Singer 2282 User manual

SEWING MACHINE 2282
NÄHMASCHINE
Bedienungs- und Sicherheitshinweise
SEWING MACHINE
Operation and safety notes
IAN 315328

GB / IE / NI Operation and safety notes Page 5
DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 31








   




























5GB/IE/NI
Table of contents
Introduction
Congratulations...................................................................................................................................Page 6
Principle Parts of the Machine............................................................................................................Page 6
Accessories..........................................................................................................................................Page 6
Technical Data ....................................................................................................................................Page 7
Important Safety Instructions........................................................................................Page 8
Machine Basics
Connecting Machine to Power Source..............................................................................................Page 12
Two Step Presser Foot Lifter................................................................................................................Page 12
Threading the Machine
Winding the Bobbin............................................................................................................................Page 13
Inserting the Bobbin ............................................................................................................................Page 14
Thread Tension....................................................................................................................................Page 15
Threading the Upper Thread..............................................................................................................Page 16
Automatic Needle Threader...............................................................................................................Page 17
Raising the Bobbin Thread .................................................................................................................Page 17
Sewing
How to Choose Your Pattern..............................................................................................................Page 18
Stitch Width Dial & Stitch Length Dial................................................................................................Page 19
Sewing Straight Stitch.........................................................................................................................Page 20
Reverse Sewing / Removing the Work /Cutting the Thread.............................................................Page 20
Choosing Stretch Stitch Patterns.........................................................................................................Page 21
Blind Hem............................................................................................................................................Page 22
Sew 1-step Buttonhole ........................................................................................................................Page 23
Sewing on Buttons ..............................................................................................................................Page 24
General Information
Installing the Removable Extension Table .........................................................................................Page 25
Attaching the Presser Foot Shank.......................................................................................................Page 25
Needle / Fabric / Thread Chart..........................................................................................................Page 26
Darning Plate.......................................................................................................................................Page 26
Maintenance and Trouble shooting
Inserting & Changing Needle ............................................................................................................Page 27
Trouble Shooting Guide .....................................................................................................................Page 28
Disposal............................................................................................................................................Page 29
Warranty.........................................................................................................................................Page 29
Service Address.........................................................................................................................Page 29
Declaration of Conformity................................................................................................Page 29

6 GB/IE/NI
28
Introduction
GB / IE
8

7GB/IE/NI
29
Introduction
GB/IE
1.8 m
1.4 m
5.2

8 GB/IE/NI
30
Important Safety Instructions
GB / IE
and foot control free from the accumulation of lint, dust, and
loose cloth.
-
required around the sewing machine needle.
- Always use the proper needle plate. The wrong plate can
cause the needle to break.
- Do not use bent needles.
-
needle causing it to break.
- Wear safety glasses.
- Switchthe sewing machine off (“0”) when making any adjust-
ment in the needle area, such as threading needle, changing
needle, threading bobbin, or changing presser foot, etc.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used
or where oxygen is being administrated.
- To disconnect, turn all controls tothe off (“0”) position, then
remove plug from outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
- The foot control is used to operate the machine. Avoid placing
other objects on the foot control.
- Do not use the machine if it is wet.
- If the supply cord connected with the foot control is damaged,
it must be replaced by the manufacturer or its service agent
- This sewing machine is provided with double insulation. Use
only identical replacement parts. See instructions for Servicing
of Double-Insulated Appliances.
30
Important Safety Instructions
GB / IE
This household sewing machine is designed to comply with
IEC/EN 60335-2-28 and UL1594.
IMPORTANT SAFETYINSTRUCTIONS
When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all instructions before using this household sewing machine.
Keep the instructions in a suitable place close tothe machine.
Make sure to hand them over if the machine is given toathird
party.
DANGER – To reduce the risk of electric shock:
- A sewing machine should never be left unattended when plug-
ged in. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning, removing
covers, lubricating or when making any other user servicing
adjustments mentioned in the instruction manual.
- If the LED lamp is damaged or broken, it must be replaced by
the manufacturer or its service agent or a similarly qualified
person, in order to avoid a hazard.
or injury to person:
- Do not allow to be used as a toy. Close attention is necessary
when this sewing machine is used by or near children.
- Use this sewing machine only for its intended use as described
in this manual. Use only attachments recommended by the
manufacturer as contained in this manual.
- Never operate this sewing machine if it has a damaged cord
or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the sewing machine
to the nearest authorized dealer or service center for exami-
nation, repair, electrical or mechanical adjustment.
- Never operate the sewing machine with any air openings
blocked. Keep ventilation openings of the sewing machine

