SINGTRONIC KA-1000DSP User manual

The apparatusis not disconnected from the AC power
source solong as it is connected tothe wall outlet ,even
if theapparatus itself is turned off. Tofully insure that
the apparatusis indeed fully void of residualpower, leave
unit disconnectedthe AC outletfor at least fifteen
seconds.
The apparatusis not disconnected from the AC power
source solong as it is connected tothe wall outlet ,even
if theapparatus itself is turned off. Tofully insure that
the apparatusis indeed fully void of residualpower, leave
unit disconnectedthe AC outletfor at least fifteen
seconds.
CAUTION :READ THIS BEFORE OPERATING YOUR UNITCAUTION :READ THIS BEFORE OPERATING YOUR UNIT
Please check thecopyright laws isyour country before
recording from records ,compact discs,radio etc.
Recording copyrighted material may infringe copyright laws.
.
Please check thecopyright laws isyour country before
recording from records ,compact discs,radio etc.
Recording copyrighted material may infringe copyright laws.
.
33
Safety InstructionsSafety Instructions
1.To ensure the finest performance ,please read this manual carefully ,keep it in a safe
place for future reference.
2.Install your unit in a cool .dry ,clean place - away from windows ,heat sources ,and
too much vibration .dust,moisture or cold Avoid sources of hum (transformers,
motors),To prevent fire or electrical shock ,do not expose to rain or water.
3.Do not operate the unit upside-down.
4.Never open the cabinet .if a foreign object drops into the set ,contact your deafer.
5.Place the unit in a location with adequate air circulation.Do not interfere with its proper
ventilation ;this will cause the internal temperature to rise and may result in a failure.
6.Do not use force on switches ,knobs or cords ,When moving the unit ,turn the unit off
first ,Then gently disconnect the power plug and the cords connecting to other
equipment.Never pull the cord itself.
7.Do not attempt to clean the unit with chemical solvents this might damage the finish
,Use a clean ,dry cloth.
8.Be sure to read the "Troubleshooting" section on common operating errors before
concluding that your unit is faulty.
9.This unit consumes a fair amount of power even when the power switch is turned off .We
recommend that you unplug the power cord from the wall outlet if the unit is not
going to be used for a long time .This will save electricity and help prevent fire hazards
.To disconnect the cord .pull it out by grasping the plug .Never pull the cord itself.
10.To prevent lightning damage ,pull out the power cord and remove the antenna cable
during an electrical storm.
11.The general signals may interfere with other equipment such as tuners or receivers
.Move the system farther away from such equipment if interference is observed.
1.To ensure the finest performance ,please read this manual carefully ,keep it in a safe
place for future reference.
2.Install your unit in a cool .dry ,clean place - away from windows ,heat sources ,and
too much vibration .dust,moisture or cold Avoid sources of hum (transformers,
motors),To prevent fire or electrical shock ,do not expose to rain or water.
3.Do not operate the unit upside-down.
4.Never open the cabinet .if a foreign object drops into the set ,contact your deafer.
5.Place the unit in a location with adequate air circulation.Do not interfere with its proper
ventilation ;this will cause the internal temperature to rise and may result in a failure.
6.Do not use force on switches ,knobs or cords ,When moving the unit ,turn the unit off
first ,Then gently disconnect the power plug and the cords connecting to other
equipment.Never pull the cord itself.
7.Do not attempt to clean the unit with chemical solvents this might damage the finish
,Use a clean ,dry cloth.
8.Be sure to read the "Troubleshooting" section on common operating errors before
concluding that your unit is faulty.
9.This unit consumes a fair amount of power even when the power switch is turned off .We
recommend that you unplug the power cord from the wall outlet if the unit is not
going to be used for a long time .This will save electricity and help prevent fire hazards
.To disconnect the cord .pull it out by grasping the plug .Never pull the cord itself.
10.To prevent lightning damage ,pull out the power cord and remove the antenna cable
during an electrical storm.
11.The general signals may interfere with other equipment such as tuners or receivers
.Move the system farther away from such equipment if interference is observed.
CAUTION:CAUTION: NOTE:NOTE: