Singer 3210 User manual

Instruction Manual
3210
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

This household sewing machine is designed to comply with IEC/EN 60335-2-2 and UL1594.
When using an electrical appliance, basic safety precautions should always be followed, including
the following:
Read all instructions before using this household sewing machine. Keep the instructions in a
suitable place close to the machine. Make sure to hand them over if the machine is given to a third
party.
- A sewing machine should never be left unattended when plugged in. Always unplug this sewing
machine from the electric outlet immediately after using and before cleaning, removing covers,
lubricating or when making any other user servicing adjustments mentioned in the instruction
manual.
- Always unplug before re-lamping. Replace bulb with same type rated 10 watts (110-120V area) or
15 watts (220-240V area).
IMPORTANT SAFETY INSTRUCTIONS
DANGER
WARNING -
-To reduce the risk of electric shock :
To reduce the risk of burns, fire, electric shock, or injury to
person :
- Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used
by or near children.
- Use this sewing machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
I
IMPORTANT AFETY IN TRUCTION
All manuals and user guides at all-guides.com

- Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water. Return the sewing machine to the
nearest authorized dealer or service center for examination, repair, electrical or mechanical
adjustment.
- Never operate the sewing machine with any air openings blocked. Keep ventilation openings of
the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.
- Keep fingers away from all moving parts. Special care is required around the sewing machine
needle.
- Always use the proper needle plate. The wrong plate can cause the needle to break.
- Do not use bent needles.
- Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
- Wear safety glasses.
- Switch the sewing machine off (" ") when making any adjustment in the needle area, such as
threading needle, changing needle, threading bobbin, or changing presser foot, etc.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being
administrated.
- To disconnect, turn all controls to the off (" ") position, then remove plug from outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- The foot control is used to operate the machine. Avoid placing other objects on the foot control.
- Do not use the machine if it is wet.
- If the supply cord connected with the foot control is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard.
- This sewing machine is provided with double insulation. Use only identical replacement parts.
See instructions for Servicing of Double-Insulated Appliances.
O
O
II
All manuals and user guides at all-guides.com

AVE THE E IN TRUCTION
For Europe only :
This appliance can be used by children aged from years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
The noise level under normal operating conditions is less than 75dB(A).
The machine must only be used with foot control of type FC-1902, KD-1902 (110-120V area) / FC-
2902A, FC-2902D, KD-2902 (220-240V area) ZHEJIANG FOUNDER MOTOR
CORPORATION LTD. (China) / 4C-316B (110-125V area)/ 4C-326G (230V area)
Wakaho Electric Ind. Co., Ltd. (Vietnam)
This sewing machine is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the sewing machine by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the sewing machine.
The noise level under normal operating conditions is less than 75dB(A).
The machine must only be used with foot control of type FC-1902, KD-1902 (110-120V area) / FC-
2902A, FC-2902D, KD-2902 (220-240V area) ZHEJIANG FOUNDER MOTOR
CORPORATION LTD. (China) / 4C-316B (110-125V area)/ 4C-326G (230V area)
Wakaho Electric Ind. Co., Ltd. (Vietnam)
For outside Europe :
manufactured by
manufactured by
manufactured by
manufactured by
III
All manuals and user guides at all-guides.com

ERVICING OF DOUBLE IN ULATED PRODUCT
In a double-insulated product, two systems of insulation are provided instead of grounding. No
ground means is provided on a double-insulated product, nor should a means for grounding be
added to the product. Servicing of a double-insulated product requires extreme care and
knowledge of the system and should be done only by qualified service personnel. Replacement
parts for a double-insulated product must be identical to those parts in the product. A double-
insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED".
IV
All manuals and user guides at all-guides.com
all-guides.com

Congratulations
As the owner of a new Singer sewing machine, you are about to begin an exciting adventure in
creativity. From the moment you first use your machine, you will know you are sewing on one
of the easiest to use sewing machines ever made.
May we recommend that, before you start to use your sewing machine, you discover the many
features and the ease of operation by going through this instruction book, step by step, seated
at your machine.
To ensure that you are always provided with the most modern sewing capabilities, the
manufacturer reserves the right to change the appearance, design or accessories of this
sewing machine when considered necessary.
SINGER is the exclusive trademark of The Singer Company Limited S.à.r.l. or its Affiliates.
©2015 The Singer Company Limited S.à.r.l. or its Affiliates. All rights reserved.
V
All manuals and user guides at all-guides.com

