking
the boost button on the remote control.
> Using the system
>> Using the remote control >>> Inserting/replacing batteries
1. Slide to open the battery compartment cover.
2. Insert 2 X 1.5V AAA batteries (not supplied) into the battery compartment. Match the
polarity markings in the battery compartment.
3. Close the battery compartment cover.
R L
Audio OUT
(Line OUT)
AUX
3.5mm INPUT
Headphone
RCA INPUT
R AUX L
If your TV or other source device only has a
3.5mm headphone socket, use the 3.5mm
RCA audio cable to connect the bookshelf
speakers to your TV or other source devices.
Connect one end to the 3.5mm headphone
socket of the TV or other source devices.
Connect the other end to the AUX(L/R) input
sockets of the bookshelf speakers.
Ensure your TV speakers are turned on. Refer
to your TV’s user manual for more information.
Set your TV or other source device’s volume to
the maximum.
3.5mm RCA Audio Cable
E N - 1 1

Caution!
The bookshelf speakers can only work with the remote control
package included, not compatible with universal remote control.
Always insert the batteries according to the correct polarity markings.
Use only high quality batteries, low quality batteries might leak and cause damage.
Remove the batteries from the remote control if you are not using it for an extended
period. The remote control could become damaged in case of battery leakage.
>>> Tips for usage
If the remote control does not work properly, replace the batteries.
Make sure there are no obstacles between the remote control and bookshelf speakers.
The remote control may be less effective if:
1. There are obstacles between the remote control and the infrared receiver.
2. Other remote controls are operated at the same time.
3. The battery power is low.
> Using the system >> Get power and started
Make sure all the source connections are made properly before you connect the power
adapter. Plug the power adapter to the DC IN socket, then to a suitable electrical outlet.
The power indicator lights up red. Indicating the bookshelf speakers is in standby mode.
Turning off your TV speakers: To avoid hearing distorted sound, turn off your TV
speakers (except for the headphone socket connection ， Refer to “Audio cable
connection ”for more information).
Power on your bookshelf speakers: Press the Power button on the remote control. The
power indicator lights up orange.
Check if sound is coming from the bookshelf speakers.
1
3
2
E N - 1 2

>> Selecting a digital controlled audio processing sound mode
The digital controlled audio processing includes three sound mode: movie, music and
news.（Note:There is no sound mode indication on the bookshelf speakers)
To get a better sound effect, press the movie, music or news button on the remote
control to select a suitable sound mode.
The recommended sound mode selections as below:
Program source
Sound mode
Program source
Sound mode
Strong bass film
Music or news
Strong bass music
Music or news
General film
Movie or music
Pop music
Movie or Music
Documentary
Music or news
Light music
Music or news
Variety show
Music or news
News / Dialog
Music or news
Notes:
For the better sound quality, please set the volume of the bookshelf speakers to 80
percent of maximum（Note: the maximum volume drop 2 levels is 80 percent）and set
the volume of your source device to a suitable level.
The sound mode selection and the volume settings are saved in the memory even after
the bookshelf speakers is powered off, and the volume setting from 80 percent to
maximum will be saved to 80 percent.
Set the volume of your source device to a low level before switching on the bookshelf
speakers. Then increase the volume of your source device to a comfortable level.
Disconnect the power adapter from the electrical outlet to power off your speakers completely.
> Using the System >> Basic functions
You can have several source devices connected permanently to the bookshelf speakers.
Available sources are: OPT / COAX / BT / AUX
Source
Function
OPT
Optical , connection with an optical fiber cable.
COAX
Coaxial, connection with a coaxial cable.
BT
Bluetooth, Connection to a Bluetooth Device.
AUX
Auxiliary, Connection with a RCA to RCA audio cable.
Auxiliary, Connection with a 1/8 inch(3.5mm) to RCA audio cable.
Press the AUX, BT, COAX, OPT button on the remote control to toggle between the
sources, The AUX, BT, COAX, OPT source indicator will light up red accordingly.
You can boost / restore the volume by double clicking the boost button on the remote
control when you use AUX source (audio cable connection).
E N - 1 3

