SinoCon KonNad C2000-A1-SXD0020-BX3 User manual

Last updated: 2019-12-13
C2000-A1-SXD0020-BX3
User Manual
Ethernet → 2DO
Remote I/O Module — Ethernet Digital I/O Module
SinoCon Co., Ltd.
All manuals and user guides at all-guides.com

2
5
5
7
8
9
10
10
11
12
Catalog
Catalog
1. Hardware Description
1.1. Specifications
1.2. Apprearance
1.3. Indicators
1.4. Port Description
1.5. Product Dimensions
1.6. Installation Method
2. Package Contents
3. Warranty Policy
C2000-A1-SXD0020-BX3 User Manual
2 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

Copyright Notice
©2000 - 2019 SinoCon Co., Ltd. All Rights Reserved.
Trademarks
The KonNaD logo is a registered trademark of SinoCon Co., Ltd. All other trademarks or registered marks in this
manual belong to their respective manufacturers.
Disclaimer
This document only provides information about KonNaD products. No license to any intellectual property rights is
granted by this document, including any intellectual property licenses, expressed or implied, or by any means.
SinoCon assumes no responsibility other than the liability stated by SinoCon in the terms and conditions of sale of
its products and SinoCon makes no warranties regarding the sale or use of KonNaD products, including the
suitability for the specific use of the products, and marketability, and SinoCon doesn't guarantee that it won't
infringe any patent, copyright or other intellectual property rights, etc.
Information in this document is subject to change without notice and does not represent a commitment on the
part of SinoCon.
Contact US
SinoCon Co., Ltd.
Address: 16th Floor, Tower A, Zhongyin Building, Caitian Road, Futian District, Shenzhen, China
Web: www.sinoconsys.com
Tel: [phone]
C2000-A1-SXD0020-BX3 User Manual
3 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

C2000-A1-SXD0020-BX3 User Manual
4 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

1. Hardware Description
1.1. Specifications
Classification Parameter Specification
Digital Output DO Channels 2
DO Connector Terminal block
DO Type Form C
DO Mode Logic Level
Contact Capacity 30V/3A
Ethernet No. of Ports 1
Bandwidth 10/100M
Communication Distance 100m
Industrial Protocols Standard Modbus TCP Protocol
Protocol Mode Support TCP Server/Client Mode
Downstream Serial
Port
Serial Standard RS485
No. of Ports 1
Connector Terminal block
Cascade Connection/Transparent
Transmission
RS485 cascade connection
Power Power Connector Terminal block
Input Voltage 9~27VDC
Current 200mA @ 12VDC
Physical Characteristics Dimensions 75*105*30mm
Installation Din-rail or wall
Environmental Limits Operating Temperature -40℃ ~ 85℃
C2000-A1-SXD0020-BX3 User Manual
5 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

Storage Temperature -60℃ ~ 125℃
Ambient Relative Humidity 5% ~ 95% RH, non-condensing
Classification Parameter Specification
C2000-A1-SXD0020-BX3 User Manual
6 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

1.2. Apprearance
C2000-A1-SXD0020-BX3 User Manual
7 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

1.3. Indicators
Classification Indicator Description Meaning
Digital
Output
DOx Digital input
indicators
Steady on：On
Off：Off
Ethernet LINK Network status
indicator
Steady on：Network connection enabled
Flashing：Transmit or receive data
Off：The network port is not plugged into the network
cable
SPD 10/100Mbps
indicator
Steady on：100M network connected
Off：Not connected to the 100M network
Downstream
Serial Port
RXD RS485 data
receive
indicator
Steady on：RS485 line fault, please check if the positive
and negative poles of 485 line are reversed
Flashing：RS485 receiving data
Off：RS485 no receiving data
TXD RS485 data
transmit
indicator
Flashing：RS485 transmitting data
Off：RS485 no transmitting data
Power PWR Power indicator Steady on：Normal power supply
Off：No power or abnormal power supply, please check if
the voltage range is 9~27VDC
RUN RUN Running
indicator
Steady on：Device exception
Flashing：Flashes every 1 second when the device is ready
Off：Device exception
C2000-A1-SXD0020-BX3 User Manual
8 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

1.4. Port Description
Classification Port Description Recommended
wiring
Digital Output NO Digital output normally open RVV 2*1.0
COM Digital output common RVV 2*1.0
NC Digital output normally close RVV 2*1.0
Ethernet Ethernet RJ45 Ethernet port CAT-5e
Downstream Serial
Port
485+ 、
485-
RS485+, RS485- (downward) RVSP 2*1.0
Power Input V+、V- Power supply input positive, power supply input
negative
RVV 2*1.0
PE Used for reliable grounding of the device, surge
protection
RVV 2*0.5
C2000-A1-SXD0020-BX3 User Manual
9 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

1.5. Product Dimensions
unit: mm（inch）
1.6. Installation Method
C2000-A1-SXD0020-BX3 User Manual
10 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

2. Package Contents
No. Contents
1 Device (contain mounting kit) * 1
2 Terminal block * 1 set
3 Installation guide card * 1
C2000-A1-SXD0020-BX3 User Manual
11 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com

3. Warranty Policy
In the normal use of the products you purchased, free warranty service will be provided from the date of
purchase whenever the quality problems caused by raw materials or production process are concerned. However,
due to the user's failure to install, disassemble or improperly use the product according to the requirements of this
product manual, the company provides maintenance services, but charges appropriate maintenance fees. The
warranty period is as follows:
Product category Warranty Period
Shelled product 6years
Unshelled product 3years
Note: Accessories are not covered by warranty.
Warranty Terms:
1. From the date of purchase, in the case of normal use (determined by the company's authorized
technicians), the failed product will be repaired free of charge during the warranty period.
2. Products that have been repaired or modified by a maintenance personnel other than our company
during the warranty period, or that have been improperly installed, incorrectly input voltage, improperly
used, accidental events or natural disasters, etc., are not covered by the warranty.
3. Before accepting the warranty service, the customer is required to prove the date of purchase of the
product by presenting the warranty card or purchasing the invoice. Otherwise, the warranty cannot be
guaranteed.
4. For all warranty or repair products, the customer bears the risk of shipping and shipping costs.
5. If the product exceeds the warranty period or does not meet the warranty requirements, the company will
provide charge maintenance.
6. The warranty terms for customized and ODM products should be defined in the contract.
7. Other verbal commitments that conflict with this warranty would be executed with reference to this
warranty.
8. Our company's responsibility for the manufacture, sale and use of the products shall not exceed the
original cost of the products. The company does not assume any joint responsibility.
9. The right to interpret this clause belongs to the company.
C2000-A1-SXD0020-BX3 User Manual
12 / 12
SinoCon Co., Ltd. www.sinoconsys.com
All manuals and user guides at all-guides.com