List of contents
Machine Basics
Threading the Machine
ewing
General Information
Maintenance and Troubleshooting
Principle Parts of the Machine..............................................................................................................................................2/3
Connecting Machine to Power Source ....................................................................................................................................4
Two Step Presser Foot Lifter...................................................................................................................................................5
Accessories .............................................................................................................................................................................6
Winding the Bobbin .................................................................................................................................................................7
Inserting the Bobbin ................................................................................................................................................................
Thread Tension .......................................................................................................................................................................9
Threading the Upper Thread .................................................................................................................................................10
Raising the Bobbin Thread....................................................................................................................................................11
How to Choose Your Pattern.................................................................................................................................................12
Length Dial ..................................................................................................................................................................13
Sewing Straight Stitch ...........................................................................................................................................................14
Reverse Sewing/ ...................................................................................................15
Blind Hem..............................................................................................................................................................................16
..........................................................................................................................................................17
Sewing on Buttons ................................................................................................................................................................1
Installing the Removable ........................................................................................................................19
Attaching the Presser Foot Shank.........................................................................................................................................20
Needle/Fabric/Thread Chart..................................................................................................................................................21
Darning Plate.........................................................................................................................................................................22
Inserting & Changing Needle ................................................................................................................................................23
Changing the Bulb.................................................................................................................................................................24
Troubleshooting Guide ..........................................................................................................................................................25
Stitch
Removing the Work/ Cutting the Thread
Sew 4-Step Buttonhole
Accessory Storage
VI
All manuals and user guides at all-guides.com

Principal Parts of the Machine
2
1. Thread tension dial
2. Thread take-up lever
3. Thread cutter
4. Presser foot
5. Needle plate
6. Removable accessory storage
7. Reverse sewing lever
. Bobbin stopper
9. Stitch length dial
10. Pattern selector dial
1
2
3
5
6
7
8
10
9
4
All manuals and user guides at all-guides.com

3
Principal Parts of the Machine
11. Horizontal spool pin
12. Bobbin winding spindle
13. Hole for second spool pin
14. Handwheel
15. Power and light switch
16. Main plug socket
17. Bobbin thread guide
1 . Upper thread guide
19. Face plate
20. Handle
21. Presser foot lifter
22. Foot speed control
23. Power cord
22
23
15
16
11
12
14
13
17
18
19
21
20
All manuals and user guides at all-guides.com

23
Connecting Machine to Power ource
4
1
A
Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must
be used with the appropriate polarized outlet. (2)
Unplug power cord when machine is not in use.
The foot control pedal regulates the sewing speed. (3)
Consult a qualified electrician if in doubt of how to connect
machine to power source.
Unplug power cord when machine is not in use.
Press main switch (A) to " l " for power and light.
For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be grounded
Attention:
Foot control
Attention:
ewing light
IMPORTANT NOTICE
a
b
All manuals and user guides at all-guides.com
all-guides.com

Two tep Presser Foot Lifter
5
A
When sewing several layers or thick fabrics, the presser foot
can be raised for easy positioning of the
work. (A)
to a higher position
All manuals and user guides at all-guides.com

6
Accessories
1 tandard accessories
rs
00601600006 1200
2 Optional accessories
m
n
po
006 0400 006 0300 006 0000
q
006 1000
00691700
tu
00691600 006 1500
v
h
g
ef
ij k
a
006 0600
b
00690500
d
00691400
tandard accessories (1)
Optional accessories (2)
a. All purpose foot
b. Zipper foot
c. Buttonhole foot
d. Button sewing foot
e. Seam ripper/ brush
f. Edge/ quilting guide
g. Pack of needle
h. Spool holder
i. Bobbin (3x)
j. L-screwdriver
k. Darning plate
l. Soft cover
(These 10 accessories are not supplied with this machine;
they are however available as special accessories from your
local dealer.)
m. Auxiliary spool pin
n. Satin stitch foot
o. Overcasting foot
p. Hemmer foot
q. Cording foot
r. Blind hem foot
s. Darning/ embroidery foot
t. Gathering foot
u. Quilting/ straight stitch foot
v. Even-feed foot
l
c
00690900
All manuals and user guides at all-guides.com

7
Winding the Bobbin
- corresponding .
(1/2)
- Snap thread into thread guide. (3)
- Wind thread clockwise around bobbin winder tension discs.
(4)
- Thread bobbin as illustrated and place on spindle. (5)
- Push bobbin spindle to right. (6)
- Hold thread end. (7)
- Step on foot control pedal. ( )
- Cut thread. (9)
- Push bobbin spindle to left (10) and remove.
When the bobbin winder spindle is in "bobbin winding"
position, the machine will not sew and the hand wheel will
not turn. To start sewing, push the bobbin winder spindle to
the left (sewing position).
Please Note:
Place thread and spool holder on to spool pin
1
2
4
789
56
3
10
All manuals and user guides at all-guides.com