Notes:
The volume boost / restore and mode (source) selections are saved in the memory
even after the bookshelf speakers is powered off.
The audio output of the bookshelf speakers is affected by the settings of the connected
source. If necessary, adjust the settings of the source to improve the audio output.
> Using the System >> Bluetooth function
External Bluetooth devices can be connected to the TV bookshelf speakers system via
Bluetooth connection.
1. Press the BT button on the remote control to enter the Bluetooth mode. The Bluetooth
indicator lights up red.
2. Activate the Bluetooth function of the external device and search for Bluetooth devices.
3. Select the bookshelf speakers (Sine Audio) from the Bluetooth device list.
4. Follow the instructions shown on your device’s screen.
5. When the Bluetooth connection is established, files from your connected Bluetooth
device will be played through the bookshelf speakers.
>> Disconnecting the Bluetooth device:
Press the OPT, COAX or AUX button on the remote control to enter AUX, OPT or
COAX mode.
Disconnect using your Bluetooth device. The bookshelf speakers starts searching for
another Bluetooth device.
Long press the BT button on the remote control about 2 seconds to disconnect the
current Bluetooth device. Long press again to reconnect the current Bluetooth device.
Notes:
If you cannot pair your Bluetooth device,you may need to remove the bookshelf speakers
from the pairing list, and try pairing again (see “Troubleshooting ”for more information).
Bluetooth works best within a range of up to 33 feet (10 meters).
The music streaming may be interrupted by obstacles between the Bluetooth device
and bookshelf speakers, such as walls, metallic casing that covers the device, or other
devices nearby that operate in the same frequency.
If the connected device goes out of Bluetooth range, the system will reconnect
automatically when the device comes back within range.
The current Bluetooth device connection is saved in the memory even after the
bookshelf speakers is powered off.
E N - 1 4

> Troubleshooting
Problem
Solution
No power
Check the power adapter is properly connected to an electrical outlet.
Check the DC plug is properly connected to the DC IN socket.
Unplug the power adapter for at least one minute and reconnect.
No Sound
Press the Power button on the remote control to turn on the
bookshelf speakers. The power indicator lights up orange.
Press MUTE button on the remote control to restore sound.
Ensure that the source device has correct volume settings and is
playing a track.
Ensure the correct source device is selected.
Plug the audio cable into a connector on your TV labeled Line OUT or
Audio OUT, not Line IN or Audio IN.
Digital audio (SPDIF) connection:
Plug the optical cable into a connector on your TV labeled Optical
OUT or Digital OUT, not Optical IN or Digital IN.
Plug the RCA cable into a connector on your TV labeled Coaxial OUT
SPDIF OUT or Digital OUT, not Coaxial IN, SPDIF IN or Digital IN.
Activate PCM (Pulse Code Modulation) in the audio settings menu of
your source device(see your source device’s user manual).
Connect to the headphone socket of TV:
Increase your TV’s volume to maximum.
Turn on your TV speakers, Refer to your TV’s user manual for more
information.
Poor audio
quality
Press the movie, music or news button on the remote control to
select a suitable sound mode.
Set the volume of the bookshelf speakers to 80 percent of maximum
（Note: the maximum volume drop 2 levels is 80 percent）.
Secure cable connections on the bookshelf speakers and TV (or
other connected sources).
Try with different source devices. If the problem still exists, check the
cable connections.
Ensure that the cables connected to the source devices are correctly
plugged in and the plugs are fully inserted.
E N - 1 5

> Troubleshooting
Problem
Solution
Poor audio
quality
Reduce the volume of your source device.
Audio cable connection:
Double clicking the boost button on the remote control to restore the
volume.
Bluetooth connection:
Bring the Bluetooth device closer to the bookshelf speakers and
make sure that no obstacles are disturbing the connection.
Remote
control does
not work
Ensure that the batteries are correctly inserted; if necessary, replace
the batteries.
Bring the remote control closer to the bookshelf speakers and make
sure there are no obstacles in between. Ensure the remote control is
within 16.5 feet (5 meters) of the system.
Aim the remote control directly at the infrared receiver of the system.
System
doesn’t react
It is malfunction probably due to electrostatic discharge.
Unplug the power adapter for at least one minute and reconnect.
Bluetooth
device cannot
be connect
to the books-
helf speakers
Bring the Bluetooth device closer to the bookshelf speakers.
Switch off your device and/or bookshelf speakers, then back on,
repeat the pairing process.
Make sure the speakers is not connected another Bluetooth device.
Make sure that you have selected the bookshelf speakers from the
Bluetooth device list on your device.
Ensure you are using the correct device.
If the device is still not connected, try the following:
Remove the bookshelf speakers (Sine Audio) from the list of “paired
devices”on your phone/tablet.
Turn the bookshelf speakers off and then on again.
Pair it again with your phone/tablet. It should now successfully
establish the pairing.
Note: If none of the above solutions works, the Bluetooth device may be
malfunctioning. Try another Bluetooth device. If not even the new device
can be connected, the bookshelf speakers may be malfunctioning. In
this case, please consult your dealer for repair.
EN - V1.4
Printed in China (2022)
E N - 1 6