9GB/IE/NI
30
Important Safety Instructions
GB / IE
and foot control free from the accumulation of lint, dust, and
loose cloth.
-
required around the sewing machine needle.
- Always use the proper needle plate. The wrong plate can
cause the needle to break.
- Do not use bent needles.
-
needle causing it to break.
- Wear safety glasses.
- Switchthe sewing machine off (“0”) when making any adjust-
ment in the needle area, such as threading needle, changing
needle, threading bobbin, or changing presser foot, etc.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used
or where oxygen is being administrated.
- To disconnect, turn all controls tothe off (“0”) position, then
remove plug from outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
- The foot control is used to operate the machine. Avoid placing
other objects on the foot control.
- Do not use the machine if it is wet.
- If the supply cord connected with the foot control is damaged,
it must be replaced by the manufacturer or its service agent
- This sewing machine is provided with double insulation. Use
only identical replacement parts. See instructions for Servicing
of Double-Insulated Appliances.

10 GB/IE/NI
30
Important Safety Instructions
GB / IE
ForEuropeonly:
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
The noise level under normal operating conditions is less than
75dB(A).
The machine mustonly be used with foot control of type FC-1902,
KD-1902 (110-120V area) / FC-2902A, FC-2902D, KD-2902
(220-240V area) manufactured by ZHEJIANG FOUNDER MOTOR
CORPORATION LTD. (China) / 4C-316B (110-125V area) /
4C-326G (230V area) manufactured by Wakaho Electric Ind. Co.,
Ltd. (Vietnam)
ForoutsideEurope:
This sewing machine is not intended for use by persons (inclu-
ding children) with reduced physical, sensory or mental capabi-
lities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the se-
wing machine by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the
sewing machine.
The noise level under normal operating conditions is less than
75dB(A).
The machine mustonly be used with foot control of type FC-1902,
KD-1902 (110-120V area) / FC-2902A, FC-2902D, KD-2902
(220-240V area) manufactured by ZHEJIANG FOUNDER
MOTOR CORPORATION LTD. (China) / 4C-316B (110-125V
area) / 4C-326G (230V area) manufactured by Wakaho
Electric Ind. Co., Ltd. (Vietnam)
SAVE THESE INSTRUCTIONS

11GB/IE/NI
30
Important Safety Instructions
GB / IE
In a double-insulated product, two systems of insulation are
provided instead of grounding. No ground means is provided on
a double-insulated product, nor should a means for grounding
be added tothe product. Servicing of a double-insulated product
requires extreme care and knowledge of the system and should
for a double-insulated product must be identical tothose parts in
the product. A double-insulated product is marked with the
words ‘DOUBLE INSULATION’ or ‘DOUBLE INSULATED’.
SERVICING OF DOUBLE INSULATED PRODUCTS

12 GB/IE/NI
31
Machine Basics
GB/IE

13GB/IE/NI
Threading the Machine
32
GB / IE
31
Machine Basics
GB/IE

14 GB/IE/NI
Threading the Machine
33
GB/IE

15GB/IE/NI
Threading the Machine
34
GB / IE

16 GB/IE/NI
1
2
4
7
5
6
8
3
Threading the Machine
35
GB/IE

17GB/IE/NI
Threading the Machine
36
GB / IE

18 GB/IE/NI
37
Sewing
c
d
a b
B KIA DC J E GF H
S1
S2
GB/IE

19GB/IE/NI
Sewing
38
GB / IE

20 GB/IE/NI
A
B
2
3
1
Sewing
21
39
GB/IE