2
6
345
a
Inserting the Bobbin
When inserting or removing the bobbin, the needle must
be fully raised.
Attention:
- Remove the extension table, then open the hinged cover.
(1)
- Pull the bobbin case tab (a) and remove the bobbin case. (2)
- Hold the bobbin case with one hand. Insert the bobbin so
that the thread runs in a clockwise direction (arrow). (3)
- Pull the thread through the slit and under the finger. (4)
Leave a 6 inch tail of thread.
- Hold the bobbin case by the hinged latch. (5)
- Insert it into the shuttle. (6)
Turn power switch to off ("O") before inserting or
removing the bobbin.
1
All manuals and user guides at all-guides.com

9
BA
CD
12
Thread Tension
Upper thread tension
Lower thread tension
Please note:
Basic thread tension setting: "4"
To increase the tension, turn the dial to the next number up.
To reduce the tension, turn the dial to the next number down.
A. Normal thread tension for straight stitch sewing.
B. Thread tension too loose for straight stitch sewing. Turn dial
to higher number.
C. Thread tension too tight for straight stitch sewing. Turn dial to
lower number.
D. Normal thread tension for zig zag and decorative sewing.
Correct thread tension is when a small amount of the upper
thread appears on the bottom side of fabric.
To test the bobbin thread tension, remove the bobbin case and
bobbin and hold it by suspending it by the thread. Jerk it once or
twice. If the tension is correct, the thread will unwind by about an
inch or two. If the tension is too tight, it does not unwind at all. If
the tension is too loose, it will drop too much. To adjust, turn the
small screw on the side of the bobbin case.
- Proper setting of tension is important to good sewing.
- There is no single tension setting appropriate for all stitch
functions, thread or fabric.
- A balanced tension (identical stitches both top and bottom) is
usually only desirable for straight stitch construction sewing.
- 90% of all sewing will be between "3" and "5".
- For zig zag and decorative sewing stitch functions, thread
tension should generally be less than for straight stitch sewing.
- For all decorative sewing you will always obtain a nicer stitch
and less fabric puckering when the upper thread appears on
the bottom side of your fabric.
All manuals and user guides at all-guides.com
all-guides.com

10
Threading the Upper Thread
This is a simple operation but it is important to carry out correctly
as by not doing so .
- Start by raising the needle to its highest point (1), and continue
turning the handwheel counterclockwise until the needle just
slightly begins to descend. Raise the presser foot to release
the tension discs.
For safety, it is strongly suggested you turn off the
power before threading.
- Lift up the spool pin. Place the spool of thread on the holder
with the thread coming off the spool as shown. For small
thread spools, place small side of spool holder next to spool.
(2)
- Draw thread from spool through the upper thread guide (3)
and pulling thread through pre-tension spring as illustrated. (4)
- Thread tension module by leading thread down right channel
and up left channel. (5) During this process it is helpful to hold
the thread between the spool and thread guide.
- At the top of this movement pass thread from right to left
through the slotted eye of the take-up lever and then
downwards again. (6)
-
( )
several sewing problems could result
Note:
Now pass thread behind the thin wire needle clamp guide (7)
and then down to the needle which should be threaded from
front to back.
- Pull about 6- inches of thread to the rear beyond the needle
eye. Trim thread to length with built in thread cutter. 68
7
5
4
23
All manuals and user guides at all-guides.com

11
Raising the Bobbin Thread
Hold the upper thread with the left hand. Turn the handwheel
(1) towards you (counterclockwise) lowering, then raising
needle.
If it is difficult to raise the bobbin thread, check to make sure
the thread is not trapped by the hinged cover or the
.
Gently pull on the upper thread to bring the bobbin thread up
through the needle plate hole. (2)
Lay both threads to the back under the presser foot. (3)
Note:
removable accessory storage
1
23
All manuals and user guides at all-guides.com

How to Choose Your Pattern
12
c
ab
To select a stitch, simply turn the pattern selector dial (c).
The pattern selector dial may be turned in either direction.
The following page shows the recommended range of stitch
lengths.
Adjust the stitch length with the stitch length dial (b)
according to the fabric being used.
a. Reverse lever
b. Stitch length dial
c. Pattern selector dial
2
43
1
All manuals and user guides at all-guides.com

13
titch Length Dial
1
34
Function of stitch length dial for when straight stitching
Function of stitch length dial while zig-zag stitching
For straight stitch sewing, turn the Pattern Selector Dial to
the straight stitch setting. (1) Turn the Stitch Length Dial, and
the length of the individual stitches will decrease as the dial
approaches "0". The length of the individual stitches will
increase as the dial approaches "4". (2) Generally speaking,
use a longer stitch length when sewing heavier weight
fabrics or when using a thicker needle or thread. Use a
shorter stitch length when sewing lighter weight fabrics or
when using a finer needle or thread.
The density of zig-zag stitches increases as the setting of
stitch length dial approaches "0".
Neat zig-zag stitches are usually achieved at "2.5" or below.
Dense zig-zag stitches are called satin stitches. (4)
Turn the Pattern Selector Dial to " ". (3)
2
4321
0.5
40.5
2
31
All manuals and user guides at all-guides.com